Counter IC Counter, Decade 1 Element 4 Bit Positive Edge 16-PDIP #CommonPartsLibrary #IntegratedCircuit #Logic #Counter #Divider #74HC192

MAX98357A Series 5.5V 3.2W PCM Input Class D Audio Power Amplifier - TQFN-16 The MAX98357A/MAX98357B is an easy-to-use, low-cost, digital pulse-code modulation (PCM) input Class D amplifier that provides industry-leading Class AB audio performance with Class D efficiency. The digital audio interface automatically recognizes up to 35 different PCM and TDM clocking schemes which eliminates the need for I2C programming. Operation is further simplified by eliminating the need for an external MCLK signal that is typically used for PCM communication. Simply supply power, LRCLK, BCLK, and digital audio to generate audio! Furthermore, a novel pinout allows customers to use the cost-effective WLP package with no need for expensive vias (refer to Application Note 6643: Optimize Cost, Size, and Performance with MAX98357 WLP for more information). The digital audio interface is highly flexible with the MAX98357A supporting I2S data and the MAX98357B supporting left-justified data. Both ICs support 8 channel time division multiplexed (TDM) data. The digital audio interface accepts specified sample rates between 8kHz and 96kHz for all supported data formats. The ICs can be configured to produce a left channel, right channel, or (left/2 + right/2) output from the stereo input data. The ICs operate using 16/24/32-bit data for I2S and left-justified modes as well as 16-bit or 32-bit data using TDM mode. The ICs eliminate the need for the external MCLK signal that is typically used for PCM communication. This reduces EMI and possible board coupling issues in addition to reducing the size and pin count of the ICs. The ICs also feature a very high wideband jitter tolerance (12ns typ) on BCLK and LRCLK to provide robust operation. Active emissions-limiting, edge-rate limiting, and overshoot control circuitry greatly reduce EMI. A filterless spread-spectrum modulation scheme eliminates the need for output filtering found in traditional Class D devices and reduces the component count of the solution. The ICs are available in 9-pin WLP (1.345mm x 1.435mm x 0.64mm) and 16-pin TQFN (3mm x 3mm x 0.75mm) packages and are specified over the -40°C to +85°C temperature range. ● Single-Supply Operation (2.5V to 5.5V) ● 3.2W Output Power into 4Ω at 5V ● 2.4mA Quiescent Current ● 92% Efficiency (RL = 8Ω, POUT = 1W) ● 22.8μVRMS Output Noise (AV = 15dB) ● Low 0.013% THD+N at 1kHz ● No MCLK Required ● Sample Rates of 8kHz to 96kHz ● Supports Left, Right, or (Left/2 + Right/2) Output ● Sophisticated Edge Rate Control Enables Filterless Class D Outputs ● 77dB PSRR at 1kHz ● Low RF Susceptibility Rejects TDMA Noise from GSM Radios ● Extensive Click-and-Pop Reduction Circuitry ● Robust Short-Circuit and Thermal Protection ● Available in Space-Saving Packages: 1.345mm x 1.435mm WLP (0.4mm Pitch) and 3mm x 3mm TQFN ● Solution Size with Single Bypass Capacitor is 4.32mm2 Applications ● Single Li-ion Cell/5V Devices ● Smart Speakers ● Notebook Computers ● IoT Devices ● Gaming Devices (Audio and Haptics) ● Smartphones ● Tablets ● Cameras #commonpartslibrary #integratedcircuit #linearamplifier #mono

Flip Flop 1 Element D-Type 8 Bit Positive Edge 20-DIP (0.300", 7.62mm) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flops #74HC374

Tactile Switch SPST-NO Side Actuated Edge Mount, Right Angle

52 Position Female Connector PCI Express Mini Card Gold 0.031" (0.80mm) Black Generic Mini PCIe 52-pin add-in card edge connector Card edge connector for board-to-board Mini PCI Express and mSATA interfaces, featuring 52 contacts on a 0.8 mm pitch with a 7.0 mm stack height. This surface-mount, right-angle female socket is designed for Mini PCI Express cards and uses gold-flash contacts with matte-tin solder tails. #CardEdgeConnector #MiniPCIExpress #mSATA #BoardToBoard #52Position #0p8mmPitch #SurfaceMount #RightAngle #TEConnectivity #commonpartslibrary #connector #femaleconnector #pci

Counter IC Binary Counter 2 Element 4 Bit Negative Edge 14-SOIC #CommonPartsLibrary #IntegratedCircuit #Logic #Counter #Divider #74LS393

Flip Flop 2 Element JK Type 1 Bit Positive Edge 16-DIP (0.300", 7.62mm) #commonpartslibrary #integratedcircuit #flipflop

Counter IC Binary Counter 1 Element 14 Bit Negative Edge 16-SO #commonpartslibrary #integratedcircuit #binary #counter

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-DIP (0.300", 7.62mm) #CommonPartsLibrary #IntegratedCircuit #Logic #FlipFlop

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-SOIC (0.209", 5.30mm Width) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop

USB-C (USB TYPE-C) USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)) Plug Connector 24 Position Board Edge, Surface Mount; Through Hole, Right Angle Global Connector Technology (GCT) USB4155-03-C is a USB Type-C Plug Connector designed for USB 3.2 Gen 2 (USB 3.1 Gen 2 SuperSpeed+) high-speed data applications. It is a right-angle, horizontal SMT connector with a 24-contact configuration, suitable for PCB edge mounting. The connector supports high-speed signal transmission, power delivery, and durable mechanical connection for embedded systems, portable devices, and consumer electronics. Key Features: Connector Type: USB Type-C Plug Connector USB Standard: USB 3.2 Gen 2 / USB 3.1 Gen 2 SuperSpeed+ Number of Contacts: 24 positions Mounting Type: Surface Mount Technology (SMT), right-angle horizontal PCB mounting Data Transfer Rate: Supports high-speed USB 3.2 Gen 2 communication (up to 10 Gbps) Current Rating: Up to 5 A for power delivery applications Voltage Rating: Up to 48 VDC Durability: Rated for approximately 10,000 mating cycles Shielding: Metal shielded housing for EMI protection Contact Finish: Gold-plated contacts for reliable conductivity Operating Temperature: -30°C to +85°C Application: Embedded systems, laptops, tablets, mobile devices, storage devices, and USB-C interface boards Component Classification: Category: Connector / Interconnect Component Subcategory: USB Type-C Connector Not an IC or semiconductor component PCB Footprint Required: Yes Mechanical Part: No (it is an electromechanical connector with soldered electrical terminals) #CommonPartsLibrary #Connector #USBTypeC #USBConnector #USB32Gen2 #USB31Gen2 #SuperSpeedPlus #GCT #BoardMountConnector #SMTConnector #HighSpeedInterface #PCBDesign #ElectronicComponents #InterconnectTechnology

Flip Flop 2 Element D-Type 1 Bit Positive Edge 14-TSSOP (0.173", 4.40mm Width) #CommonPartsLibrary #IntegratedCircuit #Logic #Flip-Flop #CD4013