Gyroscope X (Pitch), Y (Roll), Z (Yaw) ±250, 500, 1000, 2000 27kHz I2C, SPI 16-LGA (3x3) #IMU #accelerometer #SPI #I2C #gyroscope

LVDS Digital Isolator 5700Vrms 4 Channel 2.5Gbps 40kV/µs CMTI 32-WFQFN Exposed Pad, CSP The ADN4624 is a quad-channel, signal isolated, low voltage differential signaling (LVDS) buffer that operates at up to 2.5 Gbps with very low jitter. The device integrates Analog Devices, Inc., iCoupler® technology, enhanced for high speed operation to provide drop-in galvanic isolation of LVDS signal chains. AC coupling and/or level shifting to the LVDS receivers and from the LVDS drivers allows isolation of other high speed signals such as current mode logic (CML). The ADN4624 includes a refresh mechanism to monitor the input and output states and ensure they remain the same in the absence of data transitions (for example, at power-on). For lower power consumption and high speed operation with low jitter, the LVDS and isolator circuits rely on 1.8 V supplies. The ADN4624 is fully specified over a wide industrial temperature range and is available in a 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance (for 5.7 kV rms or 8 kVPEAK surge and impulse voltages and reinforced insulation at ac mains voltages) or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance (for basic/functional isolation). FEATURES ► 5.7 kV rms and 1.5 kV rms LVDS isolators ► Complies with TIA/EIA-644-A LVDS signal levels ► Quad-channel configuration ► Any data rate up to 2.5 Gbps switching with low jitter ► 10 Gbps total bandwidth across four channels ► 2.15 ns typical propagation delay ► Typical jitter: 0.82 ps rms random, 40 ps total peak ► Lower power 1.8 V supplies ► ±8 kV IEC 61000-4-2 ESD protection across isolation barrier ► High common-mode transient immunity: 100 kV/μs typical ► Safety and regulatory approvals (28-lead SOIC_W_FP package) ► UL (pending): 5700 V rms for 1 minute per UL 1577 ► CSA Component Acceptance Notice 5A (pending) ► VDE certificate of conformity (pending) ► DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 ► VIORM = 849 VPEAK (working voltage) ► Enable or disable refresh (low speed output correctness check) ► Operating temperature range: −40°C to +125°C ► 28-lead, wide-body, finer pitch SOIC_W_FP package with 8.3 mm creepage and clearance or 6 mm × 6 mm LFCSP package with 1.27 mm creepage and clearance APPLICATIONS ► Isolated video and imaging data ► Analog front-end isolation ► Data plane isolation ► Isolated high speed clock and data links ► Multi-gigabit serialization/deserialization (SERDES) ► Board-to-board optical replacement (for example, short reach fiber) #CommonPartsLibrary #Isolator #ADN4624BCPZ #AnalogDevices #LVDS #DigitalIsolator #GalvanicIsolation #HighSpeedCommunication #SERDES

8 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold The TE Connectivity part 2386586-1 is a fine-pitch board-to-board (BTB) PCB receptacle connector designed for compact, high-density electronic devices. It is a vertical surface-mount connector with 8 positions and a 0.4 mm pitch, commonly used in portable electronics, embedded systems, and space-constrained PCB designs. Key Features Connector Type: PCB mount receptacle Connector System: Board-to-board (BTB) Positions: 8-pin Pitch: 0.4 mm fine pitch Rows: 2 Mounting Style: Surface mount (SMT) Orientation: Vertical Stack Height: 0.8 mm low-profile design Contact Plating: Gold (Au) Contact Material: Copper alloy Rated Current: 0.5 A max per contact Operating Voltage: 60 VDC Temperature Range: −40 °C to +85 °C Housing Material: High-temperature thermoplastic Application: Signal transmission in compact electronics Packaging: Tape & Reel for automated assembly This connector is optimized for: Compact embedded systems Wearables and handheld devices High-density PCB stacking Consumer electronics Low-profile modular designs

6-Position Vertical Through-Hole Male Pin Header – Single-row unshrouded PCB header designed for board-to-board interconnects, wire-to-board connections, industrial controls, embedded systems, instrumentation, development boards, and general-purpose electronic applications. The Samtec TSW-106-07-G-S is part of the TSW Series, featuring 6 male pins on a 2.54 mm (0.100") pitch with a vertical through-hole mounting configuration. It utilizes square phosphor bronze contacts with 10 µin (0.25 µm) gold plating on the mating area and 3 µin (0.076 µm) gold plating on the posts, providing excellent conductivity, corrosion resistance, and long-term reliability. The connector features a 5.84 mm mating pin length, 2.54 mm post length, 10.92 mm overall contact length, push-pull mating, and a UL94 V-0 rated black PBT insulator. It operates over a −55°C to +125°C temperature range, making it ideal for reliable embedded, industrial, and prototyping applications. #Samtec #TSW10607GS #TSWSeries #MaleHeader #PinHeader #ThroughHoleConnector #BoardToBoard #254mmPitch #IndustrialElectronics #EmbeddedSystems #PCBConnector

Connector Header Through Hole 10 position 0.224" (5.70mm) 172065-0010 is a Mega-Fit® vertical PCB header from Molex, designed for high-current wire-to-board power connections. It features a dual-row, 10-circuit, through-hole configuration with a 5.70 mm pitch, making it suitable for industrial equipment, power supplies, automotive electronics, and other applications requiring reliable, high-density power distribution. The connector incorporates a polarized, shrouded housing and locking mechanism to ensure secure mating and prevent incorrect insertion. Key Features 10-position (2×5) vertical PCB header 5.70 mm pitch Mega-Fit® connector system Through-hole mounting for strong mechanical retention Supports up to 23 A per circuit Rated up to 600 VAC/DC 0.38 µm (15 µin) gold-plated mating contacts Tin-plated PCB termination Shrouded and polarized design with positive locking Operating temperature: -40°C to +120°C UL 94 V-0 rated housing material Compatible with Molex Mega-Fit receptacle housings for wire-to-board power applications. #CommonPartsLibrary #Molex #MegaFit #PowerConnector #PCBHeader #WireToBoard #ThroughHole #HighCurrent #IndustrialElectronics #PowerDistribution #Connector

JST PH Connector Header Through Hole, Right Angle 4 position 0.079" (2.00mm) The S4B-PH-K-S(LF)(SN) is a 4-position, single-row, right-angle (side-entry) male header designed for 2.0 mm pitch wire-to-board connections. It is a through-hole mounted, shrouded connector that ensures reliable and secure mating with compatible PH series housings and crimp terminals. This connector is commonly used in consumer electronics, embedded systems, power supplies, and industrial control boards, especially where space-saving and dependable connections are required. Key Features Connector Type: Shrouded male header (wire-to-board) Number of Positions: 4 pins (single row) Pitch: 2.0 mm Orientation: Right-angle (side entry) Mounting Type: Through-hole (THT) Termination: Solder Electrical Characteristics Rated Voltage: 100 V Rated Current: 2 A per contact Insulation Resistance: ≥1000 MΩ Contact Resistance: Low (typically ≤10–20 mΩ) Mechanical & Material Contact Material: Brass / phosphor bronze with tin plating Housing Material: PA66 (Nylon), UL94 V-0 flame rated Locking Mechanism: Detent lock for secure mating Shrouded Design: Prevents misalignment and protects pins Environmental Operating Temperature: −25 °C to +85 °C #CommonPartsLibrary #Connector #Header #JSTPH #MalePins #RightAngle #4pos

Molex SL series right-angle PCB header with latch and split pegs, 2.54mm (0.100") pitch wire-to-board connector, available in 2 to 25 circuit positions, through-hole mounting, 0.64mm square pins, glass-filled polyester UL94V-0 housing, phosphor bronze terminals, positive locking latch for secure cable retention, designed for reliable signal and power connections in industrial, consumer, automotive and embedded electronic applications. Molex 70551-0003 Molex SL header, Molex SL series connector, Molex 70400, Molex 70430, right angle header with latch, split peg header, 2.54mm wire to board connector, 0.100 inch header, Molex SL right angle header, locking PCB header, through hole connector, phosphor bronze header, Molex wire to board system Hashtags: #MolexSL #MolexConnector #SLSeries #WireToBoardConnector #RightAngleHeader #LockingHeader #SplitPegHeader #254mmPitch #100MilConnector #ThroughHoleConnector #PCBHeader #PhosphorBronzeContacts #IndustrialConnector #EmbeddedHardware #Molex70400 #Molex704302.54mm Pitch SL Header, Single Row, Right Angle, 3.05mm Pocket, Shrouded, with Beveled Plastic Peg, 4 Circuits, Tin (Sn) Plating

PCB Terminal Block for screw connection with tension sleeve, featuring 2 positions on a 5.08 mm pitch. It has a nominal current rating of 17.5 A, nominal voltage of 400 V, 1.5 mm² nominal conductor cross-section, and is designed for wave-soldering PCB mounting with a 0° conductor/PCB connection direction. #PCBTerminalBlock #PhoenixContact #ScrewTerminal #5_08mmPitch

Connector Header Through Hole 5 position 0.100" (2.54mm) SWD header 1x5 2.54mm PinHeader 1x05 2.54mm horizontal The TSW-105-07-G-S is a high-reliability, through-hole, single-row pin header from Samtec’s TSW series. It is designed for board-to-board or wire-to-board interconnections in a wide range of electronic applications. Featuring a standard 2.54 mm pitch and gold-plated contacts, this connector ensures reliable electrical performance, durability, and compatibility with industry-standard mating components. Mechanical Characteristics Connector Type: Pin Header Mounting Type: Through-Hole Number of Positions: 5 Number of Rows: Single Row Pitch: 2.54 mm Orientation: Vertical Termination Style: Solder Contact Shape: Square Post Material and Plating Contact Material: Phosphor Bronze Contact Plating: Gold over Nickel Housing Material: Black Thermoplastic (UL94 V-0 rated) Electrical Characteristics Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for reliable signal transmission Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -55°C to +125°C Flammability Rating: UL94 V-0 Applications Board-to-board connections Wire-to-board interfaces Prototyping and development systems Industrial and consumer electronics Compliance and Standards RoHS Compliant Lead-Free #CommonPartsLibrary #Connector #Header #TSW

Resistor Axial DIN0204 series, Horizontal, Pitch = 5.08mm, 0.167W, Length = 3.6mm Diameter = 1.6mm #generic-part-template #axial