N-Channel 30 V 161A (Tc) 140W (Tc) Surface Mount TO-252AA (DPAK) The IRLR7843TRPBF is an N-channel power MOSFET built on Infineon's HEXFET technology platform, originally developed by International Rectifier. It is designed as a low-voltage, high-current switching device intended for applications where minimizing conduction loss and maximizing efficiency are primary design goals. The part is particularly well suited to synchronous switching topologies, where pairs or arrays of MOSFETs alternately conduct to regulate power flow with minimal energy dissipation. This device targets high-density power conversion applications where board space is limited but current demands are substantial, such as notebook computer power delivery, point-of-load converters used in servers, and advanced telecom and datacom equipment. It is commonly found supporting synchronous buck converter stages that step down a higher input rail to a lower output voltage suitable for powering processors, memory, and other low-voltage digital logic. Its low on-resistance characteristic allows it to carry significant current while generating comparatively little resistive heating, which is essential in compact enclosures with constrained thermal budgets. The transistor is fabricated using a refined trench gate process that improves upon earlier HEXFET generations, offering reduced gate charge and lower switching losses alongside its low conduction resistance. This combination makes it effective in both the high-side and low-side positions of a synchronous switching cell, where fast, clean transitions reduce overlap losses and improve overall converter efficiency. The device also offers well-characterized avalanche energy ratings, giving designers confidence in its ruggedness when exposed to transient overvoltage events that can occur during switching, and it presents a very low gate impedance, allowing it to be driven efficiently by standard gate driver circuitry. Mechanically, the part is housed in a surface-mount power package with an exposed tab for enhanced thermal conduction to the host PCB, allowing heat generated during operation to be efficiently transferred away from the silicon die. This package style is widely used in power-dense designs where through-hole packages would be impractical. The device is supplied in a tape-and-reel format suitable for automated assembly and is compliant with RoHS material restrictions, reflecting current environmental and regulatory standards for electronic components. Spec Sheet Identification Part Number: IRLR7843TRPBF Device Family: HEXFET Power MOSFET Manufacturer: Infineon Technologies Functional Classification Device Type: Power MOSFET Channel Type: N-channel Technology: Trench-gate HEXFET (IR MOSFET legacy technology) Logic Level Compatibility: Logic-level gate drive compatible Electrical Characteristics Drain-to-Source Voltage Rating: Low-voltage class, optimized for sub-30V rail applications On-Resistance: Ultra-low on-resistance class Drain Current Capability: High continuous current class Gate Charge: Low gate charge, optimized for fast switching Gate Impedance: Ultra-low gate impedance Avalanche Characteristics: Fully characterized avalanche voltage and current rating Switching & Application Behavior Primary Application: Synchronous buck converter switching stages Suitable Position: High-side and low-side switch positions Target Use Cases: Point-of-load conversion, notebook power delivery, telecom/datacom power systems Thermal & Mechanical Package Type: Surface-mount power package with exposed thermal tab (DPAK-style) Mounting: Surface mount technology (SMT) Thermal Path: Tab-based conduction to PCB for heat dissipation Environmental & Qualification RoHS Compliance: Yes Lifecycle Status: Active production Packaging Format Supply Format: Tape-and-reel, per part suffix designation #IRLR7843 #Infineon #HEXFET #PowerMOSFET #NChannelMOSFET #SynchronousBuck #PowerElectronics #DCDCConverter #PointOfLoad #PowerConversion #DPAK #SMTPackage #RoHSCompliant #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #PowerDensity #LowRDSon #DiscreteSemiconductor #commonpartslibrary #transistor

USB-C (USB TYPE-C) Receptacle Connector 24 (6+18 Dummy) - Power Only 6 Pin Position Surface Mount, Right Angle; Through Hole The 2479774-2 specification defines the engineering requirements for a high-density electronic connector assembly intended for board-to-cable or board-to-board interconnection in advanced electronic systems. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure reliable signal transmission, stable mechanical engagement, and long-term durability in demanding electronic applications. The component is intended for use in systems requiring compact interconnect solutions with high signal integrity and robust mechanical retention. It is suitable for applications such as industrial electronics, communication systems, embedded control units, and high-performance electronic assemblies where reliable connectivity and repeatable mating performance are required. Engineering Requirements The connector assembly shall be manufactured using precision-formed conductive materials and high-strength insulating housing materials to ensure stable electrical performance and mechanical reliability. The design shall support secure mating engagement and consistent signal continuity across repeated connection cycles. Electrical characteristics shall ensure low contact resistance, stable signal integrity, and reliable conductivity under defined operating conditions. The connector shall maintain performance under mechanical vibration, thermal variation, and environmental stress conditions typical of industrial and embedded system applications. Mechanical construction shall ensure accurate alignment between mating interfaces, secure locking engagement, and resistance to accidental disconnection. The design shall support repeated mating cycles without degradation of electrical or mechanical performance. Workmanship shall be free from defects such as contamination, deformation, plating irregularities, or structural inconsistencies that could impact reliability or functionality. Manufacturing and inspection shall be conducted under controlled quality systems using calibrated equipment to ensure compliance with engineering requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures prior to implementation. Documentation Supporting documentation shall include engineering drawings, connector datasheets, material declarations, inspection records, qualification test reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through formal engineering change control procedures. Each revision shall undergo technical evaluation, validation, and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #Connector #HighDensityInterconnect #ElectronicComponents #SignalIntegrity #EmbeddedSystems #IndustrialElectronics #Manufacturing #QualityAssurance #EngineeringDocumentation

1 µF ±10% 16V Ceramic Capacitor X7R 0603 (1608 Metric) The CGA3E1X7R1C105K080AC is a multilayer ceramic chip capacitor designed for high-reliability electronic applications requiring stable capacitance characteristics, compact form factor, and dependable performance under varying operating conditions. The component utilizes advanced ceramic dielectric technology to provide consistent electrical behavior with low losses and high insulation resistance suitable for signal filtering, decoupling, bypassing, and general-purpose circuit stabilization. The capacitor is constructed with a multilayer monolithic structure that enables high capacitance density while maintaining excellent mechanical integrity and thermal stability. Its surface-mount configuration supports automated assembly processes and high-density printed circuit board layouts commonly used in industrial, automotive, telecommunications, and consumer electronic systems. The dielectric system is engineered to maintain capacitance stability across a broad temperature range and varying electrical conditions while minimizing impedance and noise within electronic circuits. The component exhibits reliable frequency response characteristics and supports efficient suppression of voltage fluctuations and electromagnetic interference in high-speed and high-frequency applications. External terminations are designed to provide strong solderability, mechanical durability, and resistance to thermal cycling stresses during assembly and operation. The component is compatible with standard reflow soldering processes and is intended for long-term operation in environments subject to temperature variation, vibration, and electrical loading. The CGA3E1X7R1C105K080AC is suitable for use in power management circuits, communication equipment, embedded control systems, automotive electronics, and other applications requiring compact passive components with stable electrical performance and high reliability. #CommonPartsLibrary #CeramicCapacitors

Mid-Range Relays, 2 Form C, DPDT, 2 C/O, Coil Suppression Diode, Gold Terminal Plating, 5 A, 28 VDC Coil Voltage, CII FCB-205 Series The M83536/2-024M is a hermetically sealed electromechanical power relay built to comply with the MIL-PRF-83536 military specification family, a standard governing high-reliability relays intended for use in demanding military, aerospace, and defense electronic systems. Devices manufactured under this specification series are designed to meet stringent requirements for mechanical ruggedness, electrical performance consistency, and long-term reliability under the extreme vibration, shock, temperature cycling, and altitude conditions typically encountered in airborne, shipboard, and ground military platforms. This relay is configured as a double-pole, double-throw switching device, meaning it provides two independently switched sets of contacts that can each connect to one of two possible circuit paths, controlled by a single energized coil. This configuration is commonly used in applications requiring simultaneous switching of two separate circuits, such as redundant power path switching, dual-channel signal routing, or coordinated control of multiple subsystems from a single control signal. The relay operates on momentary, non-latching actuation, meaning the contacts return to their de-energized state as soon as coil power is removed, rather than remaining in their last-commanded position. The coil is designed for direct-current control voltage typical of military and aerospace 28-volt electrical systems, a standard power bus voltage used extensively in aircraft, military vehicles, and shipboard electrical systems. The device's flange-style mounting construction allows it to be securely fastened to a chassis or panel, providing the mechanical stability needed to maintain reliable contact performance under the sustained vibration and shock loading common in military platform environments. Internal contact construction uses a silver-cadmium-oxide contact material, chosen for its strong arc-resistance and resistance to contact welding under repeated switching of inductive or resistive loads. As a hermetically sealed device manufactured to a formal military specification, the relay undergoes rigorous qualification and lot-acceptance testing to verify long-term mechanical and electrical performance, including extended life-cycle switching tests, vibration and shock qualification, and environmental exposure testing. This makes the part suitable for use in flight-critical, mission-critical, or other high-reliability electromechanical switching applications where field failure is not an acceptable risk. The relay is supplied with through-hole solder-pin terminations for both coil and contact connections, supporting traditional through-hole assembly methods consistent with the conservative, well-proven manufacturing processes favored in military and aerospace hardware production. Spec Sheet Identification Part Number: M83536/2-024M Specification Family: MIL-PRF-83536 Manufacturer: TE Connectivity (CII) Functional Classification Device Type: Electromechanical power/signal relay Contact Configuration: Double-pole, double-throw (DPDT) Actuation Type: Momentary, non-latching Coil Input Type: DC control Electrical Characteristics Coil Voltage: Military-standard 28V DC class Coil Resistance: Moderate coil resistance class Contact Rating: Mid-range current switching class Contact Voltage Rating: Compatible with 28V DC and standard AC switching voltages Output Type: AC/DC switching capable Contact & Construction Details Contact Material: Silver-cadmium-oxide (AgCdO) Contact Form: 2 Form C (DPDT, normally open/normally closed) Sealing: Hermetically sealed construction Mounting Style: Flange mount, through-hole Environmental & Qualification Specification Compliance: MIL-PRF-83536 military relay specification Application Class: Military and aerospace electromechanical switching Export Classification: EAR99 export control classification RoHS Compliance: Yes Mechanical Specifications Termination: Solder pin, through-hole Mounting Type: Through-hole, flange-mounted Build Style: Mid-range relay form factor consistent with the M83536 family Packaging Supply Format: Individually packaged per military relay handling and ESD protection standards #M83536 #TEConnectivity #MilitaryRelay #AerospaceRelay #MILPRF83536 #DPDTRelay #ElectromechanicalRelay #HermeticallySealed #PowerRelay #SignalRelay #DefenseElectronics #AviationElectronics #FlangeMount #ThroughHole #MilAeroComponent #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #HighReliabilityRelay

+/-24V PGA I/P 24-BIT 256KSPS DA The ADAQ7767-1BBCZ is a high-performance, precision data acquisition (DAQ) µModule® system from Analog Devices. It integrates a 24-bit sigma-delta analog-to-digital converter (ADC), signal conditioning, and essential analog front-end components into a compact package. Designed for high accuracy and ease of use, it significantly reduces design complexity, layout effort, and noise sensitivity in precision measurement systems. This device is optimized for applications requiring high resolution, low noise, and excellent DC performance, such as industrial automation, instrumentation, and test equipment. Key Features 24-bit resolution sigma-delta ADC Integrated analog front end (AFE) Low noise, high dynamic range performance Programmable gain amplifier (PGA) Wide input bandwidth Low drift and high linearity SPI-compatible serial interface Internal reference and buffer options Compact system-in-package (SiP) design Electrical Characteristics Resolution: 24 bits Sampling Rate: Up to 256 kSPS (depending on configuration) Input Type: Differential Input Voltage Range: ±VREF (dependent on configuration) Signal-to-Noise Ratio (SNR): ~108 dB (typical) Total Harmonic Distortion (THD): Low distortion performance Reference Voltage: Internal or external supported Power Requirements Analog Supply Voltage (AVDD): 4.5 V to 5.5 V (typical) Digital Supply Voltage (DVDD): 1.8 V to 3.3 V Power Consumption: Optimized for precision applications Interface Communication: SPI-compatible serial interface Data Output: Serial digital output Control: Register-based configuration Package Information Package Type: µModule® (BGA) Package Code: BBCZ Mounting Type: Surface mount Compact footprint for space-constrained designs Operating Conditions Operating Temperature Range: -40°C to +85°C (industrial grade) Storage Temperature Range: -65°C to +150°C Applications Industrial process control Data acquisition systems Precision instrumentation Test and measurement equipment Medical instrumentation Energy monitoring systems Advantages Reduces PCB design complexity Minimizes noise and parasitic effects Factory-optimized signal chain performance Faster time-to-market

Polymeric PTC Resettable Fuse 12V 7 A Ih Surface Mount 2920 (7351 Metric), Concave The 2920L700/12MR specification defines the engineering requirements for a resettable protection component used in electronic circuit applications. It establishes the functional, mechanical, electrical, and environmental expectations necessary to ensure reliable performance under normal and fault conditions. The specification serves as the governing reference for design validation, manufacturing control, and quality assurance activities associated with the component. This component is intended for use in electronic systems requiring overcurrent protection and automatic recovery functionality. It is designed to respond to abnormal current conditions by limiting current flow and returning to a stable state once the fault condition is removed. The design ensures long-term stability, consistent performance, and compatibility with standard electronic assembly processes. Engineering Requirements The component shall be manufactured using approved materials and controlled processes that ensure stable electrical behavior and mechanical integrity. Construction shall support consistent operation under specified environmental and electrical stress conditions without degradation of performance. All workmanship shall be free from defects such as cracks, contamination, deformation, or material inconsistencies that may impact functionality. The component shall maintain stable performance across its intended operating range and shall be suitable for automated assembly processes. Inspection and verification activities shall be conducted using calibrated equipment and validated measurement methods. Any deviation from this specification shall require formal engineering review and documented approval prior to acceptance or implementation. Documentation All supporting documentation shall include engineering drawings, material declarations, inspection records, test results, and controlled manufacturing procedures. Documentation shall be maintained under strict revision control to ensure traceability and compliance with internal quality systems. Revision Control Any modification to this specification shall follow the established engineering change management process. All changes shall be reviewed for technical impact, validated for compliance, and approved prior to release. #EngineeringSpecification #ElectronicProtection #ResettableDevice #CircuitProtection #ElectricalEngineering #QualityAssurance #Manufacturing #Compliance

HC-05 module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH(Adaptive Frequency Hopping Feature). It has the footprint as small as 12.7mmx27mm. Hope it will simplify your overall design/development cycle #Module #Bluetooth #SPP

IGBT 460 V 20 A 107 W Surface Mount LPDS #CommonPartsLibrary #Transistor #IGBT The RGPR20NS43HRTL specification defines the engineering requirements for an ultrafast recovery power rectifier designed for high-efficiency power conversion and switching applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure reliable rectification performance, low switching losses, and long-term operational stability in power electronic systems. The device is intended for use in switch-mode power supplies, power factor correction circuits, motor drives, industrial power equipment, and other high-frequency power conversion applications. It provides efficient current rectification with fast reverse recovery characteristics, enabling improved system efficiency and reduced electromagnetic interference in demanding electrical environments. Engineering Requirements The rectifier shall be manufactured using qualified semiconductor fabrication processes and high-quality materials to ensure consistent electrical performance, thermal stability, and long service life. The device shall maintain reliable operation under specified voltage, current, and temperature conditions without degradation of functional performance. Electrical characteristics shall provide low forward voltage drop, fast reverse recovery time, and high surge current capability to support efficient high-frequency switching applications. The device shall maintain stable electrical behavior under repetitive switching cycles and transient operating conditions. Thermal performance shall support effective heat dissipation through the package structure and recommended mounting configuration. The component shall operate within specified junction temperature limits while maintaining electrical integrity and long-term reliability under continuous or intermittent load conditions. Mechanical construction shall be suitable for standard surface-mount or through-hole assembly, depending on the package configuration, and shall withstand soldering, handling, vibration, and thermal cycling without mechanical degradation. Workmanship shall be free from defects including contamination, cracks, bond failures, corrosion, or structural inconsistencies that could adversely affect electrical or mechanical performance. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process. Documentation Supporting documentation shall include engineering drawings, electrical performance data, thermal characterization reports, qualification records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before implementation to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #PowerRectifier #UltrafastRecoveryDiode #PowerElectronics #SwitchModePowerSupply #IndustrialElectronics #Semiconductor #ThermalManagement #QualityAssurance #EngineeringDocumentation

Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 8-SOIC The MCP6042-I/SN specification defines the engineering requirements for a low-power dual operational amplifier designed for precision analog signal conditioning applications. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure stable and accurate analog performance across a wide range of embedded, industrial, and consumer electronic systems. The device is intended for use in applications requiring low offset voltage, low input bias current, and stable operation under low supply conditions. It is suitable for signal buffering, sensor signal conditioning, filtering, and general-purpose analog amplification in battery-powered and low-energy electronic systems. Engineering Requirements The operational amplifier shall be manufactured using advanced CMOS process technology to ensure low power consumption, high input impedance, and stable analog performance. The device shall maintain consistent operation under defined electrical, thermal, and environmental conditions without degradation of signal integrity. The amplifier architecture shall support dual independent channels with stable gain characteristics and predictable linear response across the intended operating range. Output performance shall remain stable under capacitive loading and dynamic signal conditions typical of embedded analog systems. Electrical characteristics shall ensure low noise operation, low offset behavior, and reliable signal amplification with minimal distortion. The device shall maintain functional stability during power-up, power-down, and transient operating conditions. Mechanical and package construction shall be suitable for surface-mount assembly and shall ensure robust handling during manufacturing, soldering, and system integration. Workmanship shall be free from defects such as contamination, cracks, bonding issues, or structural inconsistencies that could affect electrical or mechanical reliability. Inspection, validation, and testing shall be performed using controlled procedures and calibrated measurement systems to ensure compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established change control processes. Documentation Supporting documentation shall include official datasheets, electrical characterization reports, qualification data, inspection records, and revision-controlled manufacturing documentation. All records shall be maintained under formal configuration management and quality assurance systems to ensure traceability and consistency. Revision Control Any modification to this specification shall be managed through the formal engineering change control system. All revisions shall undergo technical review, validation, and approval prior to implementation to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #OperationalAmplifier #AnalogIC #MicrochipTechnology #LowPowerDesign #SignalConditioning #EmbeddedSystems #ElectronicsDesign #QualityAssurance #EngineeringDocumentation

Laminated Core 1.1VA Power Transformer 115V Primary Parallel 6.3V, Series 12.6V Secondary Parallel 180mA, Series 90mA Through Hole The F12-090-C2 specification defines the engineering requirements for an electronic connector component intended to provide reliable electrical interconnection between printed circuit boards, cable assemblies, or electronic subsystems. This specification establishes the functional, mechanical, electrical, environmental, and quality requirements necessary to ensure dependable signal transmission, secure mechanical engagement, and long-term operational reliability. The component is intended for use in embedded, industrial, communication, and electronic control systems where compact interconnect solutions and consistent electrical performance are required. The connector is designed to support repeated mating cycles while maintaining low contact resistance, stable mechanical retention, and compatibility with standard electronic assembly processes. Engineering Requirements The connector shall be manufactured using precision-formed conductive contacts and high-strength insulating materials to ensure consistent electrical conductivity, mechanical durability, and long service life. The construction shall support reliable mating and unmating operations without degradation of contact performance. Electrical characteristics shall provide low contact resistance, stable signal integrity, and reliable current-carrying capability within the specified operating conditions. The connector shall maintain electrical continuity under vibration, thermal cycling, and environmental exposure encountered during normal operation. Mechanical construction shall ensure accurate alignment of mating interfaces, secure retention, and resistance to mechanical wear resulting from repeated insertion and removal. The housing and contact system shall withstand normal handling and assembly processes without deformation or structural damage. Workmanship shall be free from defects including contamination, cracks, corrosion, plating irregularities, or mechanical deformation that could adversely affect electrical or mechanical performance. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with engineering requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process prior to implementation. Documentation Supporting documentation shall include engineering drawings, material specifications, electrical performance data, inspection records, qualification reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be processed through the formal engineering change management system. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable industry standards. #EngineeringSpecification #Connector #ElectronicInterconnect #SignalIntegrity #EmbeddedSystems #IndustrialElectronics #ElectricalEngineering #Manufacturing #QualityAssurance #EngineeringDocumentation

Optical Sensor Through-Beam 0.197" (5mm) PCB Mount The EE-SX4081 specification defines the engineering requirements for a slot-type photomicrosensor designed for non-contact object detection and position sensing in electronic and electromechanical systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure accurate optical sensing, reliable switching performance, and long-term operational stability. The component is intended for use in industrial automation, office equipment, consumer electronics, and embedded control systems requiring precise detection of object presence, motion, or position. The integrated infrared emitter and phototransistor receiver provide dependable sensing through interruption of the optical path, enabling high-speed, contactless detection in compact system designs. Engineering Requirements The photomicrosensor shall be manufactured using qualified optoelectronic components and controlled production processes to ensure consistent sensing performance, mechanical integrity, and long service life. The optical assembly shall maintain accurate alignment between the emitter and receiver to provide stable detection characteristics throughout the specified operating conditions. Electrical characteristics shall provide reliable switching response, stable output behavior, and low power consumption while maintaining consistent sensitivity across the intended operating voltage and temperature ranges. The sensor shall exhibit reliable performance under normal ambient light conditions and shall maintain signal integrity during continuous operation. Mechanical construction shall ensure precise slot dimensions, secure mounting capability, and resistance to vibration, mechanical shock, and thermal cycling encountered during normal operation. The package shall be suitable for printed circuit board assembly and shall withstand standard soldering and handling processes without degradation. Workmanship shall be free from defects including contamination, optical misalignment, package damage, corrosion, or structural irregularities that could affect sensing accuracy or reliability. Inspection, validation, and testing shall be performed using calibrated equipment and controlled quality procedures to verify compliance with engineering requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process before implementation. Documentation Supporting documentation shall include engineering drawings, electrical specifications, optical performance data, qualification reports, inspection records, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete traceability throughout the product lifecycle. Revision Control Any modification to this specification shall be processed through the formal engineering change management system. All revisions shall undergo technical review, validation, and approval before release to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #Photomicrosensor #OpticalSensor #SlotSensor #IndustrialAutomation #EmbeddedSystems #Optoelectronics #QualityAssurance #EngineeringDocumentation #ElectronicComponents

1 Ohms ±1% 2W Chip Resistor 2512 (6332 Metric) Current Sense Thick Film The CRM2512-FX-1R00ELF specification defines the engineering requirements for a surface-mount current sense resistor designed for precision current measurement and power management applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure accurate resistance performance, efficient power dissipation, and long-term operational reliability in electronic systems. The component is intended for use in power supplies, battery management systems, motor control circuits, industrial automation equipment, and embedded electronic applications requiring precise current monitoring. The resistor provides a low-resistance element for current sensing while maintaining high measurement accuracy, thermal stability, and compatibility with automated surface-mount manufacturing processes. Engineering Requirements The resistor shall be manufactured using high-quality resistive materials and controlled fabrication processes to ensure stable resistance characteristics, low temperature coefficient, and reliable long-term performance. The construction shall provide consistent electrical behavior throughout the specified operating conditions without significant drift or degradation. Electrical characteristics shall ensure accurate resistance value, stable current sensing performance, and low inductance suitable for high-frequency switching environments. The component shall maintain its specified tolerance and thermal performance under continuous rated power and transient load conditions. Thermal performance shall support efficient heat dissipation through the package structure and printed circuit board interface. The resistor shall withstand normal solder reflow processes and maintain structural integrity during thermal cycling, vibration, and mechanical handling. Mechanical construction shall be compatible with standard surface-mount assembly processes and shall provide reliable solder joint formation. Workmanship shall be free from defects including cracks, delamination, contamination, plating irregularities, or structural inconsistencies that could adversely affect electrical or mechanical performance. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process. Documentation Supporting documentation shall include engineering drawings, electrical performance specifications, thermal characterization data, qualification reports, inspection records, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before implementation to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #CurrentSenseResistor #PowerElectronics #SurfaceMount #PrecisionResistor #IndustrialElectronics #PowerManagement #QualityAssurance #EngineeringDocumentation #ElectronicComponents

Connector Header Surface Mount 12 position 0.049" (1.25mm) 53398-1271 The 0533981271 is a board-to-wire connector assembly component designed to provide a reliable electrical and mechanical interface between a printed circuit board and discrete wire harnesses. It belongs to a compact connector system intended for applications requiring secure mating, efficient signal transmission, and ease of assembly. The component is engineered to support consistent electrical contact performance while maintaining a small footprint suitable for space-constrained designs. Its construction ensures dependable connectivity under typical operating conditions encountered in consumer electronics, industrial equipment, and embedded systems. Functional Description This connector component serves as part of a modular interconnect system, enabling termination of wires and subsequent mating to a corresponding board-mounted header. It provides stable retention and alignment during mating and unmating operations, ensuring consistent electrical continuity. The design supports straightforward integration into automated or manual assembly processes, facilitating efficient production workflows. Contact geometry and housing features are optimized to maintain reliable engagement and minimize the risk of intermittent connections. Electrical Characteristics The component is designed to support low-voltage signal and power transmission in compact electronic systems. It provides low contact resistance to ensure efficient current flow and stable signal integrity. Insulation materials are selected to maintain dielectric performance and prevent leakage under normal operating conditions. The connector system is suitable for typical electronic applications where consistent and reliable electrical performance is required. Mechanical Characteristics The connector features a durable housing constructed from engineered thermoplastic material, providing mechanical strength and resistance to environmental stress. Contact elements are formed from conductive alloys and finished to enhance conductivity and corrosion resistance. The design includes features that promote secure mating retention and proper alignment, reducing wear and ensuring longevity over repeated use. Its compact form factor supports high-density layouts on printed circuit boards. Environmental Characteristics The component is designed to operate reliably within standard environmental conditions encountered in electronic equipment. Materials used in the housing and contacts are selected for thermal stability and resistance to common environmental factors such as humidity and mechanical vibration. The connector system maintains performance over typical temperature ranges associated with consumer and industrial applications. Applications This connector is intended for use in electronic systems requiring compact and reliable wire-to-board interconnection. Common applications include consumer devices, industrial control systems, embedded modules, and communication equipment where dependable signal or power connectivity is essential. Summary The 0533981271 from Molex is a compact and reliable connector solution for board-to-wire applications. It offers consistent electrical performance, robust mechanical design, and ease of integration, making it well suited for modern electronic assemblies requiring dependable interconnect solutions. #commonpartslibrary #connector #header

This project is a reference design for a VL53L1X-based sensor circuit. It incorporates the use of a Texas Instruments LP5907MFX-2.8/NOPB to regulate the supply voltage. #referenceDesign #VL53L1X #Module #template #LIDAR #sensor #distance #reusable #module #industrialsensing #stm #sublayout

Hot Swap Controller 1 Channel General Purpose 23-LQFN-CLIP (6x5) The TPS16851VMAR is an automotive-grade integrated electronic fuse device designed to provide advanced power path protection and monitoring for low-voltage DC power distribution systems. The device integrates multiple protection mechanisms including overvoltage protection, undervoltage protection, overcurrent protection, reverse current blocking, and inrush current control within a compact package optimized for space-constrained applications. It is intended for use in automotive, industrial, and embedded electronic systems requiring robust hot-swap capability, fault isolation, and controlled power sequencing. The device incorporates precision current sensing and programmable fault management functions that enable reliable protection of downstream circuitry against abnormal operating conditions. Adjustable protection thresholds and timing parameters allow flexible system-level configuration while maintaining fast fault response and high reliability. Integrated MOSFET control minimizes external component count and simplifies PCB implementation. The TPS16851VMAR supports wide input operating ranges suitable for automotive battery-powered environments and transient-prone supply rails. The device is qualified for harsh operating conditions and includes thermal shutdown and fault reporting features to improve system safety and diagnostics. Engineering Specification Device Type Automotive electronic fuse with integrated protection and power management functionality Manufacturer Texas Instruments Package Type VQFN-HR surface-mount package Mounting Type Surface mount Application Category Automotive power distribution and protection Protection Features Overvoltage protection Undervoltage protection Overcurrent protection Short-circuit protection Reverse current blocking Thermal shutdown Inrush current limiting Control Features Programmable fault thresholds Adjustable current limit Programmable timing and retry behavior Enable and shutdown control Fault indication and monitoring Power Management Features Integrated MOSFET control Hot-swap capability Controlled startup sequencing Load disconnect functionality Interface Characteristics Analog control interface Diagnostic fault reporting Current sense monitoring Operating Environment Automotive-qualified operating conditions High transient immunity Designed for harsh electrical environments PCB Integration Compact footprint Thermally enhanced package Low external component requirement Typical Applications Automotive electronic control units Infotainment systems ADAS power distribution Industrial control systems Embedded power management Protected DC supply rails #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

4.7 µH Unshielded Drum Core, Wirewound Inductor 62 A 0.95mOhm Max Vertical, 2 PC Pin The IHDM1008BCEV4R7M30 is a surface-mount power inductor designed for energy storage and filtering in switching power supplies and DC-DC converter circuits. It provides stable inductance characteristics under varying current conditions, making it suitable for applications requiring efficient power conversion and noise suppression. The device is constructed using a magnetically shielded structure to minimize electromagnetic interference and ensure reliable operation in densely populated circuit environments. Its design supports high current handling capability while maintaining low core losses, contributing to overall system efficiency. Functional Overview The inductor stores energy in its magnetic field when current flows through it and releases that energy when the current changes. This behavior is essential for smoothing current in switching regulators and maintaining stable voltage levels in power circuits. Its low resistance winding helps reduce power loss, while the magnetic shielding limits flux leakage, improving performance in sensitive electronic systems. The component is optimized for high-frequency operation typically found in modern power management designs. Electrical Characteristics The device provides a fixed inductance value with stable performance across a range of operating currents. It supports relatively high saturation current levels, allowing it to function effectively in power circuits without significant degradation of inductance. Low direct current resistance contributes to improved efficiency and reduced heat generation. The inductor is designed to maintain consistent electrical behavior across typical operating temperatures and frequencies used in switching applications. Interface Requirements The component features standard surface-mount terminals for direct placement onto printed circuit boards. Proper soldering and pad design are required to ensure mechanical stability and optimal electrical performance. Placement considerations should include minimizing loop area and proximity to switching elements to reduce noise and maximize efficiency. Operating Conditions The inductor is intended for operation across a wide temperature range suitable for consumer and industrial electronics. It is capable of maintaining performance under continuous load conditions and varying thermal environments. Adequate thermal management and airflow may be necessary in high-current applications to prevent excessive temperature rise. Protection and Reliability Features The device is constructed with durable materials to ensure long-term reliability under electrical and thermal stress. Its magnetically shielded design reduces susceptibility to external interference and limits emissions that could affect nearby components. It is designed to withstand standard handling and soldering processes associated with surface-mount assembly. Packaging and Integration The IHDM1008BCEV4R7M30 is provided in a compact surface-mount package optimized for automated assembly processes. Its form factor allows efficient use of board space while supporting high-performance power designs. The package design ensures secure mounting and consistent electrical contact in high-density circuit layouts. Applications Typical applications include DC-DC converters, voltage regulator modules, power management circuits, filtering stages, and energy storage elements in portable devices, industrial equipment, and communication systems. #commonpartslibrary #inductors

8 Position Card Connector Micro SIM Surface Mount, Right Angle Gold ## Engineering Specification ## General Description The **693022010811** is a Würth Elektronik **WR-CRD Micro SIM card connector** designed for compact electronic devices requiring secure SIM card retention and reliable board-level electrical connection. It is intended for surface-mount printed circuit board assembly and is suitable for communication modules, wireless devices, embedded systems, IoT hardware, and networking equipment. The connector uses a hinged lid mechanism to hold the Micro SIM card in place during operation. ## Device Identification Manufacturer Part Number: **693022010811** Manufacturer: **Würth Elektronik** Product Series: **WR-CRD** Device Category: **Connector and Interconnect Component** Device Type: **Micro SIM Card Connector** Connector Style: **Hinge Type** Mounting Type: **Surface Mount, Right Angle** ## Functional Description The device functions as a board-mounted Micro SIM card interface. It provides mechanical retention and electrical contact between the SIM card and the host printed circuit board. The hinged lid design allows the SIM card to be placed into the connector and secured during operation, helping maintain contact stability in compact electronic assemblies. ## Mechanical Description The connector is designed with a low-profile surface-mount construction suitable for space-constrained PCB layouts. It uses a hinged card-retention mechanism and is intended for horizontal or right-angle card installation. The mechanical structure supports reliable insertion, retention, and removal of the Micro SIM card during normal use. ## Electrical Description The connector is intended for signal-level SIM card interface applications. It provides multiple gold-plated contact positions for stable electrical connection between the SIM card and the host circuit. The device should be used within the manufacturer’s specified voltage, current, contact resistance, and insulation limits. ## Material and Contact Description The connector uses copper alloy contacts with gold plating for reliable signal transfer and corrosion resistance. The housing and mechanical retention structure are designed for surface-mount assembly and repeated card handling within the rated operating conditions. ## Mounting and Assembly Description The component is suitable for automated surface-mount PCB assembly. Proper land pattern design, soldering profile control, and mechanical clearance should be followed according to the manufacturer’s recommended layout and assembly guidance. The PCB design should provide stable grounding, correct pad alignment, and adequate clearance for SIM card insertion and lid operation. ## Application Suitability The **693022010811** is suitable for cellular communication devices, IoT modules, wireless routers, embedded modems, tracking systems, smart meters, industrial communication equipment, portable electronics, and other products requiring a Micro SIM card interface. ## Design Considerations The connector should be placed in an accessible area of the PCB to allow SIM card installation and removal. Designers should avoid excessive mechanical stress on the hinged lid, improper solder joint loading, contamination of the contact area, and operation beyond the specified environmental and electrical ratings. ## Hashtags #commonpartslibrary #connector #simconnector #microsimconnector #wurthelektronik #wrcrd #cardconnector #memoryconnector #interconnect #pcbconnector #surfacemount #rightangleconnector #smtcomponent #goldplatedcontacts #embeddedhardware #iotdevices #wirelessmodules #communicationdevices #networkingequipment #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #componentlibrary #engineeringparts #electronicsengineering

7.2 µH Shielded Drum Core, Wirewound Inductor 7.9 A 12.8mOhm Max Nonstandard # 7447798720 ## General Description The 7447798720 is a high-performance power inductor manufactured by Würth Elektronik as part of the WE-MAPI series. It is designed for energy storage, filtering, and power conversion applications in modern switching power supplies and DC-DC converter circuits. The component features a magnetically shielded construction that minimizes electromagnetic interference while maintaining excellent current handling capability and low power losses. Its compact surface-mount design and robust mechanical structure make it suitable for industrial automation equipment, telecommunications systems, embedded electronics, automotive-support applications, consumer devices, and high-efficiency power management systems. The inductor is optimized for use in applications requiring stable inductance, low DC resistance, and reliable performance under varying load conditions. ## Key Features ### Magnetic Characteristics * Magnetically shielded construction * Stable inductance performance * High-current handling capability * Low magnetic flux leakage * Optimized energy storage capability * Suitable for high-frequency switching applications ### Electrical Characteristics * Low DC resistance * High efficiency operation * Low core losses * Stable electrical performance * Excellent current saturation behavior * Reliable operation in power conversion circuits ### Mechanical Characteristics * Surface-mount package * Compact footprint * Robust mechanical construction * Automated assembly compatible * High-density PCB design support ### Material Construction * Metal alloy core technology * Shielded magnetic structure * High-temperature materials * RoHS-compliant construction * Lead-free compatible design ### Thermal Characteristics * Efficient heat dissipation * Stable operation under continuous load * Suitable for demanding power applications * Reliable performance across industrial operating conditions ### Environmental Characteristics * Industrial-grade reliability * Long operational service life * Resistance to mechanical stress * Suitable for harsh electronic operating environments ### Application Areas * DC-DC Converters * Switching Power Supplies * Point-of-Load Regulators * Industrial Automation Equipment * Telecommunications Systems * Embedded Electronics * Power Distribution Modules * Consumer Electronics * Energy Management Systems * Battery-Powered Devices * Motor Control Systems * Power Filtering Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Power Inductor Solution ## Manufacturer Würth Elektronik ## Product Family WE-MAPI Molded Power Inductor Series #7447798720 #WurthElektronik #WEMAPI #PowerInductor #ShieldedInductor #SMDInductor #PowerElectronics #DCDCConverter #SwitchingPowerSupply #EmbeddedSystems #IndustrialElectronics #PowerManagement #PCBDesign #ElectronicsEngineering #EnergyStorage

Isolated Module DC DC Converter 2 Output 15V -15V 170mA, 170mA 4.5V - 9V Input The REC5-0515DRW/H6/C/SMD-R specification defines the engineering requirements for an isolated DC-DC converter module designed for regulated power conversion in compact electronic systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure stable voltage conversion, reliable isolation, and long-term operational performance. The device is intended for use in embedded systems, industrial control equipment, communication modules, and distributed power architectures where isolated power rails are required. It provides regulated output power from a DC input source while maintaining galvanic isolation between input and output stages to enhance system safety and signal integrity. Engineering Requirements The power module shall be manufactured using controlled electronic assembly processes and high-reliability components to ensure stable conversion efficiency and consistent output regulation. The internal architecture shall support isolated power transfer with stable performance under defined load and environmental conditions. Electrical characteristics shall ensure stable output regulation, low output ripple, and reliable transient response during load variation. The device shall maintain consistent performance across its intended operating temperature range and input voltage variation conditions. Isolation performance shall ensure electrical separation between input and output circuits to protect downstream electronics and maintain system safety requirements. The module shall withstand electrical stress conditions defined by applicable safety and reliability standards. Thermal performance shall support continuous operation without degradation of output regulation or reliability under rated operating conditions. The device shall be suitable for PCB mounting and shall maintain structural integrity during soldering and long-term operation. Workmanship shall be free from defects such as contamination, cracks, soldering defects, or structural irregularities that could affect electrical performance or mechanical reliability. Manufacturing and inspection shall be performed using controlled processes and calibrated equipment. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures. Documentation Supporting documentation shall include datasheets, electrical performance reports, isolation certification data, qualification test records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through the formal engineering change control system. Each revision shall undergo technical validation and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #DCDCConverter #PowerModule #IsolatedPower #PowerElectronics #EmbeddedSystems #IndustrialElectronics #PowerSupply #QualityAssurance #EngineeringDocumentation

10 µH Shielded Molded Inductor 15.5 A 14.75mOhm Max Nonstandard The XAL1010-103MED specification defines the engineering requirements for a shielded power inductor designed for high-efficiency energy storage and power conversion applications. This specification establishes the functional, electrical, mechanical, thermal, environmental, and quality requirements necessary to ensure stable inductance characteristics, efficient current handling, and long-term operational reliability in power electronic systems. The component is intended for use in DC-DC converters, voltage regulators, power management circuits, industrial control equipment, automotive electronics, and embedded systems requiring compact, high-current inductive components. The magnetically shielded construction minimizes electromagnetic interference while supporting efficient energy transfer and stable performance in high-frequency switching applications. Engineering Requirements The power inductor shall be manufactured using high-quality magnetic core materials and precision-wound conductors to ensure consistent inductance, low core losses, and reliable current-carrying capability. The construction shall maintain stable electrical performance under specified operating voltage, current, frequency, and temperature conditions. Electrical characteristics shall provide accurate inductance values, low direct current resistance, high saturation current capability, and low electromagnetic emissions. The component shall maintain stable performance during continuous operation, transient loading, and thermal cycling without significant degradation of inductance or efficiency. Thermal performance shall support effective heat dissipation and continuous operation within the specified temperature range while maintaining structural integrity and electrical characteristics. The shielded construction shall minimize magnetic field leakage and improve electromagnetic compatibility within densely populated electronic assemblies. Mechanical construction shall be suitable for surface-mount assembly and compatible with automated manufacturing processes. The component shall withstand solder reflow, vibration, mechanical shock, and handling without deformation or degradation of electrical performance. Workmanship shall be free from defects including cracks, contamination, core damage, winding irregularities, or structural inconsistencies. Inspection, validation, and testing shall be conducted using calibrated equipment and controlled quality procedures to verify compliance with all applicable engineering and manufacturing requirements. Any deviation from this specification shall require formal engineering evaluation, documented technical justification, and approval through the established engineering change control process. Documentation Supporting documentation shall include engineering drawings, electrical specifications, magnetic characterization data, thermal performance reports, qualification records, inspection reports, material declarations, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure complete product traceability. Revision Control Any modification to this specification shall be managed through the formal engineering change management process. All revisions shall undergo technical review, validation, and approval before implementation to ensure continued compliance with design intent and applicable engineering standards. #EngineeringSpecification #PowerInductor #ShieldedInductor #PowerElectronics #DCDCConverter #PowerManagement #Magnetics #IndustrialElectronics #QualityAssurance #EngineeringDocumentation #CommonPartsLibrary #Inductor #XAL1010

The BT151-600R specification defines the engineering requirements for a high-power silicon controlled rectifier designed for phase control and switching applications in electronic power systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure reliable switching performance, controlled power regulation, and long-term operational stability. The device is intended for use in applications requiring efficient control of AC power or high-current DC switching, such as motor speed control, light dimming, power regulation circuits, and industrial control systems. It provides controlled conduction behavior triggered by gate activation and remains in conduction until current falls below the holding condition. Engineering Requirements The semiconductor device shall be manufactured using controlled silicon processing techniques to ensure stable thyristor operation, consistent triggering characteristics, and reliable current handling capability. The device shall maintain predictable switching behavior under defined electrical, thermal, and environmental operating conditions. Electrical characteristics shall ensure reliable gate triggering sensitivity, stable on-state conduction, and controlled turn-off behavior under appropriate circuit conditions. The device shall maintain performance integrity under surge conditions and repetitive switching operation within its design limits. Thermal performance shall support efficient heat dissipation through the package structure and mounting interface. The device shall be suitable for attachment to appropriate heat sinking systems to maintain safe operating junction conditions during continuous or high-load operation. Mechanical and package construction shall be suitable for surface-mount or power PCB assembly and shall ensure robust mechanical stability during soldering, handling, and thermal cycling. Workmanship shall be free from defects such as contamination, cracks, bond wire issues, or structural inconsistencies that could impact performance or reliability. Inspection, validation, and testing shall be performed using controlled procedures and calibrated equipment to ensure compliance with all applicable engineering and quality requirements. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established change control processes. Documentation Supporting documentation shall include official datasheets, electrical characterization reports, thermal performance data, qualification test records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems to ensure traceability and consistency. Revision Control Any modification to this specification shall be managed through formal engineering change control procedures. All revisions shall undergo technical review, validation, and approval prior to implementation to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #SCR #Thyristor #PowerElectronics #PhaseControl #IndustrialControl #Semiconductor #PowerSwitching #QualityAssurance #EngineeringDocumentation

The PICAXE-08M2 is a popular, low-cost 8-pin microcontroller chip known for its ease of use in education and hobbyist projects, offering enhanced features like parallel tasks, touch sensing, I2C, and configurable I/O pins for a small package, serving as a powerful upgrade to older PICAXE 08M chips. It supports up to 6 inputs/outputs, features a BASIC programming environment, and is ideal for getting started with embedded systems due to its simplicity and affordability. #CommonPartsLibrary #Microcontroller #PICAXE