I²C Controlled Single Cell Fast Charger with MaxCharge™ Technology for High Input Voltage and Adjustable Voltage 3.1A Boost Operation The bq25895M is a highly-integrated 5-A switchmode battery charge management and system power path management device for single cell Li-Ion and Lipolymer battery. The devices support high input voltage fast charging. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I 2C Serial interface with charging and system settings makes the device a truly flexible solution. • High Efficiency 1.5-MHz Switch Mode Buck Charge – 93% Charge Efficiency at 2 A and 91% Charge Efficiency at 3 A Charge Current – Optimize for High Voltage Input (9 V / 12 V) – Low Power PFM mode for Light Load Operations • Boost Mode Operation with Adjustable Output from 4.5 V to 5.5 V – Selectable 500-KHz / 1.5-MHz Boost Converter with up-to 3.1 A Output – 93% Boost Efficiency at 5 V at 1 A Output – Support down-to 2.5V Battery – Support PWM only or PFM/PWM control for Light Load Efficiency • Integrated Control to Switch Between Charge and Boost Mode • Single Input to Support USB Input and Adjustable High Voltage Adapters – Support 3.9-V to 14-V Input Voltage Range – Input Current Limit (100 mA to 3.25 A with 50- mA resolution) to Support USB2.0, USB3.0 standard and High Voltage Adapters – Maximum Power Tracking by Input Voltage Limit up-to 14V for Wide Range of Adapters – Auto Detect USB SDP, CDP, DCP, and Nonstandard Adapters • Input Current Optimizer (ICO) to Maximize Input Power without Overloading Adapters • Resistance Compensation (IRCOMP) from Charger Output to Cell Terminal • Highest Battery Discharge Efficiency with 11-mΩ Battery Discharge MOSFET up to 9 A • Integrated ADC for System Monitor (Voltage, Temperature, Charge Current) • BATFET Control to Support Ship Mode, Wake Up, and Full System Reset • Flexible Autonomous and I 2C Mode for Optimal System Performance • High Integration includes all MOSFETs, Current Sensing and Loop Compensation • 12-µA Low Battery Leakage Current to Support Ship Mode • High Accuracy – ±0.5% Charge Voltage Regulation – ±5% Charge Current Regulation – ±7.5% Input Current Regulation #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Three-Terminal Fixed Positive Voltage Regulator The LM7812T is a three-terminal fixed positive linear voltage regulator IC designed to provide a stable +12V DC output from a higher input voltage source. It belongs to the widely used 78xx series regulators, where “12” indicates the fixed output voltage of 12 volts. It is commonly used in power supply circuits, embedded systems, and electronic devices that require a simple, reliable regulated 12V rail without the complexity of external components. The device operates as a linear regulator, meaning it reduces voltage by dissipating excess energy as heat, so proper heatsinking is often required for higher current loads. Key Features of LM7812T Fixed +12V output voltage Output current up to 1A–1.5A (depending on package and cooling) Input voltage range up to ~35V max Built-in thermal shutdown protection Internal current limiting and short-circuit protection Safe-area compensation for reliable operation No external components required for basic operation Good line and load regulation Low quiescent current (~8 mA typical) Available in TO-220 / TO-3 packages (LM7812T variants) Typical Applications DC power supplies (12V regulated rail) Arduino and microcontroller systems Industrial control electronics Sensor and communication circuits Battery-powered systems requiring stable 12V Audio amplifiers and small motor control circuits #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a fully integrated switch-mode buck-boost charger for 1-4 cell Li-ion batteries and Li-polymer batteries. The integration includes 4 switching MOSFETs (Q1, Q2, Q3, Q4), input and charging current sensing circuits, the battery FET (QBAT) and all the loop compensation of the buck-boost converter. It uses NVDC power path management, regulating the system slightly above the battery voltage without dropping below a configurable minimum system voltage. When system power exceeds the input source rating, battery supplement mode supports the system without overloading the input source. BQ25792 supports the full input and output (OTG) voltage ranges for USB Type-C™ and USB power delivery (USB-PD) applications. • High power density, high integration buck-boost charger for 1-4 cell batteries supporting any USB PD 3.0 profile – Integrates four switching MOSFETs, BATFET – Integrates input and charging current sensing • Highly efficient – 750-kHz or 1.5-MHz switching frequencies – 5-A charging current with 10-mA resolution • 96.5% efficient: 16-V battery at 3A from 20V • Supports a wide range of input sources – 3.6-V to 24-V wide input operating voltage range with 30-V absolute maximum rating – Maximum power tracking with input voltage dynamic power management (VINDPM) up to 22 V and input current dynamic power management (IINDPM) up to 3.3 A – Detects USB BC1.2, SDP, CDP, DCP, HVDCP and non-standard adapters • Dual-input power mux controller (optional) for source selection • Narrow voltage DC (NVDC) power path management • Powers USB port from battery (USB OTG) – 2.8-V to 22-V OTG output voltage with 10-mV resolution to support USB-PD PPS – OTG output current regulation up to 3.32 A with 40-mA resolution • Flexible autonomous and I2C mode for optimal system performance • Integrated 16-bit ADC for voltage, current, and temperature monitoring • Low battery quiescent current – 21 µA for battery only operation – 600 nA in Charger Shutdown Mode • High accuracy – +0.65% to -0.85% charge voltage regulation for 2S-4S batteries – ±5% charge current regulation – ±5% input current regulation • Safety – Thermal regulation and thermal shutdown – Input/battery OVP and OCP – Converter MOSFETs OCP – Charging safety timer • Package – 29-Pin 4 mm × 4 mm QFN #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-Charger

BQ25798RQMR QFN-29_L4.0-W4.0-P0.40-TL-BQ25792RQMR LCSC Part Number: C2876593 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments BQ25798 fully integrated switch-mode buck-boost battery charger for 1-4 cell Li-ion and Li-polymer batteries, supports USB PD 3.0 power profile, integrates four switching MOSFETs, BATFET, input and charging current sensing, 3.6V to 24V input operating range with 30V absolute maximum, 750kHz or 1.5MHz switching frequency, up to 5A charging current with 10mA resolution, up to 96.5% efficiency, supports MPPT for photovoltaic charging, USB BC1.2/HVDCP/non-standard adapter detection, NVDC power path management, USB OTG output from 2.8V to 22V up to 3.32A, I2C control, integrated 16-bit ADC, low quiescent current, thermal regulation, OVP/OCP protection, safety timer, 29-pin 4x4mm QFN package. Search Keywords: BQ25798, Texas Instruments BQ25798, TI BQ25798, BQ25798 battery charger, BQ25798 buck boost charger, BQ25798 Li-ion charger, BQ25798 Li-polymer charger, 1-4 cell battery charger, USB PD 3.0 battery charger, buck boost charger IC, NVDC power path charger, MPPT battery charger IC, photovoltaic battery charger, USB OTG charger IC, 5A charging current charger, I2C battery charger, BQ25798 QFN-29, 4x4mm QFN charger, BQ25798 datasheet Hashtags: #BQ25798 #TexasInstrumentsBQ25798 #TIBatteryCharger #BatteryChargerIC #BuckBoostCharger #LiIonCharger #LiPolymerCharger #1to4CellCharger #USBPDCharger #USBPD30 #NVDCCharger #PowerPathManagement #MPPTCharger #PhotovoltaicCharger #USBOTGCharger #5ACharger #I2CCharger #IntegratedADC #QFN29 #4x4mmQFN

The TPAP2112K-3.3TRG1 is a low-dropout linear voltage regulator designed to provide a stable regulated output voltage for low-power electronic systems. This device is optimized for applications requiring low noise, low quiescent current, and compact PCB implementation in portable and embedded electronics. The regulator delivers reliable voltage regulation with minimal external component requirements, making it suitable for battery-powered devices, microcontroller systems, wireless modules, sensor interfaces, and general-purpose analog and digital power rails. Its low-dropout architecture enables efficient operation even when the input voltage is close to the regulated output voltage, helping extend battery life in portable applications. The TPAP2112K-3.3TRG1 integrates internal protection features such as current limiting and thermal shutdown to improve system reliability and protect downstream circuitry from abnormal operating conditions. Its compact surface-mount package supports high-density PCB layouts and automated manufacturing processes. Engineering Specification Device Type Low-dropout linear voltage regulator Regulator Topology Positive fixed-output LDO regulator Output Voltage Fixed regulated voltage output Input Characteristics Designed for low-voltage DC input operation Dropout Characteristics Low-dropout voltage architecture for efficient regulation Output Performance Stable low-noise voltage regulation Quiescent Current Low standby current suitable for portable systems Protection Features Current limiting Thermal shutdown Short-circuit protection Thermal Characteristics Efficient thermal operation for compact embedded systems Stability Characteristics Stable operation with standard external capacitors Package Type Surface-mount package Mounting Style Surface mount technology Applications Embedded systems Battery-powered devices Wireless modules Sensor power rails Microcontroller systems Portable electronics IoT hardware Consumer electronics Industrial control systems Analog signal conditioning Manufacturer Commonly associated with 3PEAK or compatible power management vendors #commonpartslibrary #ldoregulator #voltageregulator #powermanagement #powersupply #embeddedhardware #powerelectronics #surfaceountcomponents #electronicsdesign #portableelectronics #iothardware #analogdesign #batterypowered #industrialelectronics #lowpowerelectronics

The BQ25750 is a wide input voltage, switched-mode buck-boost Li-Ion, Li-polymer, or LiFePO 4 battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with accurate charge current and charge voltage regulation, in addition to automatic charge preconditioning, termination, and charge status indication. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use. In reverse mode, the device draws power from the battery and regulates the SYS terminal voltage.

Linear Voltage Regulator IC Positive Fixed 1 Output 150mA SOT-23-5 LP2985IM5-2.7 is a low-dropout (LDO) linear voltage regulator designed to provide a stable 2.7 V output with very low quiescent current and excellent noise performance. It is optimized for battery-powered and noise-sensitive applications, offering high power supply rejection ratio (PSRR) and fast transient response. The device is housed in a compact SOT-23-5 package, making it ideal for space-constrained designs. Key Features Fixed 2.7 V output voltage Low dropout voltage Low quiescent current (IQ) High PSRR for noise-sensitive applications Stable with low ESR ceramic capacitors Thermal shutdown and current limit protection Small SOT-23-5 package RoHS compliant Electrical Characteristics Output Voltage: 2.7 V (fixed) Output Voltage Accuracy: ±1.5% (typical) Maximum Output Current: 150 mA Dropout Voltage: ~280 mV at 150 mA (typical) Quiescent Current (IQ): ~65 µA (typical) Line Regulation: 0.04%/V (typical) Load Regulation: 0.2% (typical) PSRR: Up to 70 dB (at low frequency) Operating Input Voltage Range: 2.5 V to 16 V Operating Temperature Range: -40°C to +125°C Mechanical Characteristics Package Type: SOT-23-5 (DBV) Mounting Type: Surface Mount Pin Count: 5 pins Approximate Dimensions: 2.9 mm × 1.6 mm Pin Configuration (Typical) IN: Input voltage GND: Ground OUT: Regulated output (2.7 V) EN: Enable (active high) BYPASS: Noise reduction / bypass capacitor connection Performance Characteristics Excellent output noise performance (low-noise design) Fast transient response to load changes Stable with small ceramic capacitors (typically 1 µF) Suitable for RF and analog circuits Applications Battery-powered devices Portable electronics RF and wireless modules Sensors and analog circuits Microcontroller power supplies #CommonPartsLibrary #IntegratedCircuit #PowerManagement #voltage-regulator #LDO #LP3985