This project is a reference design for an ESP32-PICO-MINI-02 based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32PICO #ESP32PICOMINI #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a minimal setup for of tag device that uses the ESP32-WROOM-32E to communicate with other BLE devices. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #tag #airtag #reusable #module #simple-embedded #espressif

This project is a reference design for an ESP32-S2-MINI-1 based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #template

This is an ESP32-C3 module based on the manufacturer's recommendations with a uFL SMD antenna and USB C on board #WiFi #ESP32-C3 #IoT #reusable #module #simple-embedded #espressif #sublayout

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #reusable #module #edge-computing #edgeComputing #espressif #sublayout #iot #iot #ESP32 #relay

Microcontroller, Wi-Fi 802.11b/g/n, Bluetooth, 32bit Microcontroller Wi-Fi BT ESP ESP32 Espressif QFN*1EP*7x7mm*P0.4mm*

This is a module of ESP32-S3-WROOM-1U. The board has 3 LEDs, USB C for firmware, EN and BOOT buttons, and 2 IO connectors for development #IoT #WiFi #MCU #RF #ESP32 #part #reusable #module #simple-embedded #espressif #sublayout

This is a smart blind control system module designed to automate the operation of window blinds. It utilizes an ESP32 microcontroller for managing control signals and an A4988 stepper motor driver to control blinds' movement. It also includes USB interfacing and LED feedback. #reusable #module #edge-computing #edgeComputing #espressif #sublayout #blind #DC #motor #servo #esp32

This is a module of ESP32-C3-MINI-1U based on the manufacturer's recommendations. On board we have an ESP module, USB C for firmware, 2 connectors with IOs and RGB LED #ESP32 #WiFi #LED #IoT #BLE #ARM #reusable #module #simple-embedded #espressif #sublayout

This is a ESP32-C6-WROOM-1 module built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #reusable #module #simple-embedded #espressif #sublayout

This is a ESP32-H2-MINI-1 module built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #reusable #module #simple-embedded #espressif #sublayout

This is a ESP32-C6-MINI-1U module built on manufacture recommendations. Here is on board an ESP32-H2-MINI-1 module, RESET and BOOT buttons, RGB LED, and 2 connectors for IOs #ESP32 #WiFi #IoT #ARM #reusable #module #simple-embedded #espressif #sublayout

This is a Bluetooth Low-Energy (BLE) temperature sensor module. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #module #BLE #ESP32 #reusable #module #simple-embedded #espressif #sublayout

This is a ESP8684-WROOM-02UC module. This module has USB C for flashing via CH340, RESET and BOOT buttons, 3.3V regulator and 2 IO connectors #WiFi #BLE #MCU #reusable #module #simple-embedded #espressif #sublayout

This is a WiFi remote control module utilizing an ESP32-PICO. It includes a battery circuit, a buzzer, and multiple control buttons for inputs. #reusable #module #simple-embedded #espressif #button #esp #sublayout

The ESP32-S3-DEVKITC-1U-N8R8 from Espressif Systems is an evaluation board designed for wireless communication applications. It features a 32-bit Xtensa dual-core processor running at 240MHz, providing strong processing power for complex tasks. The board supports 802.11 b/g/n Wi-Fi and Bluetooth® 5.x (BLE), operating at 2.4GHz, ensuring seamless wireless communication. 8 MB Quad flash and 8MB Octal PSRAM,

The ESP32-WROOM-32E (16MB) is a highly integrated Wi-Fi + Bluetooth + Bluetooth Low Energy (BLE) module developed by Espressif. It is based on the ESP32-D0WD-V3 chip and features a dual-core processor, rich peripherals, and large flash memory—making it ideal for IoT, embedded systems, and wireless applications. This module is part of the upgraded WROOM-32E series, offering improved RF performance, better stability, and enhanced reliability compared to earlier versions like the 32D. Key Features (16MB Variant) Processor & Memory Dual-core Xtensa® 32-bit LX6 CPU, up to 240 MHz 520 KB SRAM + 448 KB ROM 16 MB SPI Flash (large storage for firmware/data) Optional variants with PSRAM for memory-intensive tasks Connectivity 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth v4.2 (BR/EDR + BLE) Integrated PCB antenna (no external antenna needed) Peripherals & Interfaces Up to 26–38 GPIOs (depending on usage) Supports: UART, SPI, I2C, I2S PWM (LED & motor control) ADC, DAC Capacitive touch sensors SD/SDIO/MMC, CAN (TWAI) Electrical & Physical Operating voltage: 3.0V – 3.6V Operating temperature: –40°C to +85°C (industrial range) Compact size: 18 × 25.5 × 3.1 mm Typical Applications Smart home devices (lighting, appliances) IoT sensors and gateways Industrial automation systems Wearables and smart gadgets Audio/voice processing (thanks to dual-core + large flash) #module #ESP32 #16MB

This project is a reference design for an ESP32-WROOM-32U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a WiFi Camera with Motion Detection, utilizing ESP32-CAM module and HC-SR501 PIR sensor. The camera is activated by the sensor's output. The system also includes power regulation and communication headers for setup and control. #WiFi #MCU #PIR #ReferenceDesign #project #ESP32 #camera #reusable #module #edgeComputing #espressif #template