This is a BLE to WiFi gateway Reference Design. It employs an ESP32 microcontroller and an STM32WB5MMGH6TR for BLE functionality. The design includes connectors, multiple capacitors, resistors, switches, and LEDs. USB Type-C is used for power and data. This could be used for IoT purposes in home automation or wireless sensor data transmission. #referenceDesign #edge-computing #espressif #stm #template #ble #reference-design

This is a BLE to WiFi gateway Reference Design. It employs an ESP32 microcontroller and an STM32WB5MMGH6TR for BLE functionality. The design includes connectors, multiple capacitors, resistors, switches, and LEDs. USB Type-C is used for power and data. This could be used for IoT purposes in home automation or wireless sensor data transmission. #referenceDesign #edge-computing #espressif #stm #template #ble #reference-design

This is a BLE to WiFi gateway Reference Design. It employs an ESP32 microcontroller and an STM32WB5MMGH6TR for BLE functionality. The design includes connectors, multiple capacitors, resistors, switches, and LEDs. USB Type-C is used for power and data. This could be used for IoT purposes in home automation or wireless sensor data transmission. #referenceDesign #edge-computing #espressif #stm #template #ble #reference-design

This is a BLE to WiFi gateway Reference Design. It employs an ESP32 microcontroller and an STM32WB5MMGH6TR for BLE functionality. The design includes connectors, multiple capacitors, resistors, switches, and LEDs. USB Type-C is used for power and data. This could be used for IoT purposes in home automation or wireless sensor data transmission. #referenceDesign #edge-computing #espressif #stm #template #ble #reference-design

This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #edge-computing #edgeComputing #espressif #template

This project involves designing a power supply circuit using the MP2338GTL step-down converter, featuring various resistors, inductors, and capacitors to regulate and filter the output voltage. #referenceDesign #powermanagement #template #reference-design #MP2338 #monolithicpower

This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #reusable #module #edge-computing #edgeComputing #espressif #template

This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

This project uses an Arduino Mega microcontroller connected to 5 flexible sensors and a mini speaker with position and acceleration sensors to create an interactive device. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ArduinoMega #flexSensors #miniSpeaker #motionSensor #IoT #edgeComputing #reusable #module #Arduino #template

This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

This project uses an ESP32 microcontroller and OV2640 camera to create a WiFi-enabled digital camera. It uses AMS1117 voltage regulators to provide regulated power, a CH340C for USB communication, and includes capacitors and resistors for circuit balance. Ideal for IoT and edge computing tasks. #referenceDesign #project #ESP32 #ESP32WROVER #RF #WIFI #MCU #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

Production-grade 9-cell supercapacitor power module based on the locked KiCad architecture: Vishay 235 EDLC series stack with passive resistor balancing, a lower 6-cell custom bottom board plus upper board continuation, high-current copper zones, direct bus interfaces, and no potting.

Here is a simple USB powered lamp that can be used to light your desktop during power failures. The circuit operates from the 5 Volt available from the USB port. The 5V from the USB port is passed through current limiting resistor R2 and transistor Q1. The base of transistor Q1 is grounded via R1 which provides a constant bias voltage for Q1 together with D2. The diode D1 prevents the reverse flow of current from battery. C1 is used as a noise filter. Two white LED’s are used here for the lamp, you can also use a 2 V torch bulb instead of LED’s. LED D3 indicates connection with USB port.

Here is a simple USB powered lamp that can be used to light your desktop during power failures. The circuit operates from the 5 Volt available from the USB port. The 5V from the USB port is passed through current limiting resistor R2 and transistor Q1. The base of transistor Q1 is grounded via R1 which provides a constant bias voltage for Q1 together with D2. The diode D1 prevents the reverse flow of current from battery. C1 is used as a noise filter. Two white LED’s are used here for the lamp, you can also use a 2 V torch bulb instead of LED’s. LED D3 indicates connection with USB port.

SmartDeskPet v1.0 Shield Stage 1 status: - Goal: 5V input -> dual AMS1117-3.3 rails (+3V3_MCU and +3V3_WIFI) with common GND. - Note: Keep power nets explicitly named (avoid unnamed nets) to keep ERC happy. Stage 1 completion checklist: - Mark J1 Pin_1 (+5V) as a Power Output pin to satisfy ERC power-driver checks. - Verify all GND symbols/returns are on the same GND net. - Keep +5V_SERVO isolated from the main +5V net (only share GND). Stage 2 preparation notes (MPN/LCSC + layout constraints): - MPN/LCSC targets to define before Stage 2 exit: - AMS1117-3.3 (SOT-223): set exact MPN and (optionally) LCSC PN for both U1 and U2. - 100nF capacitor (0603): set MPN/LCSC for all 0603 100nF decouplers. - 4.7k resistor (0603): set MPN/LCSC for I2C pull-ups R1 and R2. - 1000uF bulk capacitor (radial): set MPN/LCSC for C7 (CP_Radial_D10.0mm_P5.00mm). - DC005 power jack/regulator input: select exact DC005 footprint + MPN/LCSC (if used). - 2.54mm headers/sockets: set MPN/LCSC for H1, H2, J1, J3, J4, J5, P3, P4, P5, and J2. - ESP-01S antenna keepout: - Reserve a copper keepout under and in front of the ESP-01S onboard antenna. - No copper pours/traces/components in the antenna region (top and bottom) per module guidelines. - H1/H2 header spacing: - Maintain 1000 mil spacing between H1 and H2 header centerlines (shield mechanical requirement). - Silkscreen placeholders: - Add silkscreen labels for: 5V IN, GND, +3V3_MCU, +3V3_WIFI, SERVO1, SERVO2, I2C SDA/SCL, DHT11, ASRPRO UART2, ESP-01S UART3. - Add placeholder text for: MPN, LCSC, board revision, and date code. Stage 3 layout constraints (placement and routing guidance): - Connector placement strategy: - Place H1 and H2 first to lock the shield mechanical interface; enforce 1000 mil spacing. - Place J1 and any DC005 input at the board edge for easy access. - Designated power area planning: - Group U1, U2, and C7 near the 5V entry point; keep high-current 5V and regulator loops short. - Use wide copper for +5V and any servo supply; stitch GND around power section. - Antenna keepout boundaries: - Place J2 (ESP-01S socket) at a board edge with the antenna facing outward. - Enforce a top-and-bottom copper keepout in the antenna region; keep noisy power traces away.

This project is a QRE1113 opto-reflective sensor circuit, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #referenceDesign #industrialsensing #onsemi #template #reference-design

4×4 cm USB-C PD & Qi Wireless Power Bank with Li-Po Charging, Power-Path Management, 3.3 V LDO, Full-Bridge Gate Driver, LED Resistors, and Corrected 5 V Output Feedback (Schematic Cleaned: Redundant Net Portals/Passives Removed, Fuel-Gauge LED Channels Verified, ERC/DRC Issues Resolved)

This project is a Switched-Mode Power Supply (SMPS) design. The design incorporates an AC DC Converter (NCP1203D100R2), polarized capacitors, resistors, diodes, connectors, a transistor, a transformer and an integrated circuit. #AC #DC #POWER #NCP1203 #project

This Gerber file contains the necessary information for fabricating the PCB design of a Bluetooth-enabled headphone. The design includes multiple layers, showcasing the electrical connections and component placements on both the top and bottom layers. Top Layer (Copper traces and components): The top copper layer is primarily responsible for routing the signals from key components such as the ESP32 module, MAX98357A audio amplifier, and the microphone. The ESP32 module, responsible for Bluetooth communication, is positioned centrally to optimize signal flow and minimize interference. Decoupling capacitors (100nF) are placed near critical components to ensure signal stability and noise suppression. Audio signal paths, as well as power distribution, are carefully routed to prevent cross-talk and ensure high-quality sound. Bottom Layer (Copper traces): The bottom layer contains the ground plane and additional routing for power and signal connections. The charging module (TP4056) and voltage regulator (AMS1117) are placed to manage power distribution, ensuring stable battery charging and regulated output for the ESP32 and other components. Connections to external interfaces such as the MicroSD breakout and auxiliary input are routed efficiently to avoid conflicts. Additional Components: All critical components are labeled, including decoupling capacitors (100nF) and resistors where needed, as well as external interfaces like the MicroSD card breakout. Mounting holes are provided for secure installation in a headphone casing, ensuring the board can be integrated seamlessly into the final product. The PCB is designed to minimize noise, with short signal paths and proper grounding for high-fidelity audio performance. This Gerber file ensures accurate manufacturing by containing data for copper layers, silkscreen, solder mask, and drill files.

This project is a battery charging circuit utilizing a MAX1551 chip. It features a USB and DC power input, with LED status indicators. The design is outfitted with necessary decoupling capacitors and resistors to ensure smooth operation. #project #Template #charger #referenceDesign #batterycharger #MAX1551 #template #bms #analog

This project is a battery charging circuit utilizing a MAX1551 chip. It features a USB and DC power input, with LED status indicators. The design is outfitted with necessary decoupling capacitors and resistors to ensure smooth operation. #project #Template #charger #referenceDesign #batterycharger #MAX1551 #template #bms #analog

This project is a battery charging circuit utilizing a MAX1551 chip. It features a USB and DC power input, with LED status indicators. The design is outfitted with necessary decoupling capacitors and resistors to ensure smooth operation. #project #Template #charger #referenceDesign #batterycharger #MAX1551 #template #bms #analog

This project is a doorbell system reference design with an integrated camera. It leverages an ESP32 microcontroller for processing, along with various components including resistors, buzzers, and transistors. The system also features a charging circuitry with a USB-C connection for power supply. #referenceDesign #edge-computing #edgeComputing #SeeedStudio #template #iot #esp32#camera #reference-design

Single-subsystem 3.3 V synchronous buck-boost regulator reference built around the TI TPS63802DLAR in a 10-pin VSON package. The design accepts a VBUS input rail into VIN, uses a Bourns SRP4020TA-4R7M 4.7 µH power inductor between L1/L2, and generates PP3V3 from the adjustable TPS63802 output path. The TPS63802 metadata lists a 1.3 V to 5.5 V input range, 2 A output current, selectable switching-frequency modes around 1.4 MHz to 2.1 MHz, and -40 °C to +125 °C junction operation. Support circuitry includes 22 µF and 1 µF ceramic input/output capacitors, a 511 kΩ / 91 kΩ feedback divider for the PP3V3_FB node, a VBUS-derived enable divider using 93.1 kΩ and 100 kΩ resistors, MODE tied to GND, and a 100 kΩ pull-up from PP3V3 to the power-good output. Intended as a reusable compact 3.3 V buck-boost power-supply module for USB, battery, portable, IoT, or embedded sensor designs.