12V 30A Normal Open:1A(SPST-Normal Open) 4 Plugin,27.6x32mm Power Relays ROHS #commonpartslibrary #relay

AgCdO 5V 40A Normal Open:1A(SPST-Normal Open) 5 Plugin,27x31.8mm Power Relays ROHS #CommonPartsLibrary #Relay

Battery Holder (Open) AA 2 Cell PC Pin #AAA #battery #LR6

Voltage Level Translator Bidirectional 1 Circuit 8 Channel 60Mbps 20-TSSOP This device is an 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4V and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65V and 5.5V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state. To put the device in the Hi-Z state during power-up or power-down periods, tie OE to GND through a pulldown resistor. The current-sourcing capability of the driver determines the minimum value of the resistor. • No direction-control signal needed • Maximum data rates: – 110Mbps (push pull) – 1.2Mbps (open drain) • 1.4V to 3.6V on A port and 1.65V to 5.5V on B port (VCCA ≤ VCCB) • No power-supply sequencing required – either VCCA or VCCB can be ramped first • Latch-up performance exceeds 100mA per JESD 78, class II • ESD protection exceeds JESD 22 (A port): – 2000 V Human Body Model (A114-B) – 150 V Machine Model (A115-A) – 1000 V Charged-Device Model (C101) • IEC 61000-4-2 ESD (B-port): – ± 8kV Contact Discharge – ± 6kV Air Discharge #commonpartslibrary #integratedcircuit #logic #translator #levelshifter

MOSFET Output Solid-State Relay (PhotoMOS® Relay) – Single-pole normally open (1 Form A) solid-state relay with a MOSFET output for low-level signal switching and isolation. Provides 3750 Vrms input-to-output isolation, supports 60 V maximum load voltage, 0.4 A continuous load current, and 2.5 Ω maximum on-state resistance. Features an LED input with 3 mA maximum operate current, 1 ms maximum turn-on/turn-off time, 100 pF typical output capacitance, and is housed in a 4-pin SOP surface-mount package. Operates over a −40°C to +85°C temperature range. #Aratas #G3VM201AY1 #SolidStateRelay #PhotoMOS #MOSFETRelay #SSR #OpticallyIsolatedRelay #SignalSwitch #1FormA #SOP4 #SurfaceMount #EmbeddedSystems

Digital Switch Omnipolar Switch Open Drain Hall Effect 3-SIP #commonpartslibrary #sensor #Magneticsensor #integratedcircuit

2 (1 x 2) Position Shunt Connector Black Open Top 0.100" (2.54mm) Gold #commonpartslibrary #connector #jumper

UART, Single wire input, Output 40mA, Open Collector or Push Pull, PDIP-20 serial to parallel DIP*W7.62mm*

Battery Holder (Open) Coin, 20.0mm 2 Cell PC Pin #Battery-Holder #Clip #Contact #BH800

Current Sensor 10A 1 Channel Hall Effect, Open Loop Unidirectional 8-SOIC (0.154", 3.90mm Width) #commonpartslibrary #sensor #currentsensor #hallsensor #integratedcircuit

Solid State Photo-Coupled Relay (Photorelay) SPST-NO (1 Form A) 4-SOP (0.179", 4.55mm) The G3VM-61VY3(TR05) is a single-pole, single-throw normally open (SPST-NO) solid-state relay that uses an LED input and MOSFET output to switch AC or DC loads without mechanical contacts. It provides fast, silent, and highly reliable switching in a very small surface-mount package. Key Characteristics Relay Type: Solid State Relay (Photorelay) Contact Form: SPST-NO (1 Form A) Output Type: MOSFET Load Voltage: Up to 60 V AC/DC Load Current: Up to 700 mA On-Resistance: ~2 Ω max Input Control: LED-driven (low current DC input) Isolation Voltage: ~3.75 kV (input to output) Package: SOP-4 surface-mount (compact form factor) Packaging Option: TR = Tape & Reel for automated assembly How It Works The input LED is energized with a small DC current. It activates an internal photo-coupler. This drives a pair of MOSFETs, turning the load ON or OFF. No mechanical movement → no arcing or contact wear. Key Advantages Silent operation (no clicking sound) Very long life (no mechanical parts) Fast switching speed Compact size for dense PCB layouts Low leakage and stable performance Typical Applications Semiconductor test equipment Industrial control systems Battery-powered devices Data acquisition systems Communication and measurement circuits General-purpose signal switching #CommonPartsLibrary #Relay #SSR #G3VM

Current Sensor 30A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width) #commonpartslibrary #current #sensor

Current Sensor 50A 1 Channel Open Loop Bidirectional Module Closed-loop Hall effect current sensor designed for isolated measurement of DC, AC, and pulsed currents. The LEM HOB 50-P provides a nominal primary current measurement range of ±50 A, with a 5 V supply voltage, voltage output interface, and galvanic isolation between primary and secondary circuits. It is designed for PCB mounting applications requiring accurate current sensing. #CurrentSensor #HallEffectSensor #LEM #ClosedLoopSensor #PowerElectronics #PCBComponent

Thermostat 115°C Active Low Open Drain SOT-23-5 #commonpartslibrary #sensor #Temperaturesensor #integratedcircuit

Logic Output Optoisolator 10MBd Open Drain 5300Vrms 2 Channel 15kV/µs CMTI 8-SMD #commonpartsLibrary #isolator