0.8-pF 3.3-V ±30-kV ESD protection diode with 6.8-V 16-A TLP clamping in 0402 package for USB 2.0

Power Switch/Driver 1:1 N-Channel 1.35A 28-WQFN (4x5) The TPS274160 device is a smart high-side switch with four integrated 160-mΩ NMOS power FETs and a chargepump to drive the gates. The device offers robust protection and diagnostic features to drive various loads (inductive, capacitive, and resistive) such as low wattage bulbs, LEDs, relays, solenoids, heaters, and sub-modules. The part enables flexible, multi-channel output configurations through paralleling channels and is in a very small WQFN package to enable usage in space constrained applications. The device is protected against short circuit events and over-temperature events, safely shutting off the output during fault events. The device also implements an external adjustable current limiting feature. This feature improves the reliability of the system by reducing inrush current when driving large capacitive loads and minimizing overload current thereby eliminating system supply brown out condition. The device also integrates diagnostic features like output current monitoring (version B) and open load detection to enable improved intelligence in modules and to enable predictive maintenance functionality. • Quad-channel 160-mΩ smart high-side switch • Wide DC operating voltage range: 5 V to 36 V – 50-V absolute maximum voltage • Accurate adjustable current limiting (250 mA to 4 A) • Intelligent diagnostic features – TPS274160A: Open-drain fault output – TPS274160B: Analog current sense – Open-load or short to supply detection in the off-state • Robust protection features – Short-circuit protection – Inductive load flyback clamp – Undervoltage lockout (UVLO) protection – Loss of GND protection • Excellent ESD protection on VS and OUT pins – ±8/±15 kV IEC 61000-4-2 ESD contact/air discharge • Available in small and 28-pin leadless QFN packages • Functional Safety-Capable – Documentation available to aid functional safety system design 2 Applications • Digital output modules • Standalone remote I/O • Motor drives • Solenoid or valve drive #TexasInstruments #TPS274160BRLHR #HighSideSwitch #SmartSwitch #IndustrialAutomation #PowerManagement #LoadDriver #CurrentLimiting #ProtectionIC #IndustrialControl #RemoteIO #SolenoidDriver #MotorDrive #EmbeddedSystems #ElectronicsDesign

ARM® Cortex®-M33F, ARM® Cortex®-M7F RT1180 Microcontroller IC 32-Bit Dual-Core 240MHz, 800MHz 160KB (160K x 8) ROM 289-LFBGA (14x14) The MIMXRT1189XVM8C is a high-performance crossover microcontroller from the NXP Semiconductors i.MX RT1180 family, designed for advanced industrial and real-time embedded applications. It combines the real-time performance of a microcontroller with the connectivity and security features typically found in application processors. The device integrates dual Arm® Cortex® cores, high-speed networking with Time-Sensitive Networking (TSN), and advanced EdgeLock® security technology, making it ideal for industrial automation, robotics, motor control, automotive gateways, and Industry 4.0 systems. Key Features Dual-core architecture: Arm® Cortex®-M7 core running up to 800 MHz Arm® Cortex®-M33 core running up to 300 MHz Integrated Gigabit TSN Ethernet switch for deterministic real-time networking Supports industrial Ethernet protocols including: EtherCAT PROFINET Ethernet/IP CC-Link IE Advanced EdgeLock® Secure Enclave for secure boot, cryptography, and tamper detection Up to 1.5 MB on-chip SRAM with ECC protection High-speed external memory interfaces Multiple communication peripherals: CAN-FD UART SPI I2C USB Ethernet High-resolution ADCs and advanced PWM/timer modules Supports MCUXpresso SDK and Zephyr RTOS Industrial temperature range operation from -40°C to +125°C BGA package optimized for compact industrial designs #Commonpartlibrary #Microcontroller #MIMXRT1189

2A 250V Fuse Board Mount (Cartridge Style Excluded) Through Hole Radial, Box 39212000440 is a 2 A, 250 VAC TE5 time-lag (slow-blow) radial through-hole fuse from Littelfuse. It is designed to provide reliable overcurrent protection for electronic circuits by tolerating temporary inrush currents while disconnecting the circuit during sustained overloads or short circuits. Its compact TE5 package, low internal resistance, and international safety approvals make it suitable for power supplies, battery chargers, industrial controllers, and consumer electronic equipment. Key Features Rated current: 2 A Rated voltage: 250 VAC Time-lag (Slow-Blow) characteristic for handling inrush currents TE5 radial through-hole package for PCB mounting Low internal resistance for efficient operation Shock-resistant and vibration-resistant construction Halogen-free, lead-free, and RoHS compliant Certified to IEC 60127-3 and approved by multiple international safety agencies Ideal for power supplies, battery chargers, industrial control systems, and consumer electronics #Littelfuse #Fuse #SlowBlowFuse #TimeLagFuse #TE5Fuse #CircuitProtection #OvercurrentProtection #ThroughHole #PowerSupply #IndustrialElectronics #ConsumerElectronics #BatteryCharger

ARM® Cortex®-M7 S32K3 Microcontroller IC 32-Bit 160MHz 4MB (4M x 8) FLASH 172-QFP (16x16) S32K344EHT1VPBST is an automotive-grade 32-bit microcontroller from NXP Semiconductors based on the Arm Cortex-M7 core architecture. The device is designed for high-performance real-time automotive body, chassis, powertrain, and domain control applications requiring functional safety, security, and advanced communication interfaces. It integrates high-speed processing capability, extensive peripheral integration, hardware security acceleration, and deterministic control functions suitable for safety-critical embedded systems. The microcontroller operates with an Arm Cortex-M7 CPU core running at high frequency with floating-point support and DSP extensions for computationally intensive applications. Integrated flash memory and SRAM provide embedded program and data storage optimized for automotive embedded control systems. The device supports hardware-assisted security features including secure boot, cryptographic acceleration, and tamper protection for secure automotive network communication and firmware integrity. The S32K344EHT1VPBST includes multiple communication peripherals supporting CAN FD, FlexCAN, LIN, SPI, UART, I2C, and Ethernet interfaces for distributed automotive networking and gateway applications. Advanced analog integration includes ADC modules, timers, PWM generators, watchdogs, and motor-control-oriented peripherals enabling precision sensing and control functionality. The device supports functional safety development aligned with ISO 26262 requirements and includes error correction, memory protection, fault monitoring, and safety management features. Power management functionality supports low-power operating modes for energy-efficient automotive electronic control units. The microcontroller is housed in a thermally enhanced LQFP package suitable for automotive operating environments with extended temperature capability and AEC-Q100 qualification for automotive reliability standards. #commonpartslibrary #integratedcircuit #microcontroller #arm #m7

Charger IC Lithium Ion/Polymer 29-VQFN-HR (4x4) The BQ25792 is a switch-mode synchronous buck-boost charger with full power-path management. It can automatically regulate power flow between the input source, system load, and battery. It supports a wide input range and is designed for USB Type-C™ / USB Power Delivery (USB-PD) systems, enabling both charging and OTG (power output from battery) operation. ⭐ Key Features ⚡ High-performance charging Up to 5 A charge current Supports 1S to 4S battery packs High efficiency (up to ~96% under typical conditions) Programmable switching frequency: 750 kHz or 1.5 MHz 🔋 Wide input support Input voltage range: 3.6 V to 24 V Absolute max rating up to 30 V Supports USB adapters and barrel jack sources Detects USB charging standards (BC1.2, DCP, CDP, HVDCP, etc.) 🔄 Buck-boost power conversion Seamless buck, boost, and buck-boost operation Maintains stable system voltage even when battery is low or input varies 🔌 USB-PD / OTG support USB Power Delivery (PD 3.0 compatible) Supports OTG output (battery powers USB port) OTG voltage range: 2.8 V to 22 V 🧠 Intelligent power management NVDC power path management (system can run without battery) Dual-input power mux controller (select between two power sources) Battery supplement mode (prevents input overload) 📊 Monitoring & control Integrated 16-bit ADC for voltage, current, temperature monitoring Fully I²C configurable Autonomous or host-controlled operation 🛡️ Protection & safety Input and battery over-voltage/over-current protection Thermal regulation and shutdown Charging safety timer MOSFET protection (internal switching FETs included) 📦 Package 29-pin VQFN (4 mm × 4 mm) package Industrial temperature range: -40°C to 85°C #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Battery-charger

Temperature Sensor Digital, Local -40°C ~ 125°C 10 b 8-MSOP The MCP9808T-E/MS is a high-accuracy digital temperature sensor developed by Microchip Technology for precision thermal monitoring applications. The device communicates through a standard I²C-compatible serial interface and is optimized for low-power embedded systems requiring accurate ambient temperature measurement. It integrates internal temperature sensing, analog-to-digital conversion, programmable alert functionality, and configurable power management within a compact MSOP package. The sensor is designed for applications including industrial monitoring, consumer electronics, IoT devices, thermal management systems, medical instrumentation, and battery-powered portable equipment. Its low operating current and shutdown capability make it suitable for energy-efficient systems where thermal accuracy and minimal power consumption are critical. The device supports programmable temperature limits and interrupt generation for over-temperature events, enabling autonomous thermal supervision without continuous host processor intervention. The MCP9808T-E/MS maintains high measurement accuracy across a wide operating temperature range and offers stable digital output without requiring external calibration components. Electrical Characteristics Supply voltage operation supports low-voltage and standard logic systems. Low operating current enables efficient continuous monitoring. Shutdown mode significantly reduces power consumption during inactive periods. Digital I²C interface supports standard and fast communication modes. Integrated temperature conversion engine provides direct digital temperature output. Temperature Sensing Features High-accuracy ambient temperature measurement. Wide operating temperature range suitable for industrial environments. Programmable resolution for balancing conversion speed and precision. Configurable upper, lower, and critical temperature alert thresholds. Integrated hysteresis control for stable thermal event detection. Communication Interface I²C-compatible serial communication interface. Configurable slave addressing for multi-device bus operation. Supports read and write access to internal configuration registers. Compatible with common microcontrollers and embedded processors. Functional Features Integrated alert output for thermal event signaling. Programmable interrupt and comparator operating modes. Internal registers support temperature monitoring and device configuration. Power-on reset circuitry ensures predictable startup behavior. Device identification registers support system-level verification. Mechanical Characteristics Package type is MSOP with compact surface-mount footprint. Suitable for automated PCB assembly processes. RoHS-compliant and lead-free manufacturing. Typical Applications Industrial temperature monitoring systems. Portable battery-powered electronics. Embedded microcontroller systems. Thermal protection and supervision circuits. Consumer and IoT sensing devices. Medical and laboratory instrumentation. #CommonPartsLibrary #Sensor #Transducer #Temperature-Sensor #MCP9808

Charger IC Lithium Ion 16-VQFN (3x3) The BQ24075RGTR is a standalone linear charger and power-path management integrated circuit developed by Texas Instruments for single-cell lithium-ion and lithium-polymer battery applications. The device is designed for portable and space-constrained electronic systems requiring efficient battery charging, USB compatibility, and simultaneous system power delivery. The integrated dynamic power-path management architecture enables the system load to be powered while independently charging the battery. The charger supports operation from either a USB power source or an external adapter and includes programmable charging and input current limiting functions for optimized power management. The device incorporates multiple protection and monitoring features including thermal regulation, overvoltage protection, reverse current protection, battery temperature monitoring, and safety timers. The BQ24075RGTR also provides battery disconnect capability through the SYSOFF control function, making it suitable for low-power and portable embedded designs. Typical applications include portable consumer electronics, handheld instruments, wearable devices, wireless accessories, battery-powered IoT equipment, medical portable systems, and embedded rechargeable products. Device Features Standalone single-cell lithium-ion and lithium-polymer battery charger Integrated power-path management architecture Simultaneous battery charging and system power support USB-compatible input current limiting Programmable fast-charge current capability Dynamic power management for unstable or limited input sources Battery temperature monitoring through external thermistor input Integrated thermal regulation and protection mechanisms Reverse current, short-circuit, and input overvoltage protection Programmable safety timers for pre-charge and fast-charge modes Charging status and power-good indication outputs Battery disconnect functionality through SYSOFF control Compact surface-mount VQFN package implementation Electrical Characteristics Designed for single-cell lithium-ion or lithium-polymer batteries Fixed battery regulation voltage suitable for standard single-cell charging Supports USB and external adapter input operation Linear charging topology Wide operating temperature range for portable and industrial applications Programmable input current limit for USB compliance and adapter compatibility Package Information Package Type: VQFN Pin Configuration: Sixteen-pin package Mounting Style: Surface mount Package Dimensions: Compact three-millimeter square footprint Functional Overview The BQ24075RGTR manages power distribution between the external input source, the system load, and the rechargeable battery. When external power is present, the device prioritizes powering the system while charging the battery according to programmable charging parameters. Dynamic power management prevents excessive loading of weak USB or adapter sources by automatically reducing charging current when necessary. Thermal regulation circuitry continuously monitors device temperature and adjusts charging operation to maintain safe operating conditions. Additional integrated protection functions ensure reliable operation during fault conditions such as input overvoltage, battery temperature abnormalities, reverse current flow, and output short circuits. #commonpartslibrary #integratedcircuit #powermanagement