RF Transmitter FSK, OOK 27MHz ~ 960MHz 10dBm 100kBaud PCB, Surface Mount Antenna 10-TFSOP, 10-MSOP (0.118", 3.00mm Width) #CommonPartsLibrary #IntegratedCircuit #RF-Transmitter #EZRadio #SI4010

Ultrasonic Sensor 42kHz #CommonPartsLibrary #Sensor #Transducer #Ultrasonic-receiver #Transmitter

1 Coil, 2 Layer 24µH Wireless Charging Coil Transmitter 100mOhm Max #Commonpartslibrary #inductor #coil #wirelesscharging

PT2272-M4 is a CMOS remote control decoder IC designed to work with the PT2262 encoder for wireless RF and infrared remote control applications. It decodes incoming encoded signals and provides four momentary data outputs, making it ideal for remote switching, security systems, garage door openers, home automation, and industrial control systems. The "M4" variant features 4 momentary output channels, where outputs remain active only while the corresponding transmitter button is pressed. Key Features CMOS technology for low power consumption 4 momentary data output channels (M4 version) Up to 12 tri-state address pins for secure coding Supports up to 531,441 unique address combinations High noise immunity for reliable operation Wide operating voltage range: 4V to 15V Single-resistor oscillator design Compatible with PT2262 encoder IC Available in DIP and SOP package options Suitable for RF and infrared remote control systems Applications Wireless remote controls Garage door openers Car security systems Home automation equipment Remote-controlled fans and appliances Industrial wireless control systems Remote-controlled toys #CommonPartsLibrary #IntegratedCircuit #PT2272M4 #RemoteControlDecoder #RFDecoder #WirelessControl #HomeAutomation #SecuritySystem #GarageDoorOpener #CMOSIC #PT2262 #IndustrialControl #EmbeddedSystems #ElectronicsDesign

1 Coil, 2 Layer, Bifilar 6.3µH Wireless Charging Coil Transmitter 24mOhm Max #CommonPartsLibrary #inductor #Coil #Charging-coil #WE-WPCC

Fiber Optic Transmitter 645nm 2V 30 mA Connector-less #CommonPartsLibrary #Optoelectronic #Fiber-Optic #Transmitters - Discrete #IF-E96

RF Transmitter FSK, OOK 27MHz ~ 960MHz 10dBm 100kBaud PCB, Surface Mount Antenna 14-SOIC (0.154", 3.90mm Width) #commonpartslibrary #integratedcircuit #rf #wireless

RF Transmitter ASK, FSK, GFSK, OOK 75MHz ~ 1GHz -16dBm ~ 14dBm 179.2kbps PCB, Surface Mount Antenna 24-TSSOP (0.173", 4.40mm Width) #CommonPartsLibrary #IntegratedCircuit #RF #RF-transmitter #ADF7012

Fiber Optic Transmitter 950nm 1.5V 50 mA Connector-less #CommonPartsLibrary #Optoelectronics #Fiber Optic Transmitter #IF-E91

RF IC Synthesizer, VCO VSAT 7.3GHz ~ 14.6GHz SPI Interface 48-LGA (7x7) The ADF5611 allows implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and an external reference source. The wideband microwave voltage controlled oscillator (VCO) design permits frequency operation from 7300MHz to 14,600MHz at a single RF output. A series of frequency dividers with a differential frequency output allows operation from 57MHz to 14,600MHz. Analog and digital power supplies for the PLL circuitry range from 3.15V to 3.45V, and the VCO supplies are between 4.75V and 5.25V. The ADF5611 has an integrated VCO with a fundamental frequency of 3650MHz to 7300MHz. These frequencies are internally doubled and routed to the RFOUT pin. An additional differential output allows the doubled VCO frequency to be divided by 1, 2, 4, 8, 16, 32, 64, or 128, allowing the user to generate RF output frequencies as low as 57MHz. A simple 3- or 4-wire serial port interface (SPI) provides control of all on-chip registers. To conserve power, this divider block can be disabled when not needed through the SPI. Likewise, the output power for both the single-ended output and the differential output are programmable. The integrated phase detector and Δ-Σ modulator, capable of operating at up to 100MHz, permit wide loop bandwidths and fast frequency tuning with a typical spurious level of −105dBc. With a VCO open-loop phase noise at an 100kHz offset from −115dBc/Hz at a 7.3GHz RFOUT to −109dBc/Hz at a 14.6GHz RFOUT, the ADF5611 is equipped to minimize blocker effects and to improve receiver sensitivity and transmitter spectral purity. The low phase noise floor eliminates any contribution to modulator and mixer noise floor in transmitter applications. ► RFOUT frequency range: 7300MHz to 14,600MHz ► PDIV_OUT and NDIV_OUT frequency range: 57MHz to 14,600MHz ► Fractional-N synthesizer and integer-N synthesizer modes ► Typical PFD spurious: <−105dBc ► Integrated RMS jitter at 1kHz to 100MHz integration bandwidth: <40fs ► Normalized inband phase noise floor FOM ► Integer mode: −232dBc/Hz ► Fractional mode: −229dBc/Hz ► Maintains frequency lock over −40°C to +85°C (lock and leave) ► Low phase noise VCO ► −115dBc/Hz typical at 100kHz (7.3GHz) ► −114dBc/Hz typical at 100kHz (10GHz) ► −109dBc/Hz typical at 100kHz (14.6GHz) ► RFOUT power (typical): 6dBm ► Programmable divide by 1, 2, 4, 8, 16, 32, 64, or 128 output ► Programmable output power level ► Typical power dissipation: 1W ► 48-terminal, 7 mm × 7 mm LGA package: 49 mm2 #ADF5611BCCZ #ADF5611 #FrequencySynthesizer #PLL #MicrowaveSynthesizer #RFIC #LowPhaseNoise #VCO #WirelessInfrastructure #SatelliteCommunication #MicrowaveRadio #TestAndMeasurement #AnalogDevices #RFDesign #ClockGeneration

Ultrasonic Sensor, Aluminum, Transmitter, 80Degree, 0.2M-15M range #commonpartslibrary #sensor #transducer

Wireless Power Receiver PMIC 20-VQFN (3.5x4.5) BQ51013BRHLT is a wireless power receiver integrated circuit from Texas Instruments designed for inductive power transfer applications compliant with wireless charging standards. The device integrates power rectification, voltage regulation, communication control, and protection circuitry to enable efficient wireless charging for portable and embedded electronic devices. This receiver IC is optimized for low-power wireless charging systems and supports seamless energy transfer from compatible transmitter platforms without the need for physical connectors. It provides regulated power output suitable for charging batteries and powering embedded systems while incorporating dynamic power management, foreign object detection support, thermal protection, and overvoltage protection for safe operation. The BQ51013BRHLT is widely used in wearable electronics, wireless sensor platforms, medical devices, mobile accessories, handheld products, and compact consumer electronics requiring cable-free charging capability. Its compact package and high integration level simplify PCB layout and reduce external component requirements for space-constrained wireless power designs. #commonpartslibrary #wirelesscharging #powermanagement #texasinstruments #wirelesspower #batterycharging #embeddedhardware #portableelectronics #electronicscomponents #inductivecharging