PCB spring terminal block for wire-to-board connections, featuring a 2-position, 3.5 mm pitch interface with a 45° wire entry and push-in spring connection. It is rated for up to 10 A and 320 V (IEC), accepts 0.2–1.5 mm² (22–16 AWG) conductors, supports PCB through-hole soldering, and operates over a −40°C to +105°C temperature range. #commonpartslibrary #connector #terminalblock #tht

Miniature SPST Through-Hole Slide Switch – Single-Pole Single-Throw (SPST) slide switch designed for industrial controls, consumer electronics, instrumentation, embedded systems, communication equipment, power supplies, and general-purpose PCB switching applications. The C&K L101011MS02Q is part of the L Series, featuring an ON–OFF switching function with a through-hole PCB mount and a standard 5.08 mm actuator. Rated for 4 A (AC/DC), 125 VAC, and 28 VDC, it utilizes silver-plated copper contacts to provide reliable electrical performance and low contact resistance. The switch includes PC pin terminals, 3.81 mm actuator travel, and a polyamide (PA66/Nylon 6/6) actuator, making it suitable for durable, repetitive switching applications. Designed for operation over a −30°C to +65°C temperature range and offering an electrical life of 10,000 cycles, it is ideal for compact embedded and industrial control designs. #CK #L101011MS02Q #SlideSwitch #SPST #ThroughHoleSwitch #OnOffSwitch #PCBSwitch #IndustrialElectronics #EmbeddedSystems #ControlSwitch #ConsumerElectronics #Instrumentation

Telecom Relay DPDT (2 Form C) Through Hole The G6K-2P-Y DC5 is a compact, ultra-miniature signal relay designed for high-density PCB mounting applications. Manufactured by Omron, this relay features a DPDT (2 Form C) contact configuration and operates with a 5 VDC coil. It is optimized for switching low-level signals and is commonly used in telecommunications, test and measurement equipment, and consumer electronics where space-saving and high reliability are critical. Key Features Ultra-miniature, low-profile design for high-density mounting DPDT (2 Form C) contact configuration High sensitivity coil (low power consumption) Gold-clad contacts for low-level signal switching High reliability and long mechanical life Fully sealed construction (flux protection) Suitable for surface-mount and through-hole variants (depending on suffix) Electrical Characteristics Coil Specifications Rated Coil Voltage: 5 VDC Coil Resistance: ~125 Ω Coil Current: ~40 mA Power Consumption: ~200 mW Must Operate Voltage: ≤ 75% of rated voltage Must Release Voltage: ≥ 10% of rated voltage Contact Specifications Contact Configuration: DPDT (2 Form C) Contact Material: Gold-clad silver alloy Contact Rating: 1 A at 30 VDC 0.5 A at 125 VAC Maximum Switching Voltage: 125 VAC / 60 VDC Maximum Switching Current: 1 A Maximum Switching Power: 30 W (DC) 62.5 VA (AC) Timing Characteristics Operate Time: ≤ 3 ms Release Time: ≤ 3 ms Insulation Characteristics Insulation Resistance: ≥ 1,000 MΩ (at 500 VDC) Dielectric Strength: Between Coil and Contacts: 1,000 VAC (1 min) Between Open Contacts: 500 VAC (1 min) Mechanical Characteristics Mounting Type: Through-hole (Y variant, PCB terminal) Weight: ~1 g Enclosure: Sealed (flux-resistant) Environmental Specifications Operating Temperature Range: -40°C to +70°C Storage Temperature Range: -40°C to +85°C Vibration Resistance: 10 to 55 Hz, 1.5 mm double amplitude Shock Resistance: 1,000 m/s² Life Expectancy Mechanical Life: ≥ 100 million operations Electrical Life: ≥ 100,000 operations (at rated load) Applications Telecommunications equipment Test and measurement instruments Audio signal routing Industrial control systems Consumer electronics Package Information Manufacturer: Omron Electronics Series: G6K Part Number: G6K-2P-Y DC5 #commonpartslibrary #relay

10 kOhms 0.5W, 1/2W PC Pins Through Hole Trimmer Potentiometer Cermet 1.0 Turn Top Adjustment #CommonPartsLibrary #TrimmerPotentiometers #ThroughHole #3386P

10 µF 50 V Aluminum Electrolytic Capacitors Radial, Can 2000 Hrs @ 85°C #CommonPartsLibrary #Capacitors #AluminumElectrolyticCapacitors #ThroughHole

2.2 µF 50 V Aluminum Electrolytic Capacitors Radial, Can 2000 Hrs @ 85°C #CommonPartsLibrary #Capacitors #AluminumElectrolyticCapacitors #ThroughHole

6-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for industrial controls, consumer electronics, appliances, power supplies, embedded systems, instrumentation, and general-purpose wire-to-board interconnect applications. The TE Connectivity 640456-6 is part of the MTA-100 Series, featuring 6 positions on a 2.54 mm (0.100") pitch with a through-hole vertical PCB mount. It utilizes square copper alloy contacts with tin plating, a single-wall polarized shroud, and a friction-lock mating system to ensure secure cable retention and proper orientation during assembly. Rated for 250 VAC (current rating depends on the mating wire gauge), it is constructed with a UL94 V-0 thermoplastic housing for durability and flame resistance. The connector operates over a −55°C to +105°C temperature range and is ideal for reliable board-to-wire connections in embedded and industrial electronic designs. #TEConnectivity #6404566 #MTA100 #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #254mmPitch #IndustrialElectronics #EmbeddedSystems #BoardToWire #Connector

USB Type-C USB 2.0 Receptacle Connector – Right-angle USB Type-C receptacle designed for consumer electronics, industrial controllers, IoT devices, embedded systems, charging equipment, portable products, and USB-enabled communication interfaces. The Same Sky (formerly CUI Devices) UJ20-C-H-G-SMT-2-P16-TR features a 24-contact (16 active + 8 dummy) USB Type-C interface supporting USB 2.0 data rates up to 480 Mbps. It is rated for 48 VDC, with 5 A on VBUS power contacts, 1.25 A on VCONN contacts, and 0.25 A on signal contacts. Designed with a surface-mount, right-angle configuration plus through-hole retention tabs, it provides enhanced mechanical strength for repeated cable insertion. Features include gold-plated contacts, shielded steel shell (SUS304), UL94 V-0 housing, 10,000 mating cycles, and an operating temperature range of −25°C to +85°C, making it ideal for reliable power and data connectivity in compact embedded designs. #SameSky #UJ20CHGSMT2P16TR #USBTypeC #USB20 #USBConnector #TypeCReceptacle #BoardToCable #SurfaceMountConnector #EmbeddedSystems #IndustrialElectronics #IoT #ConsumerElectronics

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

Connector Header Through Hole, Right Angle 3 position 0.100" (2.54mm) Pin header connector for board-to-board interconnection, featuring a 3-position, single-row, right-angle through-hole configuration with a 2.54 mm pitch. It is rated for 250 V and 3 A, uses gold-plated contacts, and is specified for an operating temperature range of −40 °C to +105 °C. #PinHeader #BoardToBoard #Connector #ThroughHole #RightAngle #2.54mmPitch #3Pin #250V #3A #WurthElektronik #WRPHD

2-Position Horizontal Through-Hole Terminal Block – Single-level wire-to-board terminal block designed for industrial automation, power supplies, control systems, instrumentation, HVAC equipment, embedded electronics, and general-purpose PCB power connections. The Würth Elektronik 691137710002 is part of the WR-TBL Series 1377, featuring 2 positions on a 5.00 mm pitch with a horizontal (side-entry) wire orientation and through-hole PCB mounting. It utilizes a screw clamp with leaf spring and wire guard for secure wire retention, supporting 12–30 AWG conductors. Rated for 16 A and 300 V, it is constructed with nickel-plated copper alloy contacts, a zinc-plated M2.5 screw, and a polycarbonate (PC) housing. The terminal block has a recommended tightening torque of 0.4 Nm (3.5 lb-in) and operates over a −30°C to +120°C temperature range, making it suitable for reliable industrial and embedded power interconnections. #WurthElektronik #691137710002 #WRTBL1377 #TerminalBlock #WireToBoard #ScrewTerminal #ThroughHoleConnector #IndustrialAutomation #PowerSupply #EmbeddedSystems #PCBConnector #ControlSystems

3-Position Vertical Wire-to-Board PCB Header – Single-row shrouded male header designed for consumer electronics, industrial controls, embedded systems, home appliances, IoT devices, instrumentation, and general-purpose wire-to-board interconnect applications. The JST B3B-PH-K-S is part of the PH Series, featuring 3 positions on a 2.00 mm (0.079") pitch with a through-hole vertical PCB mount. It utilizes brass square pins with tin plating, a 4-wall polarized shroud, and a detent locking mechanism for secure mating with compatible PH series crimp housings. Rated for 2 A and 100 V, it is constructed with a UL94 V-0 rated PA66 (Nylon 6/6) housing, providing reliable electrical and mechanical performance. The connector supports press-fit and solder termination, operates over a −25°C to +85°C temperature range, and is ideal for compact embedded and industrial board-to-wire applications. #JST #B3BPHKS #PHSeries #WireToBoard #PCBHeader #MaleHeader #ThroughHoleConnector #2mmPitch #BoardToCable #IndustrialElectronics #EmbeddedSystems #Connector

100 Ohms ±5% 2W Through Hole Resistor Axial Flame Proof, Fusible, Safety Wirewound #CommonPartLibrary #ThroughHole #Resistor #Axial #FKN

Fuse Holder 32V 1 Circuit Blade Through Hole The 178.6764.0001 is an automotive blade fuse holder from Littelfuse, part of the MINI® FL1 series, designed for direct PCB mounting (through-hole). It allows easy integration of a single MINI blade fuse into a printed circuit board for overcurrent protection. This component is commonly used in automotive electronics, industrial control systems, and embedded power circuits, where compact and reliable fuse protection is required. Key Features Fuse Type Compatibility Supports MINI® automotive blade fuses (ATM/APM type) PCB Mount (Through-Hole) Designed for direct soldering to PCB for strong mechanical support Current Capability Up to 30 A maximum ~22 A continuous rating Voltage Rating Up to 58 VDC (automotive systems) Single Fuse Position Holds 1 fuse per holder Thermoplastic Housing Heat-resistant black body UL94 V-0 flammability rating for safety Contact Material Tin-plated copper alloy terminals for reliable conductivity Standard PCB Pitch Approx. 7.62 mm pin spacing Modular Design Multiple holders can be mounted side-by-side for multi-channel protection blade fuse holder automotive PCB #Circuit-Protection #Fuseholders #FL1

Automotive Blade Fuses Holder through-hole mounting, 500V, 15A to 30A, -40C to 125C #holder

100µF 63V Aluminum Electrolytic Capacitors Radial, Can 2000 Hrs @ 85°C #CommonPartsLibrary #Polarized-Capacitor #Through-Hole #WCAP-ATG5

Enclosed AC DC Converters 1 Uitgang 12V - - - 1.8A 85 ~ 264 VAC, 120 ~ 370 VDC Input The IRM-20-12 is a compact enclosed AC-DC power supply module from MEAN WELL’s IRM-20 series. It is designed to convert a wide-range AC input into a stable 12V DC output, delivering reliable power for embedded systems, industrial electronics, and general-purpose PCB-mounted applications. It is a board-mount (through-hole) module with an encapsulated design, making it suitable for space-constrained and high-reliability environments. Key Features AC-DC Converter Module Converts AC mains to regulated 12V DC output Power Rating Up to 20–22W output power Output Capability 12V DC / 1.8A max current Universal Input Range 85–264 VAC (wide input compatibility) High Efficiency Around ~84% typical efficiency Compact Enclosed Design Fully encapsulated plastic case for protection and durability Through-Hole PCB Mount Designed for direct soldering onto PCB boards Low No-Load Power Consumption <0.1W standby consumption Built-in Protection Functions Overload protection Short circuit protection Overvoltage protection Wide Operating Temperature Typically -30°C to +70°C Safety Certifications UL, CE, TUV, CB approved (varies by region) EMI Compliance Designed to meet Class B EMI standards (with internal filtering) Typical Applications Industrial automation systems Factory equipment Embedded electronics IoT devices LED lighting systems Small control boards and instrumentation #CommonPartsLibrary #powersupply #ACDCconverter

Connector Header Through Hole 12 position 0.100" (2.54mm) The TSW-106-07-F-D is a double-row, through-hole vertical header from Samtec’s TSW series, designed for board-to-board or wire-to-board interconnections. It features a standard 2.54 mm pitch with 12 total contacts arranged in two rows of six positions. This connector is commonly used in prototyping, embedded systems, and general-purpose PCB applications where reliable and cost-effective interconnect solutions are required. Applications PCB prototyping Embedded systems Mezzanine board connections Development boards General-purpose interconnects Mating Compatibility Compatible with standard 2.54 mm pitch female headers and sockets Works with IDC connectors and jumper wires #commonpartslibrary #connector #header

N-Channel 55V 80A (Tc) 300W (Tc) Through Hole TO-220 #CommonPartsLibrary #Transistor #N-Channel #Mosfet #Transistor #ThroughHole

Connector Header Through Hole 18 position 0.100" (2.54mm) # TSW-118-07-G-S ## General Description The TSW-118-07-G-S is a through-hole board-to-board and wire-to-board interconnect header manufactured by Samtec. It belongs to the TSW series of standard terminal strip headers designed for reliable signal transmission in electronic assemblies, embedded systems, industrial controls, telecommunications equipment, instrumentation, and general-purpose printed circuit board applications. The component features precision-machined contacts, robust mechanical construction, and compatibility with a wide range of mating connectors. Its design supports secure electrical connections while maintaining excellent durability during repeated mating cycles and long-term operation in demanding environments. ## Key Features ### Mechanical Characteristics * Through-hole mounting configuration * Single-row terminal strip header design * Straight vertical orientation * Precision-machined contact system * High-reliability board-level interconnection ### Contact System * Gold-plated contact surface * Enhanced conductivity and signal integrity * Corrosion-resistant contact finish * Suitable for repeated insertion and removal cycles ### Electrical Characteristics * Low contact resistance * Reliable signal transmission * Suitable for low-power and signal-level applications * Stable electrical performance across operating conditions ### Material Construction * High-temperature thermoplastic insulator * Durable metallic contact structure * RoHS-compliant materials * Lead-free manufacturing compatibility ### Environmental Characteristics * Industrial-grade operating capability * Resistant to mechanical wear during mating cycles * Suitable for automated and manual assembly processes ### Application Areas * Embedded Systems * Microcontroller Development Boards * Industrial Automation Equipment * Telecommunications Hardware * Test and Measurement Instruments * Medical Electronics * Data Acquisition Systems * Prototyping Platforms * Consumer Electronic Devices * PCB Interconnection Applications ### Compliance * RoHS Compliant * Lead-Free Compatible * Industry-standard connector footprint ## Manufacturer Samtec Inc. ## Product Family TSW Series Terminal Strip Headers #Samtec #TSW11807GS #TerminalStripHeader #PCBConnector #BoardToBoardConnector #WireToBoardConnector #ElectronicsComponents #EmbeddedSystems #IndustrialElectronics #InterconnectSolutions #ThroughHoleConnector #ElectronicDesign #HardwareEngineering #PCBAssembly #CommonPartsLibrary #Connector #Header #TSW pin header 1x18 2.54mm