Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount #commonpartslibrary #sensor #humidity

IC RF TxRx Only Bluetooth, WiFi Bluetooth v5.0, Thread, Zigbee® 2.412GHz ~ 2.484GHz 32-VFQFN Exposed Pad The ESP32-C6FH4 is a low-power, highly integrated wireless microcontroller from Espressif Systems, designed for IoT applications. It is based on a 32-bit RISC-V processor running at up to 160 MHz, providing efficient performance for embedded systems while maintaining low power consumption. This variant includes 4 MB of embedded flash memory, making it suitable for standalone applications without the need for external flash. The ESP32-C6FH4 supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band (backward compatible with Wi-Fi 4/802.11 b/g/n) Bluetooth Low Energy (BLE 5) IEEE 802.15.4 (used for protocols like Thread and Zigbee) Key features include: Rich set of GPIO pins with support for peripherals such as UART, SPI, I2C, PWM, ADC, and more Integrated hardware security features (secure boot, flash encryption, cryptographic accelerators) Multiple low-power modes for battery-operated devices On-chip temperature sensor and RTC peripherals #commonpartslibrary #transceiver

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) Pin header connector for board-to-board interconnection, featuring a 3-position, single-row, right-angle through-hole configuration with a 2.54 mm pitch. It is rated for 250 V and 3 A, uses gold-plated contacts, and is specified for an operating temperature range of −40 °C to +105 °C. #PinHeader #BoardToBoard #Connector #ThroughHole #RightAngle #2.54mmPitch #3Pin #250V #3A #WurthElektronik #WRPHD

2-Position Horizontal Through-Hole Terminal Block – Single-level wire-to-board terminal block designed for industrial automation, power supplies, control systems, instrumentation, HVAC equipment, embedded electronics, and general-purpose PCB power connections. The Würth Elektronik 691137710002 is part of the WR-TBL Series 1377, featuring 2 positions on a 5.00 mm pitch with a horizontal (side-entry) wire orientation and through-hole PCB mounting. It utilizes a screw clamp with leaf spring and wire guard for secure wire retention, supporting 12–30 AWG conductors. Rated for 16 A and 300 V, it is constructed with nickel-plated copper alloy contacts, a zinc-plated M2.5 screw, and a polycarbonate (PC) housing. The terminal block has a recommended tightening torque of 0.4 Nm (3.5 lb-in) and operates over a −30°C to +120°C temperature range, making it suitable for reliable industrial and embedded power interconnections. #WurthElektronik #691137710002 #WRTBL1377 #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHoleConnector #IndustrialAutomation #PowerSupply #EmbeddedSystems #PCBConnector #ControlSystems

Board Mount Humidity Sensors Intermediate Humidity and Temperature Sensor Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R2 is a fully calibrated, low-power environmental sensor that measures relative humidity (RH) and temperature. It integrates sensing elements, signal processing, and a digital interface into a small surface-mount package, making it ideal for space-constrained designs. Key Features Sensor Type: Digital humidity and temperature sensor Interface: I²C (easy MCU integration) Supply Voltage: ~1.08 V to 3.6 V Humidity Accuracy: up to ±1.8% RH (typical) Temperature Accuracy: up to ±0.2 °C (typical) Response Time: Fast measurement and low latency Power Consumption: Ultra-low, suitable for battery devices Package: DFN (compact, ~1.5 × 1.5 mm) Factory Calibration: No external calibration required Functional Overview The sensor uses capacitive humidity sensing combined with a bandgap temperature sensor. Internal electronics convert these measurements into digital data via I²C, eliminating the need for external ADCs or complex signal conditioning. Design Advantages Small footprint for compact PCBs Low power consumption for IoT and portable devices High reliability with long-term stability Fast response time for real-time monitoring Simple integration with microcontrollers Typical Applications IoT and smart home devices HVAC and climate control systems Wearables and portable electronics Industrial monitoring systems Environmental data logging #CommonPartsLibrary #Sensors,-Transducer #Humidity #Moisture-Sensor #SHT4x

3-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for consumer electronics, industrial controls, embedded systems, home appliances, IoT devices, instrumentation, and general-purpose wire-to-board interconnect applications. The JST B3B-PH-K-S is part of the PH Series, featuring 3 positions on a 2.00 mm (0.079") pitch with a through-hole vertical PCB mount. It utilizes brass square pins with tin plating, a 4-wall polarized shroud, and a detent locking mechanism for secure mating with compatible PH series crimp housings. Rated for 2 A and 100 V, it is constructed with a UL94 V-0 rated PA66 (Nylon 6/6) housing, providing reliable electrical and mechanical performance. The connector supports press-fit and solder termination, operates over a −25°C to +85°C temperature range, and is ideal for compact embedded and industrial board-to-wire applications. #JST #B3BPHKS #PHSeries #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #2mmPitch #BoardToCable #IndustrialElectronics #EmbeddedSystems #Connector

Green LED Indication - Discrete 2.2V 0603 (1608 Metric) The SML-LX0603GW-TR is a surface-mount white LED in a compact 0603 (1608 metric) package, designed for indicator and backlighting applications. It offers high brightness with low power consumption and wide viewing angle, making it suitable for portable and space-constrained electronic devices. The device is optimized for automated assembly and is supplied in tape-and-reel packaging. Key Features White LED (cool white emission) Compact 0603 (1.6 mm × 0.8 mm) SMD package High luminous intensity with low forward current Wide viewing angle (~120° typical) Low power consumption Compatible with reflow soldering Tape & reel packaging for automated assembly Optical Characteristics (Typical values) Emission Color: White Luminous Intensity: ~100 to 300 mcd @ 20 mA Color Temperature: ~6000K to 8000K Viewing Angle: 120° Electrical Characteristics (Typical values unless otherwise specified) Forward Voltage (VF): Typ: 3.0 V Max: 3.4 V @ 20 mA Forward Current (IF): 20 mA (continuous) Reverse Voltage (VR): 5 V Power Dissipation: ~75 mW Absolute Maximum Ratings Forward Current: 25 mA (continuous) Peak Forward Current: 100 mA (pulse, short duration) Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +100°C Mechanical Characteristics Package Type: 0603 (1608 metric) Dimensions: ~1.6 mm × 0.8 mm × 0.8 mm Mounting Type: Surface mount (SMT) Polarity: Cathode marking on package Material Specifications Lens: Epoxy resin (diffused) LED Chip: InGaN (Indium Gallium Nitride) Lead Frame: Copper alloy with silver plating Packaging Information Packaging Type: Tape & Reel (TR) Reel Quantity: Typically 3,000–5,000 pcs per reel RoHS Compliant: Yes Lead-Free: Yes Typical Applications Status indicators Backlighting (LCD, keypad, buttons) Consumer electronics Portable devices Automotive interior lighting (low-power) #commonpartslibrary #optoelectronic #led #SML-LX0603

Tactile Switch SPST-NO Top Actuated Surface Mount The B3FS-1002P is a compact, surface-mount tactile switch designed for low-profile input applications. It provides a momentary contact mechanism with a distinct tactile feedback, making it suitable for user interface controls in consumer electronics, industrial devices, and compact embedded systems. The switch features a sealed construction for improved reliability and is optimized for automated PCB assembly processes. Mechanical Characteristics Mounting Type: Surface Mount (SMD) Actuator Style: Top push Actuator Height: Low profile Outline: Rectangular compact body Terminal Type: Gull-wing terminals Sealing: Dust-resistant (sealed construction) Electrical Characteristics Switch Type: Single Pole Single Throw (SPST) Contact Configuration: Normally Open (NO) Rated Voltage: Low voltage DC applications Rated Current: Suitable for signal-level switching Contact Resistance: Low initial contact resistance Insulation Resistance: High insulation resistance between terminals Operating Characteristics Operating Force: Standard tactile force (manufacturer-defined variant) Travel Distance: Short stroke tactile action Operating Life: High durability for repeated actuation cycles Bounce Time: Minimal contact bounce for reliable switching Environmental Characteristics Operating Temperature Range: Wide operating range suitable for consumer and industrial use Storage Temperature Range: Standard electronic component storage conditions Humidity Resistance: Designed to withstand typical ambient humidity conditions Material & Construction Actuator Material: High-strength polymer Housing Material: Heat-resistant plastic Contact Material: Metal alloy with surface plating for durability Terminal Finish: Solderable finish compatible with reflow soldering Packaging Information Packaging Type: Tape and reel Assembly Compatibility: Fully compatible with automated pick-and-place and reflow processes Applications Consumer electronics (keypads, remote controls) Industrial control panels Portable devices Embedded system user interfaces Wearable and compact electronics #commonpartslibrary #switch #tactile

Humidity, Temperature 0 ~ 100% RH Digital ±1.5% RH 8 s Through Hole #CommonPartsLibrary #Sensor #Transducer #Humidity #Mositure-Sensor

Humidity, Temperature 0 ~ 100% RH I2C ±2% RH 15 s Surface Mount

Temperature Sensor Digital, Infrared (IR) -40°C ~ 85°C 16 b TO-39 #commonpartslibrary #integratedcircuit #sensor #temperature

Temperature Sensor Digital, Local -55°C ~ 125°C 12 b TO-92-3 #commonpartslibrary #temperature #sensor #digital

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 1.5kHz 14-CLCC (6x6) General Description The ADXL355BEZ is a low noise, low drift, low power, three-axis MEMS accelerometer intended for high-precision sensing applications. It delivers high-resolution digital acceleration data with excellent long-term stability and minimal temperature-induced variation. The device integrates a complete sensing chain, including the MEMS sensor element, analog conditioning, analog-to-digital conversion, and digital filtering. Output data is provided through SPI or I²C interfaces, enabling straightforward integration into embedded and industrial systems. Key Features Three-axis acceleration sensing (X, Y, Z) Selectable full-scale ranges: ±2 g, ±4 g, ±8 g Low noise density (~25 µg/√Hz) Low offset and minimal temperature drift High-resolution 20-bit digital output Integrated digital filtering SPI and I²C communication interfaces Low power consumption (~200 µA typical) Wide supply voltage range (2.25 V to 3.6 V) Integrated temperature sensor Hermetically sealed package Applications Structural health monitoring Vibration measurement and analysis Tilt and inclination sensing Industrial condition monitoring Navigation and inertial systems Seismic detection Robotics and stabilization platforms Functional Description The ADXL355BEZ includes an integrated sensing and processing architecture composed of: Three-axis MEMS sensing element Analog front-end signal conditioning High-resolution ADC Digital filtering and decimation stages Temperature sensing element Digital communication interface (SPI/I²C) Configuration and control registers Electrical Characteristics (Typical) Supply voltage: 2.25 V to 3.6 V Supply current: ~200 µA Output data rate: up to 4 kHz Noise density: ~25 µg/√Hz Resolution: 20-bit Interface: SPI / I²C Mechanical and Package Information Package type: LGA (Land Grid Array) Approximate dimensions: 3 mm × 5 mm × 1 mm Hermetically sealed for improved environmental robustness Interface and Communication Supports SPI (4-wire) and I²C protocols Outputs 20-bit acceleration data per axis Data format: two’s complement Measurement Ranges ±2 g ±4 g ±8 g Environmental Specifications Operating temperature range: -40°C to +125°C Storage temperature range: -55°C to +150°C Power Management Supports measurement and standby modes Designed for low-power operation in continuous sensing applications Compliance and Reliability Industrial-grade device Designed for long-term stability RoHS compliant #commonpartslibrary #sensor #accelerometer

Enclosed AC DC Converters 1 Uitgang 12V - - - 1.8A 85 ~ 264 VAC, 120 ~ 370 VDC Input The IRM-20-12 is a compact enclosed AC-DC power supply module from MEAN WELL’s IRM-20 series. It is designed to convert a wide-range AC input into a stable 12V DC output, delivering reliable power for embedded systems, industrial electronics, and general-purpose PCB-mounted applications. It is a board-mount (through-hole) module with an encapsulated design, making it suitable for space-constrained and high-reliability environments. Key Features AC-DC Converter Module Converts AC mains to regulated 12V DC output Power Rating Up to 20–22W output power Output Capability 12V DC / 1.8A max current Universal Input Range 85–264 VAC (wide input compatibility) High Efficiency Around ~84% typical efficiency Compact Enclosed Design Fully encapsulated plastic case for protection and durability Through-Hole PCB Mount Designed for direct soldering onto PCB boards Low No-Load Power Consumption <0.1W standby consumption Built-in Protection Functions Overload protection Short circuit protection Overvoltage protection Wide Operating Temperature Typically -30°C to +70°C Safety Certifications UL, CE, TUV, CB approved (varies by region) EMI Compliance Designed to meet Class B EMI standards (with internal filtering) Typical Applications Industrial automation systems Factory equipment Embedded electronics IoT devices LED lighting systems Small control boards and instrumentation #CommonPartsLibrary #powersupply #ACDCconverter

RP2040 chip for Raspberry Pi Pico - ARM® Cortex®-M0+ MCU 32-Bit The RP2040 is a high-performance, low-cost microcontroller built around two ARM Cortex-M0+ cores. It is optimized for flexibility, ease of use, and deterministic real-time performance. Unlike many microcontrollers, it includes a unique programmable I/O subsystem (PIO), allowing custom hardware interfaces without extra components. Key Features Processing Dual-core ARM Cortex-M0+ processors Up to 133 MHz clock speed Efficient integer performance with low power consumption Memory 264 KB on-chip SRAM External QSPI flash support (typically 2 MB–16 MB depending on board) Programmable I/O (PIO) 2 PIO blocks, each with 4 state machines Enables custom protocols (e.g., SPI, I2C, UART, WS2812, VGA, etc.) Offloads timing-critical tasks from CPU 🔗 Connectivity Interfaces 2× UART 2× SPI 2× I2C USB 1.1 controller (device or host support) 16× PWM channels Analog Features 12-bit ADC (up to 5 channels, including internal temperature sensor) Power & Voltage Operating voltage: 1.8V – 3.3V Low-power modes available Package Options QFN-56 (7×7 mm) Development Ecosystem Supports C/C++ SDK MicroPython and CircuitPython support Strong community and documentation Typical Applications Embedded systems and IoT devices Robotics and automation DIY electronics and prototyping USB devices (HID, MIDI, etc.) Custom communication interfaces using PIO #CommonPartsLibrary #IntegratedCircuit #Microcontroller

MAX98357A Series 5.5V 3.2W PCM Input Class D Audio Power Amplifier - TQFN-16 The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range. ● Single-Supply Operation (2.5V to 5.5V) ● 3.2W Output Power into 4Ω at 5V ● 2.4mA Quiescent Current ● 92% Efficiency (RL = 8Ω, POUT = 1W) ● 22.8μVRMS Output Noise (AV = 15dB) ● Low 0.013% THD+N at 1kHz ● No MCLK Required ● Sample Rates of 8kHz to 96kHz ● Supports Left, Right, or (Left/2 + Right/2) Output ● Sophisticated Edge Rate Control Enables Filterless Class D Outputs ● 77dB PSRR at 1kHz ● Low RF Susceptibility Rejects TDMA Noise from GSM Radios ● Extensive Click-and-Pop Reduction Circuitry ● Robust Short-Circuit and Thermal Protection ● Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN ● Solution Size with Single Bypass Capacitor is 4.32mm2 Applications ● Single Li-ion Cell/5V Devices ● Smart Speakers ● Notebook Computers ● IoT Devices ● Gaming Devices (Audio and Haptics) ● Smartphones ● Tablets ● Cameras #commonpartslibrary #integratedcircuit #linearamplifier #mono

Temperature Sensor Digital, Local -40°C ~ 125°C 10 b 8-MSOP The MCP9808T-E/MS is a high-accuracy digital temperature sensor developed by Microchip Technology for precision thermal monitoring applications. The device communicates through a standard I²C-compatible serial interface and is optimized for low-power embedded systems requiring accurate ambient temperature measurement. It integrates internal temperature sensing, analog-to-digital conversion, programmable alert functionality, and configurable power management within a compact MSOP package. The sensor is designed for applications including industrial monitoring, consumer electronics, IoT devices, thermal management systems, medical instrumentation, and battery-powered portable equipment. Its low operating current and shutdown capability make it suitable for energy-efficient systems where thermal accuracy and minimal power consumption are critical. The device supports programmable temperature limits and interrupt generation for over-temperature events, enabling autonomous thermal supervision without continuous host processor intervention. The MCP9808T-E/MS maintains high measurement accuracy across a wide operating temperature range and offers stable digital output without requiring external calibration components. Electrical Characteristics Supply voltage operation supports low-voltage and standard logic systems. Low operating current enables efficient continuous monitoring. Shutdown mode significantly reduces power consumption during inactive periods. Digital I²C interface supports standard and fast communication modes. Integrated temperature conversion engine provides direct digital temperature output. Temperature Sensing Features High-accuracy ambient temperature measurement. Wide operating temperature range suitable for industrial environments. Programmable resolution for balancing conversion speed and precision. Configurable upper, lower, and critical temperature alert thresholds. Integrated hysteresis control for stable thermal event detection. Communication Interface I²C-compatible serial communication interface. Configurable slave addressing for multi-device bus operation. Supports read and write access to internal configuration registers. Compatible with common microcontrollers and embedded processors. Functional Features Integrated alert output for thermal event signaling. Programmable interrupt and comparator operating modes. Internal registers support temperature monitoring and device configuration. Power-on reset circuitry ensures predictable startup behavior. Device identification registers support system-level verification. Mechanical Characteristics Package type is MSOP with compact surface-mount footprint. Suitable for automated PCB assembly processes. RoHS-compliant and lead-free manufacturing. Typical Applications Industrial temperature monitoring systems. Portable battery-powered electronics. Embedded microcontroller systems. Thermal protection and supervision circuits. Consumer and IoT sensing devices. Medical and laboratory instrumentation. #CommonPartsLibrary #Sensor #Transducer #Temperature-Sensor #MCP9808