Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-223-5 Linear Voltage Regulator (LDO) providing a fixed 3.3 V output with up to 500 mA output current from an input voltage range of 2.3 V to 6.0 V. It features low dropout voltage, stable operation with ceramic output capacitors, current limiting, short-circuit protection, and overtemperature protection, making it suitable for low-voltage power regulation applications. #LDO #LinearVoltageRegulator #FixedOutput #3V3 #500mA #LowDropout #PowerManagement #Microchip

Isolated Module DC DC Converter 1 Output 3.3 ~ 5V 200mA 3V - 5.5V Input Isolated DC/DC converter module that provides a regulated isolated power supply with a 3 V to 5.5 V input voltage range, 5 V output, 1 W maximum output power, and 2.5 kVRMS isolation voltage. The device integrates power MOSFETs, a transformer, and a feedback circuit, and includes continuous short-circuit protection and over-temperature protection in a LGA-12 (4 mm × 5 mm) package. #IsolatedDCDCConverter #DCDCModule #PowerModule #RegulatedOutput #5VOutput #1W #2p5kVRMSIsolation #LGA12 #MonolithicPowerSystems #PowerManagement

Isolated Module DC DC Converter 1 Output 24V 6.3A 9V - 36V Input DC-DC converter designed to provide an isolated, regulated 24 V output from a 9–36 VDC input. It delivers up to 150 W (24 V, 6.3 A), features a 4:1 input range, 2.25 kVDC input-to-output isolation, remote on/off control, output trim of ±10%, and includes overcurrent, overvoltage, overtemperature, and short-circuit protection. #PowerSupply #DCDCConverter #IsolatedConverter #QuarterBrick #XPPower #150W #24VOutput #WideInput

The NCP1345, manufactured by onsemi, is a highly integrated quasi-resonant flyback controller optimized for high-performance off-line USB-PD and USB Type-C power converters. This advanced controller features a dual-pin Vcc architecture for simplified Vcc management and enhanced performance, allowing direct connection to the auxiliary winding. It incorporates a precise primary side-based output current limiting circuit to ensure a constant output current limit irrespective of the programmed output voltage or nameplate output power. The quasi-resonant (QR) current-mode flyback stage is equipped with proprietary valley-lockout circuitry for stable valley switching down to the 6th valley and transitions to frequency foldback mode to reduce switching losses. Additional load decreases trigger the NCP1345 to enter skip mode for efficient power management. Key protective features include internal brownout detection, maximum output current limit, latched overvoltage, and NTC-ready overtemperature protection, as well as line removal detection for safe discharge of X2 capacitors. The NCP1345 is available in SOIC-9 NB packages and supports various configurations and protection mechanisms, making it a robust solution for modern power supply designs.

IC SURGE STOPPER 2.7V~23V VQFN-10-HR(2x2) The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices an excellent choice for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to establish an almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation. Output slew rate and inrush current can be adjusted using an external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor. The devices are available in a 2mm × 2mm, 10- pin HotRod™ QFN package for improved thermal performance and reduced system footprint. The devices are characterized for operation over a junction temperature range from –40°C to +125°C. • Wide operating input voltage range: 2.7V to 23V – 28V absolute maximum – Withstands negative voltages up to –15V • Integrated back-to-back FETs with low onresistance: RON = 28.3mΩ (typical) • Ideal diode operation with true reverse-current blocking • Fast overvoltage protection – Overvoltage clamp (OVC) with pin-selectable threshold (3.8V, 5.7V, 13.8V) and 5μs (typical) response time OR – Adjustable overvoltage lockout (OVLO) with 1.2μs (typical) response time • Overcurrent protection with load current monitor output (ILM) – Active current limit OR circuit-breaker options – Adjustable threshold (ILIM) 0.5A to 6A • ±10% accuracy for ILIM > 1A – Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM – Output load current monitor accuracy: ±6% (IOUT ≥ 1A) • Fast-trip response for short-circuit protection – 500ns (typical) response time – Adjustable (2 × ILIM) and fixed thresholds • Active high enable input with adjustable undervoltage lockout threshold (UVLO) • Adjustable output slew rate control (dVdt) • Overtemperature protection • Digital outputs – Priority power MUX control (AUXOFF) and fault indication (FLT) or – Power Good indication (PG) with adjustable threshold (PGTH) • UL 2367 recognition – File No. E339631 – RILM ≥ 750Ω • IEC 62368-1 CB certified • Small footprint: QFN 2mm × 2mm, 0.45mm pitch #CommonPartsLibrary #IntegratedCircuit #PowerManagement

IC SURGE STOPPER 2.7V~18V WSON-8-EP(2x2) TPS259530DSGT is a highly integrated eFuse (electronic fuse) from Texas Instruments designed to provide advanced circuit protection and power management for systems operating from 2.7 V to 18 V. It integrates a low-resistance MOSFET, adjustable current limiting, fast overvoltage protection, inrush current control, and thermal shutdown features, making it ideal for hot-swap, industrial, consumer electronics, storage, and adapter-powered applications. Key Features Wide input voltage range: 2.7 V to 18 V 34 mΩ typical integrated MOSFET on-resistance Adjustable current limit from 0.5 A to 4 A Fast overvoltage protection with 5 µs typical response time Adjustable undervoltage lockout (UVLO) Adjustable output slew rate (dV/dt) for inrush current control Load current monitor (ILM) output Fault indication (FLT) output Overtemperature protection (OTP) Hot-swap and hot-plug capable IEC 62368-1 certified and UL recognized Compact 8-pin WSON/DSG package Hashtags #TPS259530DSGT #TexasInstruments #eFuse #HotSwapController #CircuitProtection #PowerManagement #OvervoltageProtection #CurrentLimiting #InrushCurrentControl #IndustrialElectronics #EmbeddedSystems #HardwareDesign #ElectronicsEngineering #PowerSupplyProtection #PCBDesign

TPS259621DDAR ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP LCSC Part Number: C2155774 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS2596 eFuse integrated FET hot-swap protection IC, 2.7V to 19V input voltage range, 21V absolute maximum input rating, 0.125A to 2A adjustable current limit, 89mΩ typical on-resistance, accurate current monitor output, active-high enable with adjustable UVLO, fast overvoltage clamp or adjustable OVLO options, adjustable output slew-rate control, overtemperature protection, fault indication pin, IEC 61000-4-4 EFT immunity, -40°C to +125°C junction temperature range, SOIC-8 package. Search Keywords: TPS2596, Texas Instruments TPS2596, TI TPS2596, TPS2596 eFuse, TPS2596 hot swap controller, TPS2596 power protection IC, TPS2596 current limit switch, TPS259620DDA, TPS259621DDA, TPS259630DDA, TPS259631DDA, 2A eFuse, 19V eFuse, 89mOhm eFuse, adjustable current limit eFuse, overvoltage protection eFuse, current monitor eFuse, SOIC-8 eFuse, TPS2596 datasheet Hashtags: #TPS2596 #TexasInstrumentsTPS2596 #TIEFuse #eFuse #HotSwapProtection #PowerProtectionIC #CurrentLimitSwitch #IntegratedFETSwitch #2AeFuse #19VeFuse #89mOhmSwitch #OvervoltageProtection #UVLOProtection #CurrentMonitorIC #FaultIndicator #SOIC8 #TPS259620DDA #TPS259621DDA #TPS259630DDA #TPS259631DDA