S-R Latch 4 Channel 1:1 IC Standard 16-SOIC #CommonPartsLibrary #IntegratedCircuit #Logic #Latches

Digital Switch Latch Open Collector Hall Effect PG-SSO-3-2 #Commonpartslibrary #Sensor #Magneticsensor #Switches #Solidstate #Transducers

General Purpose 5VDC SPDT Non Latching Through Hole Power Relays ROHS

General Purpose 5VDC SPDT Non Latching Through Hole Power Relays ROHS SPDT SRD Series Form C

Voltage Level Translator Bidirectional 1 Circuit 8 Channel 60Mbps 20-TSSOP This device is an 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4V and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65V and 5.5V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state. To put the device in the Hi-Z state during power-up or power-down periods, tie OE to GND through a pulldown resistor. The current-sourcing capability of the driver determines the minimum value of the resistor. • No direction-control signal needed • Maximum data rates: – 110Mbps (push pull) – 1.2Mbps (open drain) • 1.4V to 3.6V on A port and 1.65V to 5.5V on B port (VCCA ≤ VCCB) • No power-supply sequencing required – either VCCA or VCCB can be ramped first • Latch-up performance exceeds 100mA per JESD 78, class II • ESD protection exceeds JESD 22 (A port): – 2000 V Human Body Model (A114-B) – 150 V Machine Model (A115-A) – 1000 V Charged-Device Model (C101) • IEC 61000-4-2 ESD (B-port): – ± 8kV Contact Discharge – ± 6kV Air Discharge #commonpartslibrary #integratedcircuit #logic #translator #levelshifter

Projected Plunger LATCHING Straight DPDT PCPin White Plugin Push Switches ROHS

Latches SN74ALVCH162841DL SSOP-56_L18.4-W7.5-P0.64-LS10.3-BL LCSC Part Number: C2867333 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Latches SN74ABT16841DLR SSOP-56_L18.4-W7.5-P0.64-LS10.3-BL LCSC Part Number: C2877426 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Latches SN74ALVCH162260DLR SSOP-56_L18.4-W7.5-P0.64-LS10.3-BL LCSC Part Number: C1879835 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Latches SN74ABTH162260DLR SSOP-56_L18.4-W7.5-P0.64-LS10.3-BL LCSC Part Number: C2872547 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Latches SN74ALS259N PDIP-16_L19.3-W6.4-P2.54-LS7.9-BL LCSC Part Number: C2866675 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

35V 1.5A Stepper Motor Driver with Internal Current Sense and Latch-off #ultralibrarian

Latches CY74FCT16501ETPVC SSOP-56_L18.4-W7.5-P0.64-LS10.3-BL LCSC Part Number: C2956343 undefined Manufactured by CYPRESS(赛普拉斯)

4.5V~5.5V 1 1 5.5ns@5V,15pF 10uA SOT-23-5 Buffers, Drivers, Receivers, Transceivers RoHS The SN74AHCT1G125 device is a single bus buffer gate/line driver with 3-state output. The output is disabled when the output-enable (OE) input is high. When OE is low, data is passed from the A input to the Y output. • Operating Range of 4.5 V to 5.5 V • Max tpd of 6 ns at 5 V • Low Power Consumption, 10-µA Max ICC • ±8-mA Output Drive at 5 V • Inputs are TTL-Voltage Compatible • Latch-Up Performance Exceeds 250 mA Per JESD 17 2 Applications • Wireless Infrastructure • Servers • Power Infrastructure • PCs/Notebooks • Programmable Logic Controllers • Tests and Measurements #CommonPartsLibrary #IntegratedCircuit

2 Circuit IC Switch 2:1 10Ohm 10-UQFN (2.0x1.5) The TS5A23157 device is a dual single-pole doublethrow (SPDT) analog switch designed to operate from 1.65 V to 5.5 V. This device can handle both digital and analog signals. Signals up to 5.5 V (peak) can be transmitted in either direction. Features 1• Low ON-State Resistance (15 Ω at 125℃) • 125℃ Operation • Control Inputs are 5-V Tolerant • Specified Break-Before-Make Switching • Low Charge Injection • Excellent ON-Resistance Matching • Low Total Harmonic Distortion • 1.8-V to 5.5-V Single-Supply Operation • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II • ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C101) 2 Applications • Sample-and-Hold Circuits • Battery-Powered Equipment • Audio and Video Signal Routing • Communication Circuits #commonpartslibrary #integratedcircuit #circuitswitch #TexasInstruments #AnalogSwitch #SPDT #SignalRouting #Multiplexer #LowOnResistance #HighSpeedSwitching #UQFN #EmbeddedSystems #ElectronicsDesign

EEPROM Memory IC 256Kbit I2C 1 MHz 450 ns 8-SO The M24256E-FMN6TP is a 256-Kbit (32 Kbyte) I²C-compatible serial EEPROM from STMicroelectronics. It is designed for reliable, non-volatile data storage in a wide range of electronic applications including consumer, industrial, and automotive systems. The device supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C communication, enabling efficient data transfer. It features byte and page write operations, low power consumption, and a high endurance of write cycles, making it suitable for frequent data logging and configuration storage. Housed in a compact SO8 package, the device is optimized for space-constrained PCB designs while maintaining robust performance and data retention capabilities. Key Features Memory size: 256 Kbit (32 Kbyte) Interface: I²C (2-wire serial interface) Clock frequency: Standard mode: 100 kHz Fast mode: 400 kHz Fast-mode Plus: 1 MHz Supply voltage range: 1.7 V to 5.5 V Page write capability: up to 64 bytes Write cycle time: ~5 ms (typical) Data retention: > 200 years Endurance: > 4 million write cycles Hardware write protection available ESD protection and latch-up immunity Functional Description The device operates as a slave on the I²C bus and supports: Byte write and read Page write (up to 64 bytes) Random and sequential read operations Memory addressing is internally managed using a 16-bit address pointer, allowing access to the full 32 KB memory array. The device includes an internal write cycle controller, eliminating the need for external timing management. Pin Configuration (SO8 Package) A0, A1, A2: Device address inputs VSS: Ground SDA: Serial data line SCL: Serial clock line WC: Write control (hardware write protection) VCC: Supply voltage Absolute Maximum Ratings Supply voltage (VCC): -0.3 V to 6.5 V Input voltage: -0.3 V to VCC + 0.6 V Storage temperature: -65°C to +150°C Operating temperature (industrial grade): -40°C to +85°C Electrical Characteristics Low standby current: < 1 µA (typical) Operating current: < 1 mA Input/output compatible with CMOS logic levels Schmitt trigger inputs for noise immunity Timing Characteristics Write cycle time: 5 ms (typical) Fast-mode Plus support up to 1 MHz Sequential read supports continuous data streaming Package Information Package type: SO8 (8-lead Small Outline) Mounting: Surface-mount (SMD) Tape & reel packaging (TP suffix) Applications Configuration storage Calibration data storage Data logging systems Industrial control systems Consumer electronics Embedded systems requiring non-volatile memory Advantages High endurance and long data retention Wide voltage range (ideal for mixed-voltage systems) Compact footprint High-speed I²C compatibility (up to 1 MHz) #commonpartslibrary #integratedcircuit #memory