USB Type C PMIC 40-TQFN (6x6) The MAX25432 combines an automotive-grade buckboost controller capable of full-range 3.3V to 21V programmable power supply (PPS) at up to 6.35A, USB Power Delivery (USB PD) analog front-end (AFE), legacy USB charging support, and USB Type-C® protection switches for automotive USB host or downstream-facing (DFP) applications. The USB TypeC protection switches provide automotive system-level ESD protection and 24V short-circuit protection for D+, D-, CC1, CC2, and VCONN. The device can optionally support legacy charging modes for older passenger phones including BC1.2, Apple® Charge, Apple CarPlay®, Apple MFi, and USB On-The-Go (OTG). The MAX25432B integrates a USB PD AFE, which supports the USB-IF Type-C Port Controller Interface (TCPCI) specification and can interface with any I2C controller in the application. The MAX25432A provides configuration channel (CC) signal pass-through protection for an external USB PD controller. P-suffix and G-suffix devices include intelligent detection and protection to avoid high short-circuit currents flowing from the car battery through the cable shield to ground during fault events, thus preventing car module damage. The MAX25432 is available in a small, 6mm x 6mm, 40- pin TQFN-EP package and requires very few external components. The MAX25432 evaluation (EV) kit and collateral provide a convenient platform to the design engineer for rapid evaluation with reduced test and firmware development time. Integrated I2C Buck-Boost Controller with PPS 4.5V to 36V Input Operating Range 3.3V to 21V Constant Voltage, 10mV LSB 1A to 6.35A Current Limit, 25mA LSB 220kHz, 300kHz, and 400kHz SwitchingFrequency VBUS Cable Compensation up to 516mΩ External Frequency Synchronization and SpreadSpectrum for Reduced EMI USB PD 3.1 Type-C Port Controller USB-IF Compliant - TID 9154 Up to 800mV Ground Offset Pairs with ADI TCPM for Turn-Key Solution MAX25432BATLP Enables: ADI TCPM Alternate Mode and Dual-Role Port Improved CC Detection Advanced Monitoring Algorithms (V, T) Dynamic Loop Control Highest Performance, Safest, and Lowest Cost Passenger Cable-Shield Short-to-Battery Protection Minimizes Short-Circuit Currents with a Small,Single-FET Solution Integrated Current-Sense Amplifiers, ADC and DAC Integrated 3.3V to 5.0V, 1.5W, Smart, Reliable VCONN Switches and Protection, 50mA to 500mA OCP Integrated 24V DC Protection on Protected HVD+, HVD-, HVCC1, HVCC2 Outputs Integrated Legacy USB 2.0 Charging Support Including BC1.2, Apple CarPlay, OTG, and Apple MFi Rev 3x Integrated ±15kV Air-Gap/±8kV Contact Discharge ISO 10605 and IEC 61000-4-2 ESD Protection -40°C to +125°C Operating Temperature Range 40-Pin, 6mm x 6mm, TQFN Package with EP AEC-Q100 and AEC-Q006 Qualified #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Single 5V..36V/±2.5V..±18V supply, 18 MHz, 48V/µs slew rate, ±80 µV offset, RRO, Fast-settling single JFET Op Amp, SOIC-8-1EP analog-devices adi operational amplifier SOIC*1EP*3.9x4.9mm*P1.27mm*

Capacitance to digital converter for proximity sensing, 1-channel, 12 bit, 0..13pF range, 2.7..3.6V supply, I²C interface, MSOP-8 Analog ADI CDC single MSOP*3x3mm*P0.5mm*

Cortex-M4 Microcontroller, TQFN-40 ARM 32-bit Cortex-M4 Maxim ADI Darwin TQFN*1EP*5x5mm*P0.4mm*EP3.5x3.5mm*

Cortex-M4 Microcontroller, TQFN-20 ARM 32-bit Cortex-M4 Maxim ADI Darwin TQFN*1EP*4x4mm*P0.5mm*EP2.7x2.7mm*

MAX3188EEUT+T SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL LCSC Part Number: C2671283 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/MAXIM(美信) MAX31889 MAX31889 is a high-accuracy digital temperature sensor from Analog Devices featuring an I²C interface and industry-leading measurement precision of ±0.25°C from -20°C to +105°C and ±0.65°C from -40°C to +125°C. Operating from a 1.7V to 3.6V supply, the device offers low power consumption with only 68µA during measurements and 0.55µA in standby mode, making it ideal for battery-powered systems. The sensor includes programmable high and low temperature alarms, a 32-word FIFO buffer for temperature data logging, configurable GPIO pins for conversion triggering and interrupt generation, and unique ROM identification for traceability. Packaged in a compact 2mm × 2mm 6-pin µDFN package, the MAX31889 is suitable for precision temperature monitoring, industrial systems, IoT devices, medical equipment, environmental sensing, and RTD replacement applications. Search Keywords: MAX31889, Analog Devices MAX31889, digital temperature sensor, I2C temperature sensor, precision temperature sensor, high accuracy temperature sensor, low power temperature sensor, industrial temperature sensor, IoT temperature sensor, environmental monitoring sensor, battery powered sensor, programmable temperature alarm, FIFO temperature sensor, RTD replacement, temperature monitoring IC, ±0.25°C temperature sensor, µDFN temperature sensor, embedded temperature sensor, thermal monitoring Hashtags: #MAX31889 #AnalogDevices #TemperatureSensor #DigitalTemperatureSensor #I2C #PrecisionSensor #ThermalMonitoring #EnvironmentalMonitoring #IndustrialElectronics #IoT #EmbeddedSystems #LowPowerDesign #BatteryPowered #Sensor #Measurement #DataLogging #Electronics #ElectronicComponents #PCBDesign #ADI

ADI ADUCM360BCPZ128-R7 LFCSP-48_L7.0-W7.0-P0.50-TL-EP5.1 LCSC Part Number: C131321 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADUCM355BCCZ-RL7 LGA-72_L6.0-W5.0-TL_ADUCM355BCCZ-RL7 LCSC Part Number: C660220 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADSP-BF512BSWZ-4 LQFP-176_L24.0-W24.0-P0.50-LS26.0-BL-EP6.0 LCSC Part Number: C659827 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADSP-BF533SBSTZ400 LQFP-176_L24.0-W24.0-P0.50-LS26.0-BL LCSC Part Number: C648528 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADSP-21489KSWZ-4B LQFP-176_L24.0-W24.0-P0.50-LS26.0-BL-EP6.0 LCSC Part Number: C514365 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADSP-21489BSWZ-4B LQFP-176_L24.0-W24.0-P0.50-LS26.0-BL-EP6.0 LCSC Part Number: C514364 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADSP-BF532SBSTZ400 LQFP-176_L24.0-W24.0-P0.50-LS26.0-BL LCSC Part Number: C415470 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADAU1452WBCPZ-RL LFCSP-72_L10.0-W10.0-P0.50-TL-EP6.0 LCSC Part Number: C462188 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADAU1701JSTZ-RL LQFP-48_L7.0-W7.0-P0.50-LS9.0-TL LCSC Part Number: C389590 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADAU1452WBCPZ LFCSP-72_L10.0-W10.0-P0.50-LS10.2-BL-EP5.3 LCSC Part Number: C403699 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADAU1450WBCPZ LFCSP-72_L10.0-W9.8-P0.50-LS10.2-TL-EP5.5 LCSC Part Number: C191335 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI LTC4281CUFD#PBF QFN-28_L5.0-W4.0-P0.50-BL-EP LCSC Part Number: C687943 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

ADI LTC4281IUFD#TRPBF QFN-28_L5.0-W4.0-P0.50-BL-EP LCSC Part Number: C687946 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADUC812BSZ-REEL MQFP-52_L10.0-W10.0-P0.65-LS14.0-BL LCSC Part Number: C404332 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI ADUC848BSZ32-5 MQFP-52_L10.0-W10.0-P0.65-LS14.0-BL LCSC Part Number: C496510 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI LTC4261CUFD-2#PBF VQFN-24_L5.0-W4.0-P0.50-BL-EP LCSC Part Number: C687831 JLCPCB Part Class: Extended Part Manufactured by Analog Devices

ADI ADAU1401AWBSTZ LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL LCSC Part Number: C208274 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI LTC4281IUFD#PBF QFN-28_L5.0-W4.0-P0.50-BL-EP LCSC Part Number: C687945 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)

ADI LTC4261CUFD#PBF VQFN-24_L5.0-W4.0-P0.50-BL-EP LCSC Part Number: C687829 JLCPCB Part Class: Extended Part Manufactured by Analog Devices