Connector Header Through Hole 6 position 0.100" (2.54mm) The PEC06SAAN is a compact, low-cost incremental rotary encoder manufactured by Bourns. It is designed for user interface applications requiring precise rotational input, such as volume controls, menu navigation, and position sensing. This encoder provides reliable quadrature output signals and is suitable for through-hole PCB mounting. Its robust mechanical design ensures long operational life and consistent performance in consumer and industrial electronics. Key Features Incremental (relative) rotary encoder Compact, space-saving design Through-hole mounting configuration Quadrature output (A and B channels) Optional integrated push switch (depending on variant) Detent and non-detent options available High reliability with long rotational life RoHS compliant Electrical Characteristics Supply voltage: Typically 5 VDC (logic-level output) Output type: Digital quadrature (A/B signals) Contact resistance: ≤ 100 mΩ Insulation resistance: ≥ 100 MΩ @ 250 VDC Dielectric strength: 300 VAC for 1 minute Mechanical Characteristics Rotation type: Incremental Number of pulses per revolution (PPR): Typically 6 to 24 (variant dependent) Detent positions: Variant dependent Rotational torque: 10 to 70 gf·cm (typical range) Shaft length: Varies by suffix (e.g., 15 mm typical) Shaft type: Knurled or D-cut (variant dependent) Mounting type: Through-hole PCB Terminal type: PC pins Environmental Specifications Operating temperature range: −30°C to +70°C Storage temperature range: −40°C to +85°C Humidity: Up to 85% RH (non-condensing) Mechanical Life Rotational life: Up to 30,000 cycles (typical) Physical Dimensions Body size: Approximately 12 mm × 11 mm × 5 mm (excluding shaft) Shaft diameter: Typically 6 mm Pin pitch: Standard 2.54 mm Applications Consumer electronics (audio controls, appliances) Industrial control panels Embedded systems and microcontroller interfaces Automotive user interfaces Instrumentation and test equipment #commonpartslibrary #connector #header

Rotary Switch 3 Position DP3T, Adjacent Contact 5A (AC), 500mA (DC) 125 VAC Through Hole #commonpartslibrary #switch #rotary

22 Position Receptacle Connector 0.100" (2.54mm) Through Hole Gold The SSW-122-02-G-S is a surface-mount, single-row socket strip designed for reliable board-to-board or component interconnection in electronic assemblies. It is part of a standardized connector series intended for applications requiring compact form factor, consistent electrical performance, and ease of automated placement. The component features a low-profile design suitable for dense PCB layouts and is commonly used in prototyping, embedded systems, and production-level electronics. Design and Construction The connector is manufactured with precision-aligned contacts housed in a high-temperature thermoplastic body, enabling compatibility with standard reflow soldering processes. The contact system is engineered to ensure stable mechanical retention and consistent electrical conductivity, supporting repeated mating cycles without significant degradation. The materials used provide durability, resistance to thermal stress, and compliance with common industry standards for electronic components. Electrical Characteristics The device is intended to provide reliable signal transmission with minimal contact resistance. It supports low to moderate current applications typical of signal-level interconnections. The contact plating is designed to reduce oxidation and maintain stable electrical performance over time. Mechanical Features The connector is configured as a single-row socket with a defined pitch spacing suitable for standard header interfaces. Its surface-mount termination allows for secure attachment to printed circuit boards while minimizing required board space. The structure supports proper alignment during assembly and ensures consistent engagement with corresponding mating connectors. Applications This component is widely used in applications such as microcontroller boards, communication modules, sensor interfaces, and general-purpose electronic systems. It is suitable for both development environments and final product integration where dependable and space-efficient connectivity is required. Compliance and Reliability The SSW-122-02-G-S is designed to meet common industry requirements for environmental and mechanical reliability. It is typically compliant with RoHS standards and suitable for use in a variety of operating conditions encountered in commercial and industrial electronics. #commonpartslibrary #connector #header

8 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole ## Engineering Specification ## General Description The **1726202** is a Phoenix Contact **MKKDSN series PCB terminal block** designed for compact and reliable wire-to-board connection in printed circuit board assemblies. It is intended for applications that require secure field wiring, serviceable conductor termination, and stable electrical connection between external wiring and PCB circuitry. The component is suitable for industrial control systems, automation equipment, power interfaces, instrumentation, building controls, and general electronic hardware assemblies. ## Device Identification Manufacturer Part Number: **1726202** Manufacturer: **Phoenix Contact** Product Name: **MKKDSN 1,5/ 8-5,08** Product Family: **MKKDSN 1,5** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed printed circuit board terminal block that allows external conductors to be connected directly to PCB circuits. The screw-clamp connection secures the conductor mechanically while maintaining electrical continuity through the terminal body and solder pins. This makes the component suitable for wiring interfaces that require durability, accessibility, and field-service capability. ## Mechanical Description The terminal block uses a compact green housing with a two-row terminal arrangement and side-access conductor entry. Its layout supports dense wiring connection on a printed circuit board while maintaining practical access for conductor insertion and screw tightening. The through-hole solder pins provide mechanical stability and electrical connection to the host PCB. ## Electrical Description The component is intended for low-voltage power and signal connection applications within the manufacturer’s specified current and voltage ratings. It supports conductor connection for typical industrial and control wiring requirements when used with compatible wire sizes, correct strip length, and proper tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements designed to transfer current from the inserted conductor to the PCB solder connection. The screw connection with tension sleeve helps maintain stable contact pressure and reliable conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1726202** is intended for through-hole PCB soldering, including wave-solder assembly processes. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidelines. The component should be positioned to allow safe conductor insertion, screwdriver access, and adequate clearance from nearby parts or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, relay boards, power supply interfaces, building automation equipment, instrumentation systems, sensor wiring interfaces, signal distribution boards, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current carrying requirement, voltage rating, creepage and clearance spacing, tightening torque, solder joint strength, wire routing, and user access during installation or maintenance. The terminal block should not be used beyond the manufacturer’s specified electrical, thermal, or mechanical limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkkdsn #mkkdsnterminalblock #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #wavesoldering #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

Connector Header Through Hole 18 position 0.100" (2.54mm) # TSW-118-07-G-S ## General Description The TSW-118-07-G-S is a through-hole board-to-board and wire-to-board interconnect header manufactured by Samtec. It belongs to the TSW series of standard terminal strip headers designed for reliable signal transmission in electronic assemblies, embedded systems, industrial controls, telecommunications equipment, instrumentation, and general-purpose printed circuit board applications. The component features precision-machined contacts, robust mechanical construction, and compatibility with a wide range of mating connectors. Its design supports secure electrical connections while maintaining excellent durability during repeated mating cycles and long-term operation in demanding environments. ## Key Features ### Mechanical Characteristics * Through-hole mounting configuration * Single-row terminal strip header design * Straight vertical orientation * Precision-machined contact system * High-reliability board-level interconnection ### Contact System * Gold-plated contact surface * Enhanced conductivity and signal integrity * Corrosion-resistant contact finish * Suitable for repeated insertion and removal cycles ### Electrical Characteristics * Low contact resistance * Reliable signal transmission * Suitable for low-power and signal-level applications * Stable electrical performance across operating conditions ### Material Construction * High-temperature thermoplastic insulator * Durable metallic contact structure * RoHS-compliant materials * Lead-free manufacturing compatibility ### Environmental Characteristics * Industrial-grade operating capability * Resistant to mechanical wear during mating cycles * Suitable for automated and manual assembly processes ### Application Areas * Embedded Systems * Microcontroller Development Boards * Industrial Automation Equipment * Telecommunications Hardware * Test and Measurement Instruments * Medical Electronics * Data Acquisition Systems * Prototyping Platforms * Consumer Electronic Devices * PCB Interconnection Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industry-standard connector footprint ## Manufacturer Samtec Inc. ## Product Family TSW Series Terminal Strip Headers #Samtec #TSW11807GS #TerminalStripHeader #PCBConnector #BoardToBoardConnector #WireToBoardConnector #ElectronicsComponents #EmbeddedSystems #IndustrialElectronics #InterconnectSolutions #ThroughHoleConnector #ElectronicDesign #HardwareEngineering #PCBAssembly #CommonPartsLibrary #Connector #Header #TSW pin header 1x18 2.54mm

Slide Switch SPDT Through Hole, Right Angle The SLW-864574-5A-RA-N-D, manufactured by Same Sky (formerly CUI Devices), is a single-pole double-throw (SPDT) slide switch with a right-angle, through-hole mounting configuration. It features a raised actuator for easy manual operation and is intended for PCB-based applications where space is limited but dependable switching is required. Key Features Switch Type: Slide switch (manual) Circuit Configuration: SPDT (Single Pole Double Throw) Switch Function: ON–ON (selects between two circuits) Contact Timing: Non-shorting (break-before-make) Mounting Type: Through-hole, right-angle Actuator: Raised slide, ~5 mm height Electrical & Mechanical Characteristics Rated Voltage: 50 VDC Rated Current: up to 500 mA Contact Resistance: ≤ 100 mΩ Insulation Resistance: ≥ 100 MΩ Operating Temperature: -20°C to +70°C Mechanical/Electrical Life: ~10,000 cycles Physical Characteristics Dimensions: approx. 8.6 × 4.5 × 6–7 mm Actuator Travel: ~2 mm Termination: PC pins (through-hole soldering) Orientation: Horizontal (right-angle insertion into PCB) #CommonPartsLibrary #Switch

Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst

SMB, Fakra Connector Plug, Male Pin 50 Ohms Through Hole, Right Angle Solder The FA1-NDRP-PCB-8 is a PCB-mounted connector component typically used for reliable board-to-board or cable-to-board electrical interconnections in electronic systems. It is designed to provide stable mechanical retention and dependable signal or power transfer in compact PCB assemblies. Components in this series are commonly used in industrial equipment, consumer electronics, embedded systems, and communication devices. Key Features PCB-mount connector design for easy integration into electronic assemblies Supports secure electrical and mechanical connection Compact form factor suitable for space-constrained designs Durable housing and contact structure for repeated mating cycles Designed for stable signal and/or power transmission Typically used in control boards, interface modules, and embedded electronics Compatible with automated PCB assembly processes depending on package style Typical Applications Industrial control equipment Consumer electronics Embedded and IoT devices Communication hardware Interface and expansion boards #Connector #RF-connector #Coaxial

9 Position D-Sub Receptacle, Female Sockets Connector 2311765-1 is a 9-position right-angle D-Sub receptacle connector from the TE Connectivity AMPLIMITE HD-20 series. It is designed for wire-to-board signal applications and features through-hole PCB mounting with an integrated boardlock and 4-40 screwlock for secure mechanical retention. The connector is commonly used in industrial equipment, communication systems, embedded controllers, and other electronic devices requiring a reliable D-Sub interface. Key Features 9-position D-Sub receptacle (female) Right-angle through-hole PCB mounting AMPLIMITE HD-20 series 2-row configuration 2.77 mm (0.109") contact pitch Boardlock for improved PCB retention 4-40 screwlock for secure mating Maximum contact current: 3 A per contact Glass-filled PBT housing Operating temperature: -55°C to +85°C Ideal for signal transmission in industrial and embedded applications. #CommonPartsLibrary #Connector #TEConnectivity #AMPLIMITE #DSub #RightAngleConnector #PCBConnector #ThroughHole #WireToBoard #SignalConnector #ElectronicComponents #EmbeddedSystems

Slide Switches SP3T SLIDE SWITCH GOLD CONTACT #CommonPartsLibrary #Switch #Slide-Switch

Battery Contact Solid (Positive) Multiple - Cell PC Pin #commonpartslibrary #batteryholder #coil

Connector Header Through Hole, Right Angle 6 position 0.118" (3.00mm) The Molex 0430450623 is a 6-position, dual-row, right-angle through-hole header with a 3.00 mm pitch, part of the Micro-Fit 3.0 (43045 series) connector family. It is commonly used for compact, high-reliability power and signal connections in industrial, automotive, and electronic systems. Key Features Series: Molex Micro-Fit 3.0 (43045) Number of positions: 6 pins (2 rows) Pitch: 3.00 mm (0.118") Mounting type: Through-hole, right-angle PCB mount Contact type: Male pin header Current rating: up to ~8 A (depending on wire gauge) Voltage rating: 600 V Contact material: Brass Contact finish: Gold (mating side), Tin (tail side) Locking mechanism: Latch / ramp for secure mating Operating temperature: -40°C to +105°C Flammability rating: UL94 V-0 housing material Housing material: Glass-filled LCP (Liquid Crystal Polymer) Board retention: PCB lock / press-fit retention feature Typical Applications Automotive electronics Industrial control systems Power distribution modules Consumer appliances Telecommunications equipment Medical devices #CommonPartsLibrary #Connector #Molex #MicroFit3_0 #0430450623 #Connector #RightAngleHeader #3mmPitch #WireToBoard #PowerConnector #PCBHeader

Connector Header Panel Mount, Through Hole, Right Angle 2 position 0.215" (5.46mm) Deutsch DT 2-position connector DT13-2 style DT13-2P is a 2-position, right-angle wire-to-board PCB header from the DEUTSCH DT Series by TE Connectivity. It is designed for rugged automotive, industrial, heavy equipment, and off-road applications where reliable power and signal connections are required. The connector features a sealed interface, through-hole solder termination, and a durable housing that withstands harsh environments, including vibration, moisture, and extreme temperatures. Key Features: 2-position right-angle PCB header DEUTSCH DT sealed connector system Through-hole solder termination 5.46 mm (0.215 in) pitch Rated up to 13 A contact current Maximum operating voltage of 250 VAC/VDC Operating temperature range: -55°C to +125°C Nickel-plated contacts for corrosion resistance Suitable for both power and signal applications Rugged design for automotive and industrial environments #CommonPartsLibrary #Connector #DT13-2P #TEConnectivity #DeutschDT #PCBHeader #WireToBoard #SealedConnector #AutomotiveConnector #IndustrialConnector #ThroughHole #RightAngleConnector #PowerConnector #SignalConnector

Battery Retainer Coin, 24.5mm 1 Cell SMD (SMT) Tab BAT-HLD-006-SMT is a surface-mount coin-cell battery holder designed for secure retention of a single CR2450 lithium coin battery in compact PCB applications. Manufactured by TE Connectivity, it provides a low-profile, reliable power solution for embedded systems, wireless sensors, IoT devices, medical electronics, and backup power circuits. The holder features a horizontal battery orientation, phosphor bronze construction, and nickel-plated contacts for durability and dependable electrical performance. Key Features Supports one CR2450 coin-cell battery Surface-mount (SMT) PCB installation Horizontal battery orientation for low-profile designs Nickel-plated contacts for reliable conductivity and corrosion resistance Phosphor bronze construction for mechanical durability Maximum contact current rating of 1 A Compact design with approximately 6.88 mm height above PCB Suitable for automated assembly and reflow soldering processes Ideal for RTC backup, wireless modules, portable electronics, and IoT devices #BatteryHolder #CR2450 #CoinCellHolder #SMT #SurfaceMount #TEConnectivity #PowerManagement #EmbeddedSystems #IoT #PCBDesign #Electronics #BatteryRetainer #HardwareDesign #ElectronicComponents

100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold The DF40C-100DS-0.4V(51) is a board-to-board and board-to-FPC receptacle connector manufactured by Hirose Electric. It belongs to the DF40 series, a family of fine-pitch stacking connectors intended for compact, high-density interconnect applications such as mobile devices, cameras, wearables, and other space-constrained electronics. The connector functions as the receptacle (socket) half of a mating pair, designed to stack with a corresponding DF40 plug header to join two printed circuit boards, or a printed circuit board and a flexible printed circuit, in a low-profile vertical arrangement. This particular part number represents the full-position, low-profile variant within the series, configured without a reinforcing metal fitting and without a locating boss or mechanical holddown feature, meaning it relies on the contact array itself rather than additional structural hardware for mechanical retention during reflow and handling. The connector is supplied in straight, surface-mount form and is non-polarized, so it can be inserted in either orientation relative to its mating counterpart. Contacts are arranged in parallel rows along the connector body, with gold plating in the contact mating area to ensure reliable signal continuity and resistance to oxidation over repeated use. The series is positioned by Hirose as a general-purpose, high-speed-capable interconnect, suitable for a range of differential and single-ended signaling standards used in consumer and industrial electronics, with the broader DF40 family supporting interfaces such as USB, MIPI, SATA, and PCIe. Its low stacking height and fine contact pitch make it well suited to applications where board-to-board spacing must be minimized, such as camera modules, display modules, or stacked daughterboard architectures in handheld and wearable products. The connector is packaged on embossed carrier tape for automated pick-and-place assembly, and its construction is compliant with RoHS material restrictions. Mechanically, the connector body is built to support repeated mating cycles typical of consumer electronics assembly and rework, while maintaining stable electrical contact under vibration and thermal cycling across its rated environmental range. As a stacking-style connector rather than a card-edge or cable-mount type, it is intended to be soldered directly to a host PCB pad pattern, with the mating plug soldered to the corresponding board or FPC, allowing the two assemblies to be joined and separated as needed during manufacturing, test, or service operations. Spec Sheet Identification Part Number: DF40C-100DS-0.4V(51) Series: DF40 Variant: "C" type — without reinforcing metal fitting Connector Type / Configuration Type: Receptacle (socket), board-to-board / board-to-FPC Gender: Female Orientation: Straight Row Arrangement: Dual row Polarization: Non-polarized Locking/Retention Feature: None (no metal holddown or locating boss) Electrical Ratings Current Rating: Low-current signal class Voltage Rating: Standard signal-level rating typical of fine-pitch board-to-board connectors Applicable High-Speed Protocols: USB, MIPI, SATA, PCIe (series capability) Transmission Rate: High-speed, multi-gigabit class (series capability) Mechanical Specifications Contact Pitch: Fine pitch Mounting Pitch: Matches contact pitch Stacking/Mated Height: Low-profile Mounting Method: Surface mount technology (SMT) Mating Cycles: Rated for repeated mate/unmate cycles typical of consumer electronics rework Contact & Material Properties Contact Material: Phosphor bronze Contact Plating (Mating Area): Gold Insulator Color: Black Insulator Material: High-temperature engineering resin suitable for SMT reflow Environmental Ratings Operating Temperature Range: Extended consumer/industrial range RoHS Compliance: Yes Packaging Packaging Format: Embossed carrier tape, reel format Packaging Code Meaning: Suffix denotes embossed tape packaging at a standard reel quantity Mating Compatibility Mates With: Corresponding DF40 series plug/header connector Application Note: Intended for mezzanine-style stacking between two PCBs or between a PCB and FPC #DF40 #Hirose #HiroseElectric #BoardToBoard #BoardToFPC #StackingConnector #CommonPartsLibrary #Connector #SMTConnector #FinePitchConnector #MezzanineConnector #ElectronicComponents #PCBDesign #HardwareEngineering #ConnectorDatasheet #EngineeringSpec #ConsumerElectronics #HighSpeedConnector #RoHSCompliant #ComponentLibrary

Battery Contact Spring (Coil) Multiple - Cell PC Pin #commonpartslibrary #batteryholder #coil

BergStak 0.40mm, 100 position, Receptacle, 4mm stack height 100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold 10164227-1004A1RLF is a high-density board-to-board mezzanine connector from Amphenol ICC (FCI), part of the BergStak® 0.40 mm series. It is designed for compact electronic systems that require reliable high-speed signal interconnection between stacked PCBs. This component is a 100-position, surface-mount receptacle connector with center strip contacts. It uses a 0.40 mm pitch to support very high pin density in a small footprint. It is commonly used in applications like smartphones, industrial modules, embedded computing, and other space-constrained electronic assemblies. Key Features 100 positions for high-density signal routing 0.40 mm fine pitch for compact PCB designs Board-to-board mezzanine (receptacle type) Surface-mount (SMT) mounting for automated assembly Center strip contact design for stable mating Gold-plated contacts for improved conductivity and corrosion resistance Mated stacking height around 4 mm Low-profile design suitable for thin electronic devices Typical Applications Smartphones and mobile devices Wearable electronics Industrial control modules Embedded computing boards Communication and networking equipment #AmphenolICC #FCI #BergStak #BoardToBoardConnector #MezzanineConnector #0_40mmPitch #SurfaceMount #HighDensityConnector #100PositionConnector #ElectronicsComponents

REL-MR- 12DC/21-21AU - Plug-in miniature power relay, with multi-layer gold contact, 2 changeover contacts, input voltage 12 V DC General Purpose Relay DPDT (2 Form C) 12VDC Coil Through Hole The Phoenix Contact 2961299 (REL-MR-12DC/21-21AU) is a plug-in miniature power relay designed for reliable switching in industrial automation, control panels, and interface applications. It features a 12 VDC monostable coil, 2 changeover (DPDT) contacts, and hard gold-plated AgNi contacts, making it suitable for switching low-level signals with high reliability. The relay is RT III sealed (wash-proof), ensuring protection against contaminants during PCB cleaning and harsh industrial environments. It is intended for use with compatible Phoenix Contact relay bases and accessories. Key Features 12 VDC monostable coil operation 2 changeover (DPDT) contacts Hard gold-plated AgNi contacts for reliable low-level signal switching RT III sealed (wash-proof) construction Mechanical life: up to 30 million operations 5 kV coil-to-contact isolation Fast operate and release times (typ. 7 ms / 3 ms) Designed for industrial control, PLC interfaces, automation, and switching applications Compatible with Phoenix Contact relay sockets and interface modules #PhoenixContact #Relay #PowerRelay #DPDTRelay #IndustrialAutomation #ControlPanel #PLC #InterfaceRelay #12VDC #ElectromechanicalRelay

Thermal Image Sensor 32H x 24V TO-39 # MLX90640ESF-BAB-000-TU Engineering Specifications **General Description** The MLX90640ESF-BAB-000-TU is a contactless infrared thermal imaging sensor manufactured by Melexis. It incorporates a microbolometer array that detects infrared radiation emitted by objects and converts the captured thermal energy into temperature data, enabling the creation of thermal images without physical contact. The device is designed for compact and cost-effective thermal imaging applications, offering high thermal sensitivity and accurate temperature measurement capabilities. It integrates a digital signal-processing engine, calibration data memory, and a digital communication interface, allowing direct connection to microcontrollers, embedded systems, and industrial monitoring equipment. The sensor provides real-time thermal mapping across its field of view and is suitable for applications involving human presence detection, predictive maintenance, industrial automation, smart building systems, medical screening, consumer electronics, robotics, and thermal monitoring solutions. Its factory calibration ensures stable performance throughout its operating life while minimizing external calibration requirements. **Engineering Specifications** **Manufacturer:** Melexis **Manufacturer Part Number:** MLX90640ESF-BAB-000-TU **Component Type:** Infrared thermal imaging sensor **Sensor Technology:** Microbolometer thermal sensor array **Measurement Method:** Non-contact infrared temperature sensing **Output Type:** Digital thermal image data **Communication Interface:** I²C-compatible serial interface **Temperature Measurement Capability:** Object temperature monitoring and thermal imaging **Thermal Imaging Function:** Real-time thermal map generation **Integrated Processing:** On-chip signal processing and calibration management **Calibration:** Factory calibrated with stored calibration parameters **Power Supply Configuration:** Single-supply operation **Power Consumption:** Optimized for low-power embedded applications **Refresh Rate:** Programmable thermal frame refresh operation **Thermal Sensitivity:** High-sensitivity infrared detection **Field of View Variant:** Wide-angle thermal imaging configuration **Accuracy Characteristics:** High-precision temperature measurement with integrated compensation algorithms **Memory Features:** Internal EEPROM for calibration coefficients **Operating Mode:** Continuous and programmable thermal acquisition **Data Output Format:** Digital temperature and thermal pixel information **Environmental Stability:** Designed for reliable operation across varying ambient conditions **Electromagnetic Compatibility:** Suitable for embedded and industrial electronic systems **Package Type:** Surface-mount package with infrared-transparent window **Mounting Style:** Surface mount technology **Package Construction:** Reflow-solderable assembly **Lead Finish:** Lead-free finish **Environmental Compliance:** RoHS compliant and halogen-free **Reliability Features:** Factory-tested and production-calibrated thermal imaging device **Typical Applications** Thermal cameras Human presence detection systems Occupancy monitoring Industrial predictive maintenance Electrical equipment inspection Smart building automation HVAC monitoring systems Medical screening devices Consumer electronics Robotics and autonomous systems Fire detection and prevention systems Industrial process monitoring Energy management systems Automotive thermal sensing applications Security and surveillance equipment #MLX90640 #MLX90640ESF #Melexis #ThermalSensor #InfraredSensor #ThermalImaging #Microbolometer #TemperatureSensor #IndustrialAutomation #EmbeddedSystems #IoT #PredictiveMaintenance #SmartBuilding #ThermalCamera #ElectronicComponents #EngineeringSpecifications

77 (55 + 22 Ground) Position Header, Male Pins Connector 0.079" (2.00mm) Through Hole The 5106081‑1 is a high-reliability male PCB connector manufactured by TE Connectivity. It belongs to the Z‑PACK 2 mm HM Series, designed for mezzanine and backplane board-to-board interconnects. The connector features precision-machined phosphor bronze contacts with tin plating, ensuring consistent electrical conductivity, low contact resistance, and long-term reliability. The device has a through-hole press-fit termination style for robust mechanical attachment to printed circuit boards and optimal compatibility with automated assembly processes. Its vertical orientation and standardized 2 mm pitch allow compact, high-density PCB layouts while maintaining reliable alignment and mating with compatible female headers. The connector is engineered to support repeated insertion cycles, high signal integrity, and consistent electrical performance in industrial, telecommunications, and embedded electronic applications. General Description The 5106081‑1 is a durable, 77-position male PCB connector intended for high-density board-to-board interconnect solutions. It provides secure electrical connections, mechanical stability, and long-term reliability in demanding electronic systems. Widely used in industrial automation, telecommunications, and embedded computing, this connector ensures precise mating, easy PCB integration, and robust operation in backplane and mezzanine applications. Its press-fit through-hole design, reliable contact material, and standardized footprint make it a versatile solution for complex multi-board electronic assemblies. #TEConnectivity #PCBConnector #MaleHeader #BoardToBoard #ZPACK #2mmPitch #HighDensityInterconnect #ThroughHole #PressFit #IndustrialElectronics #Telecommunications #EmbeddedSystems #ElectricalEngineering #ReliableConnection #EngineeringSpec #ElectronicConnector #HighPerformanceConnector

USB Type C PMIC 40-TQFN (6x6) The MAX25432 combines an automotive-grade buckboost controller capable of full-range 3.3V to 21V programmable power supply (PPS) at up to 6.35A, USB Power Delivery (USB PD) analog front-end (AFE), legacy USB charging support, and USB Type-C® protection switches for automotive USB host or downstream-facing (DFP) applications. The USB TypeC protection switches provide automotive system-level ESD protection and 24V short-circuit protection for D+, D-, CC1, CC2, and VCONN. The device can optionally support legacy charging modes for older passenger phones including BC1.2, Apple® Charge, Apple CarPlay®, Apple MFi, and USB On-The-Go (OTG). The MAX25432B integrates a USB PD AFE, which supports the USB-IF Type-C Port Controller Interface (TCPCI) specification and can interface with any I2C controller in the application. The MAX25432A provides configuration channel (CC) signal pass-through protection for an external USB PD controller. P-suffix and G-suffix devices include intelligent detection and protection to avoid high short-circuit currents flowing from the car battery through the cable shield to ground during fault events, thus preventing car module damage. The MAX25432 is available in a small, 6mm x 6mm, 40- pin TQFN-EP package and requires very few external components. The MAX25432 evaluation (EV) kit and collateral provide a convenient platform to the design engineer for rapid evaluation with reduced test and firmware development time. Integrated I2C Buck-Boost Controller with PPS 4.5V to 36V Input Operating Range 3.3V to 21V Constant Voltage, 10mV LSB 1A to 6.35A Current Limit, 25mA LSB 220kHz, 300kHz, and 400kHz SwitchingFrequency VBUS Cable Compensation up to 516mΩ External Frequency Synchronization and SpreadSpectrum for Reduced EMI USB PD 3.1 Type-C Port Controller USB-IF Compliant - TID 9154 Up to 800mV Ground Offset Pairs with ADI TCPM for Turn-Key Solution MAX25432BATLP Enables: ADI TCPM Alternate Mode and Dual-Role Port Improved CC Detection Advanced Monitoring Algorithms (V, T) Dynamic Loop Control Highest Performance, Safest, and Lowest Cost Passenger Cable-Shield Short-to-Battery Protection Minimizes Short-Circuit Currents with a Small,Single-FET Solution Integrated Current-Sense Amplifiers, ADC and DAC Integrated 3.3V to 5.0V, 1.5W, Smart, Reliable VCONN Switches and Protection, 50mA to 500mA OCP Integrated 24V DC Protection on Protected HVD+, HVD-, HVCC1, HVCC2 Outputs Integrated Legacy USB 2.0 Charging Support Including BC1.2, Apple CarPlay, OTG, and Apple MFi Rev 3x Integrated ±15kV Air-Gap/±8kV Contact Discharge ISO 10605 and IEC 61000-4-2 ESD Protection -40°C to +125°C Operating Temperature Range 40-Pin, 6mm x 6mm, TQFN Package with EP AEC-Q100 and AEC-Q006 Qualified #CommonPartsLibrary #IntegratedCircuit #PowerManagement

Battery Contact Clip Multiple (AA, CR2) 1 Cell PC Pin Keystone Electronics 2915 Battery Contact Clip is a through-hole PCB battery contact clip designed for securely mounting cylindrical batteries such as AA and CR2 cells in electronic circuits. Manufactured by Keystone Electronics, this component provides a compact and reliable battery connection solution for embedded systems, portable devices, battery-powered equipment, and prototyping applications. It uses PC pin terminations for easy solder mounting onto printed circuit boards. Key Features Supports cylindrical battery sizes including AA and CR2 Single-cell battery contact clip design Through-hole PCB mounting PC pin termination style Compact low-profile construction Reliable spring-contact battery retention Suitable for portable and battery-powered electronics Durable metal contact construction Easy battery insertion and removal Active production status from Keystone Electronics

USB-C (USB TYPE-C) Receptacle Connector 24 Position Panel Mount, Through Hole, Right Angle The MUSBRM1C1M0 is a ruggedized USB Type-C receptacle connector designed for high-reliability data and power connectivity in industrial, embedded, transportation, and harsh-environment applications. The connector features a reversible USB Type-C interface that supports modern high-speed communication protocols while providing robust mechanical durability and secure board-level attachment. Its reinforced construction helps withstand vibration, shock, and repeated mating cycles, making it suitable for demanding applications where reliability and long service life are critical. The device is commonly used in industrial controllers, communication equipment, medical devices, consumer electronics, and next-generation embedded systems requiring compact and versatile connectivity. Engineering Specifications Manufacturer: Amphenol Communications Solutions Part Number: MUSBRM1C1M0 Connector Type: USB Type-C Receptacle Interface Standard: Universal Serial Bus Type-C Connector Gender: Receptacle Mounting Style: Surface Mount Orientation: Right Angle Contact Configuration: USB Type-C Multi-Function Interface Data Support: High-Speed Data Transmission Power Delivery Support: Compatible with USB Power Delivery Architectures Shielding: Integrated EMI Shielding Contact Material: Copper Alloy Contact Finish: Gold-Plated Contact Interface Housing Material: High-Strength Metal Shield Construction Durability: High Mating Cycle Life Environmental Performance: Designed for Industrial Applications Operating Temperature Range: Industrial Grade RoHS Compliant: Yes Applications: Embedded Systems, Industrial Automation, Consumer Electronics, Communication Equipment, Medical Devices, IoT Products, Portable Electronics, Data Acquisition Systems Key Features Reversible USB Type-C connection interface Ruggedized mechanical construction High-speed data communication capability Secure PCB mounting design Enhanced resistance to vibration and mechanical stress Integrated shielding for improved electromagnetic compatibility Compact footprint for space-constrained designs Supports modern USB power and data architectures Long operational lifespan with high insertion cycle durability Suitable for industrial and commercial electronic systems #MUSBRM1C1M0 #Amphenol #USBTypeC #USBConnector #TypeCReceptacle #HighSpeedConnectivity #PowerDelivery #IndustrialElectronics #EmbeddedSystems #CommunicationEquipment #IoTDevices #ConsumerElectronics #PCBDesign #ElectronicComponents #SurfaceMount #DataTransmission #USBPD #IndustrialAutomation #MedicalElectronics #ConnectorTechnology

60 Position Connector Socket, Outer Shroud Contacts Surface Mount Gold The ERF8-030-05.0-S-DV-L-K-TR is a high-speed board-to-board mezzanine socket connector from the Samtec Edge Rate™ ERF8 series. It is designed for reliable high-density interconnection in compact embedded, industrial, communication, and high-speed digital systems. The connector features a rugged dual-row surface-mount design with outer shield contacts to improve signal integrity and reduce EMI in high-speed applications. Key features: 60-position dual-row mezzanine socket connector 0.80 mm pitch for high-density PCB layouts Surface-mount termination Edge Rate™ contact system optimized for high-speed signaling Gold-plated contacts for improved durability and conductivity Supports multiple stacking heights (7 mm, 10 mm, 13 mm, 14 mm, 20 mm) Includes board guide, latch, and pick-and-place features Operating temperature range: -55°C to +125°C Rated current up to 2.2 A per pin Designed for rugged board-to-board applications with enhanced signal integrity #CommonPartsLibrary #Connector #ERF8-030

2 Line Common Mode Choke Surface Mount 100mA DCR 3Ohm (Typ) , -55C ~ 125C The ECMF2-40A100N6 and ECMF4-40A100N10 are highly integrated common mode filters designed to suppress EMI/RFI common mode noise on high speed differential serial buses like HDMI 2.1, HDMI 2.0, HDMI1.4, USB4, USB 3.2 Gen 2, USB 2.0, ethernet, MIPI, Display Port and other high speed serial interfaces. They have a very large differential bandwidth to comply with these standards and can also protect and filter one or two differential lanes. 10.7 GHz differential bandwidth to comply with HDMI 2.1, HDMI 2.0, HDMI 1.4, USB4, USB 3.2 Gen2, USB 2.0, MIPI, Display port 2.0, etc. • High common mode attenuation on WLAN frequencies: – -15 dB at 2.4 GHz – -21 dB at 5.0 GHz – -17 dB at 6.0 GHz • Low serial resistance: 3.0 Ω • Very low PCB space consumption • Thin package: 0.5 mm max. • High reduction of parasitic elements through integration • Lead free and RoHS package • Exceeds IEC 61000-4-2 level 4 standard: – Contact discharge: ◦ ±9 kV (contact discharge, ECMF2-40A100N6) ◦ ±10 kV (contact discharge, ECMF4-40A100N10) – Air discharge: ◦ ±20 kV (air discharge, ECMF2-40A100N6) ◦ ±25 kV (air discharge, ECMF4-40A100N10)