Remote Receiver Sensor 38.4kHz 35m Through Hole #commonpartslibrary #interface #optical #sensor

General ISM < 1GHz LoRa™, LoRaWAN Transceiver Module 863MHz ~ 870MHz, 902MHz ~ 928MHz Antenna Not Included Surface Mount 453-00139R is a compact LoRaWAN® and LoRa® RF transceiver module from Ezurio (formerly Laird Connectivity), designed for long-range, low-power wireless communication in Industrial IoT, smart agriculture, asset tracking, smart cities, and remote monitoring applications. Based on Semtech's SX1262 LoRa transceiver, the module provides excellent RF sensitivity and robust wireless performance while simplifying integration through multiple peripheral interfaces and a surface-mount package. Key Features LoRa® and LoRaWAN® wireless communication support Frequency bands: 863–870 MHz and 902–928 MHz Up to 22 dBm transmit power High receiver sensitivity down to -139.2 dBm Data rates up to 1 Mbps Wide supply voltage range: 2.0 V to 3.7 V Multiple interfaces: UART, SPI, I²C, I²S, ADC, GPIO, PWM, and IrDA Low receive current consumption (typically 7.6–8.1 mA) Operating temperature range: -40°C to +85°C Compact 47-pad surface-mount module Suitable for battery-powered and long-range IoT applications Hashtags #LoRa #LoRaWAN #Ezurio #LairdConnectivity #SX1262 #RFModule #WirelessCommunication #IndustrialIoT #SmartAgriculture #AssetTracking #RemoteMonitoring #SubGHz #IoTModule #EmbeddedSystems #LongRangeWireless

Remote Receiver Sensor 33.0kHz 45m Through Hole #commonpartslibrary #interface #optical #sensor

Remote Receiver Sensor 30.0kHz 45m Through Hole #commonpartslibrary #interface #optical #sensor

Hot Swap Controller 1 Channel General Purpose 32-LQFN (5x5) The NCP81428MNTXG is a high-performance multi-phase synchronous buck controller designed for CPU, GPU, FPGA, ASIC, and high-current core power applications requiring accurate voltage regulation, fast transient response, and high efficiency. The device supports multi-phase operation with integrated gate drivers and advanced control architecture optimized for modern low-voltage, high-current power rails. It is intended for applications requiring dynamic voltage scaling, precise load-line regulation, and reliable system power management in computing, networking, telecommunications, and industrial platforms. The controller operates with external MOSFET stages and supports flexible power stage configuration for optimized thermal and efficiency performance. It incorporates differential voltage sensing, programmable protection features, current balancing between phases, and high-speed transient compensation to maintain stable operation under rapidly changing load conditions. Engineering Specification Manufacturer onsemi Manufacturer Part Number NCP81428MNTXG Device Type Multi-Phase Synchronous Buck Controller with Integrated Gate Drivers Control Topology Voltage Mode Multi-Phase PWM Control Phase Configuration Dual-Phase Controller Architecture Application Focus CPU Core Power GPU Core Regulation FPGA Power Rails ASIC Core Supplies High-Current DC-DC Regulation Input Supply Range Supports Low-Voltage Bias Supply Operation for Digital Power Systems Output Voltage Regulation Programmable Low-Voltage Output Regulation with Differential Remote Sense Capability Switching Frequency Programmable PWM Switching Frequency with Multi-Phase Interleaving Gate Driver Integration Integrated High-Side and Low-Side MOSFET Gate Drivers Current Sensing Supports Inductor DCR Sensing and Sense Resistor Current Monitoring Load-Line Support Programmable Load-Line Regulation and Droop Compensation Voltage Positioning Adaptive Voltage Positioning for Improved Transient Performance Protection Features Overcurrent Protection Overvoltage Protection Undervoltage Protection Thermal Protection Short-Circuit Protection Power-Good Monitoring Power Management Features Soft-Start Control Enable Functionality Phase Balancing Fault Monitoring Sequencing Support Compensation External Compensation Network Support for Loop Stability Optimization Efficiency Features Synchronous Rectification Support Multi-Phase Interleaving for Reduced Ripple Current Optimized Gate Drive Timing Package Type QFN Surface-Mount Package Mounting Type Surface Mount Technology Temperature Range Industrial Operating Temperature Range Target Applications Server Motherboards High-Performance Embedded Computing Networking Equipment Telecommunications Infrastructure Industrial Processing Systems Graphics and Accelerator Platforms #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

Remote Receiver Sensor 36.0kHz 45m Through Hole #commonpartslibrary #interface #optical #sensor

STM32WLE5JC is an ultra-low-power wireless microcontroller from STMicroelectronics that combines an Arm Cortex-M4 processor with an integrated Sub-GHz radio transceiver in a single chip. Designed for long-range, low-power IoT and LPWAN applications, it supports LoRa®, (G)FSK, (G)MSK, and BPSK modulation schemes, making it ideal for smart metering, industrial monitoring, agriculture, asset tracking, and remote sensing applications. The device offers a high level of integration, robust security features, and extensive peripheral support while maintaining very low power consumption. Key Features Arm Cortex-M4 32-bit MCU running at up to 48 MHz Integrated Sub-GHz radio transceiver (150 MHz to 960 MHz) Supports LoRa®, LoRaWAN®, (G)FSK, (G)MSK, and BPSK modulations Up to 256 KB Flash memory and 64 KB SRAM Ultra-low-power operation with multiple low-power modes Programmable RF output power up to +22 dBm High receiver sensitivity down to -148 dBm (LoRa mode) Hardware AES-256 encryption and True Random Number Generator (RNG) Public Key Accelerator (PKA) for enhanced security 12-bit ADC, 12-bit DAC, comparators, and DMA controllers Multiple communication interfaces: USART, LPUART, SPI, I²C Operating voltage range: 1.8 V to 3.6 V Operating temperature range: -40°C to +105°C Available in compact UFQFPN, UFBGA, and WLCSP packages #STM32WLE5JC #STM32WL #LoRa #LoRaWAN #SubGHz #WirelessMCU #CortexM4 #LPWAN #IoT #SmartMetering #IndustrialIoT #EmbeddedSystems #STMicroelectronics

Radiation-hardness-assured (RHA), high-accuracy remote and local temperature sensor • Radiation-hardened component • Space or Aerospace grade #commonpartslibrary #integratedcircuit #temperature #sensor

Isolated Module DC DC Converter 1 Output 12V 8.33A 100V - 200V Input The VE-J51-CW is an isolated DC-DC converter module from Vicor’s VE-J00 series, designed to convert a high DC input voltage into a regulated lower DC output for electronic systems. It is commonly used in industrial equipment, telecommunications, and embedded power systems where stable, isolated power conversion is required. Key Features Isolated DC-DC Converter Module Provides galvanic isolation between input and output for safety and noise reduction Input Voltage Range 100V to 200V DC input (nominal ~150V) Output Voltage 12V DC regulated output Power Rating Up to 100W output power High Efficiency Around ~90% efficiency depending on load conditions Isolation Voltage Up to 3kV isolation for high-voltage separation Form Factor Half-brick package Compact size: approx. 57.9 × 61 × 12.7 mm Output Capability Up to 8.33A output current (at 12V) Protection & Control Features Overcurrent protection (OCP) Short-circuit protection (SCP) Remote sense Logic disable / control functions Wide Operating Temperature Range Typically -25°C to +100°C Industrial Certifications UL, CSA, TUV compliant (varies by variant) Typical Applications Industrial automation systems Telecom and networking equipment Distributed power architectures High-voltage input DC power conversion systems Embedded power supplies in control systems #CommonPartsLibrary #Power-supply #VE-J00™ (100W)

Remote Receiver Sensor 36.0kHz 40m Through Hole #commonpartslibrary #interface #optical #sensor

Remote Receiver Sensor 36.0kHz 45m Through Hole #commonpartslibrary #interface #optical #sensor

Remote Receiver Sensor 33.0kHz 45m Through Hole #commonpartslibrary #interface #optical #sensor

8km UART Through Hole RF Transceiver Modules and Modems RoHS,3.3V~5.2V,-40 ~ 80C The E32-433T30D is based on the Semtech SX1278 LoRa chipset and uses LoRa spread-spectrum modulation to achieve long-distance, highly reliable wireless communication even in noisy environments. It communicates with a microcontroller via UART (serial interface), making it easy to integrate with Arduino, ESP32, STM32, and similar systems. It is commonly used for IoT telemetry, remote control systems, sensor networks, and industrial monitoring, especially where GSM/Wi-Fi is unavailable or impractical. Key Features Frequency range: 410–441 MHz (433 MHz default) RF output power: 21–30 dBm (up to 1 W high-power version) LoRa modulation: High sensitivity and strong anti-interference Communication distance: up to ~8 km (open area, ideal conditions) Interface: UART TTL serial (3.3 V logic level) Sensitivity: around -147 dBm for long-range reception Low data rate support: ~0.3 kbps to 19.2 kbps Half-duplex communication (TX/RX not simultaneous) Configurable modes: normal / wake-up / power-saving / sleep via M0 & M1 pins Compact module size with SMA antenna connector Wide operating temperature: -40 °C to +85 °C Important Notes Requires external microcontroller (MCU) for operation (not standalone). Must not leave M0 and M1 pins floating (must be defined HIGH/LOW or GND). Works best with proper 433 MHz antenna (2–5 dBi recommended). Power supply must be stable (typically 5V with sufficient current capability). For maximum range, line-of-sight + correct antenna height matters more than raw power. Applications Smart agriculture monitoring Remote sensor networks Utility meter reading (water/gas) Industrial telemetry systems Drone/robot communication links Remote control & automation systems #E32_433T30D #Ebyte #LoRa #SX1278 #WirelessModule #IoT #Telemetry #LongRangeCommunication #UART #433MHzLoRa #EmbeddedSystems

Remote Control Encoder, SMD SOP-20 #CommonPartsLibrary #IntegratedCircuits

Photo Modules for PCM Remote Control Systems opto IR receiver Vishay*CAST*

Isolated DC-DC Converter Module – Single-output isolated DC-DC converter providing a regulated 5 V output at up to 4 A (20 W) from a 9 V to 36 V DC input. Features 1.6 kVDC input-to-output isolation, up to 88% efficiency, remote ON/OFF control, output voltage trimming (±10%), and integrated overcurrent protection (OCP), overvoltage protection (OVP), and short-circuit protection (SCP). Operates over a −40°C to +63°C temperature range at full load and is housed in a 6-DIP through-hole module (2" × 1"). #RECOM #RP202405SFW #DCDCConverter #IsolatedConverter #PowerModule #20W #5VOutput #9To36VInput #1_6kVIsolation #ThroughHole #PowerManagement #EmbeddedSystems

IR Receiver Modules for Remote Control Systems opto IR receiver Vishay*MINIMOLD*

IR Receiver Modules for Remote Control Systems opto IR receiver Vishay*MOLD*

Remote and Local Temperature Sensor, SSOP-16 I2C SMBus Serial *SOP*3.9x4.9mm*P0.635mm*

Texas Instruments High-Accuracy Remote and Local Temperature Sensor with Pin-Programmable Bus Address, WQFN-10 Temperature sensor remote I2C TI Texas*RUN0010A*

XP Power 6W, 1000 VDC Isolated DC/DC Converter Module, Remote Control, Fully Regulated Dual Output Voltage ±5V, ±600mA, 5V Input Voltage, SIP XP_POWER DC/DC isolated Converter module *XP?POWER?ITxxxxx*

XP Power 6W, 1000 VDC Isolated DC/DC Converter Module, Remote Control, Fully Regulated Single Output Voltage 3.3V, ±1300mA, 5V Input Voltage, SIP XP_POWER DC/DC isolated Converter module *XP?POWER?ITxxxxx*