High-Voltage SPI Digital Potentiometer – Single-channel 8-bit digital potentiometer for programmable gain control, industrial automation, instrumentation, audio equipment, sensor calibration, power supplies, and embedded analog signal conditioning. Features 50 kΩ nominal resistance with 256 wiper positions (8-bit resolution), a linear taper, and an SPI serial interface for precise digital control. Supports separate digital and analog supply rails, with a digital supply of 1.8 V to 5.5 V and an analog supply up to 36 V (10 V to 36 V single supply or ±5 V to ±18 V dual supply), making it suitable for high-voltage analog applications. Includes 145 Ω typical wiper resistance, 100 ppm/°C temperature coefficient, volatile memory, shutdown capability, and AEC-Q100 qualification for high-reliability environments. Operates over a −40°C to +125°C temperature range and is housed in a 14-pin TSSOP package. #Microchip #MCP41HV51503EST #MCP41HV51 #DigitalPotentiometer #SPIPotentiometer #ProgrammableResistor #HighVoltage #AnalogControl #SignalConditioning #IndustrialElectronics #AECQ100 #EmbeddedSystems

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-223-5 Linear Voltage Regulator (LDO) providing a fixed 3.3 V output with up to 500 mA output current from an input voltage range of 2.3 V to 6.0 V. It features low dropout voltage, stable operation with ceramic output capacitors, current limiting, short-circuit protection, and overtemperature protection, making it suitable for low-voltage power regulation applications. #LDO #LinearVoltageRegulator #FixedOutput #3V3 #500mA #LowDropout #PowerManagement #Microchip

Comparator Standard (General Purpose) CMOS, Push-Pull, Rail-to-Rail, TTL 8-SOIC Comparator for comparing two analog input voltages and providing a digital output signal. The MCP6542-E/SN is a dual, single-supply comparator operating from 1.6 V to 5.5 V, with 600 nA typical supply current per comparator, 4 µs typical response time, and rail-to-rail input operation, making it suitable for low-power voltage monitoring, threshold detection, and sensing applications. #Comparator #DualComparator #LowPower #SingleSupply #RailToRailInput #VoltageMonitoring #ThresholdDetection #Microchip #MCP6542

7-Port Gigabit Managed Ethernet Switch IC – High-performance Layer 2 managed Ethernet switch designed for industrial automation, IoT gateways, embedded networking, automotive networking, IP cameras, networked audio/video systems, and communication equipment. Integrates 7 Gigabit Ethernet ports with 5 integrated 10/100/1000BASE-T PHYs, 1 SGMII interface, and 1 configurable RGMII/MII/RMII interface, enabling flexible network architectures. Supports IEEE 802.3 Ethernet standards, QoS, VLAN (802.1Q), Rapid Spanning Tree Protocol (RSTP), IGMP snooping, LinkMD® cable diagnostics, Energy Efficient Ethernet (EEE), Wake-on-LAN (WoL), port mirroring, rate limiting, and advanced packet filtering for robust managed networking. Features I²C and SPI management interfaces, operates from 1.8 V, 2.5 V, and 3.3 V supplies, and is specified for the −40°C to +85°C industrial temperature range. Packaged in a 128-pin TQFP-EP (14 × 14 mm) for high-density embedded networking designs. #Microchip #KSZ9897STXITR #KSZ9897 #GigabitEthernetSwitch #ManagedSwitch #Layer2Switch #IndustrialEthernet #SGMII #RGMII #IoTGateway #NetworkController #EmbeddedSystems

Low-Side Gate Driver IC Non-Inverting 8-PDIP MOSFET Gate Driver for driving power MOSFETs and other capacitive loads. Operates from a 4.5V to 18V supply and provides 6A peak source/sink output current with high-speed switching. Features a single non-inverting driver in an 8-pin PDIP (CPA) package. #MOSFETGateDriver #GateDriver #SingleChannel #6A #4.5Vto18V #NonInverting #PDIP8 #Microchip

CAN Controller CAN 2.0 SPI Interface 14-VDFN (4.5x3) External CAN FD Controller for adding CAN FD and Classical CAN connectivity to a host MCU via an SPI interface. Supports CAN FD data rates up to 8 Mbps, SPI clock up to 20 MHz, operates from a 2.7 V to 5.5 V supply, and integrates 2 KB message RAM, 31 FIFOs, transmit queue, acceptance filters, and timestamping. #ExternalCANController #CANFD #ClassicalCAN #SPI #8Mbps #20MHzSPI #2.7Vto5.5V #Microchip