N-Channel 30 V 5.7A (Ta) 1.4W (Ta) Surface Mount SOT-23-3 The AO3400A N-Channel MOSFET is a 30V N-channel enhancement-mode MOSFET designed using trench MOSFET technology. It is widely used for load switching, DC-DC converters, motor driving, and PWM control applications due to its very low on-resistance and compact SOT-23 package. It is especially popular in small electronics and embedded systems because it can be driven directly by 3.3V or 5V logic signals, making it ideal for microcontroller-based designs. Key Features Drain-Source Voltage (VDS): 30V Continuous Drain Current (ID): up to 5.7A (at 25°C) Ultra-low RDS(on): ~26.5 mΩ @ VGS = 10V ~32 mΩ @ VGS = 4.5V ~48 mΩ @ VGS = 2.5V Logic-level gate drive (works well with MCU GPIOs) Fast switching performance (ns-range switching times) Low gate charge (~6–7 nC) → efficient switching Compact SOT-23 package for space-saving PCB design Low power dissipation (~1.4W typical at 25°C ambient) Operating temperature: −55°C to +150°C Typical Applications Load switching (LEDs, sensors, small motors) Power management in battery-powered devices DC-DC converters PWM control circuits Fan and heater control in embedded systems #AO3400A #MOSFET #NChannelMOSFET #PowerElectronics #SOT23 #LoadSwitch #EmbeddedSystems #ElectronicsComponents #TrenchMOSFET #Commonpartslibrary #Transistor #FET

JST XH Connector Header Through Hole 2 position 0.098" (2.50mm) B2B-XH-A(LF)(SN) is a 2-position, 2.50 mm pitch, through-hole shrouded male PCB header from the JST XH Series. It is designed for reliable wire-to-board connections in consumer electronics, industrial equipment, power supplies, battery packs, and embedded systems. The connector features a polarized shrouded housing to prevent incorrect mating and supports secure, dependable electrical connections with easy PCB assembly. Key Features: 2-position wire-to-board header 2.50 mm contact pitch Through-hole (THT) PCB mounting Straight vertical orientation Shrouded housing with polarization to prevent misalignment Rated for up to 3 A current and 250 V AC/DC Tin-plated brass contacts for reliable conductivity Operating temperature range: -25°C to +85°C Compatible with JST XH Series crimp housings and terminals Ideal for power and signal connections in compact electronic assemblies. #JST #XHSeries #PCBHeader #WireToBoard #Connector #ThroughHole #THT #ShroudedHeader #2Position #25mmPitch #Electronics #EmbeddedSystems #IndustrialElectronics #PowerConnector #PCBDesign

JST PH SMD Connector Header Surface Mount, Right Angle 2 position 0.079" (2.00mm) The S2B-PH-SM4-TB(LF)(SN) is a surface-mount, 2-position wire-to-board header connector from the JST PH series. It is designed for compact and reliable connections in low-current, signal, and power applications. With a 2.0 mm pitch and secure friction-lock mechanism, this connector ensures stable mating with corresponding PH series crimp housings. The connector features side-entry (horizontal) orientation and solder tabs for enhanced PCB retention, making it suitable for automated assembly and high-vibration environments. Key Features 2-position connector (2 circuits) 2.0 mm pitch spacing Surface-mount, right-angle (side entry) configuration Friction-lock mechanism for secure mating Solder hold-down tabs for mechanical stability Compact, low-profile design Compatible with JST PH series housings and terminals Tape & reel packaging for automated assembly Mechanical Characteristics Mounting Type: Surface Mount (SMT) Orientation: Right Angle (Side Entry) Pitch: 2.0 mm Number of Positions: 2 Mating Type: Friction lock Board Retention: Solder tabs (SM4 type) Electrical Characteristics Rated Current: 2 A (per contact, AWG #24) Rated Voltage: 100 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 100 MΩ Withstanding Voltage: 800 VAC/minute Material Specifications Insulator: Polyamide (Nylon), UL94V-0 rated Contact Material: Copper alloy Contact Plating: Tin over nickel (Sn plating) Environmental Specifications Operating Temperature Range: -25°C to +85°C Storage Temperature: -40°C to +85°C Packaging Information Packaging Type: Tape & Reel (TB suffix) Lead-Free: Yes (LF) Surface Finish: Tin plating (SN) Compatible Components Mating Housing: JST PH series (e.g., PHR-2) Crimp Terminals: SPH-002T-P0.5S or equivalent Typical Applications Consumer electronics Battery connections Signal and low-power connections Embedded systems and IoT devices Portable and compact electronic assemblies #commonpartslibrary #connector #header #tht

JST PH Connector Header Through Hole 3 position 0.079" (2.00mm) The B3B-PH-K-S(LF)(SN) is a 3-position, 2.0 mm pitch, through-hole (THT) male header from the JST PH series, designed for wire-to-board connections. It is a top-entry, shrouded connector that mates with JST PH crimp housings, commonly used for compact internal wiring in electronic devices such as consumer electronics, battery connections, and embedded systems. This connector is optimized for high-density PCB layouts, offering a reliable and secure connection with a locking mechanism and low contact resistance. Key Features Mechanical 3 positions (3-pin) 2.0 mm pitch (compact spacing) Through-hole mounting (THT) Top-entry / vertical orientation Shrouded header (prevents misalignment) Detent lock / friction lock for secure mating Electrical Rated current: up to 2A per pin Rated voltage: up to 100V AC/DC Low contact resistance (~10 mΩ max initial) High insulation resistance (≥1000 MΩ) Environmental Operating temperature: -25°C to +85°C Design & Reliability Fully shrouded design → protects pins and ensures proper insertion Reliable contact structure with dimpled contacts for stable connection PCB retention mechanism → improves mechanical stability Tin-plated contacts for good conductivity and solderability Application Use Commonly used for: Battery connectors Sensor modules Embedded systems (e.g., microcontroller boards) Consumer electronics internal wiring Power + signal low-current connections #commonpartslibrary #connector #header #tht

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

Overcharge, overcurrent and overdischarge protection IC for single cell lithium-ion/polymer battery battery protection li-ion lipo overcurrent overdischarge overcharge SOT?23*

Board Mount Humidity Sensors Intermediate Humidity and Temperature Sensor Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R2 is a fully calibrated, low-power environmental sensor that measures relative humidity (RH) and temperature. It integrates sensing elements, signal processing, and a digital interface into a small surface-mount package, making it ideal for space-constrained designs. Key Features Sensor Type: Digital humidity and temperature sensor Interface: I²C (easy MCU integration) Supply Voltage: ~1.08 V to 3.6 V Humidity Accuracy: up to ±1.8% RH (typical) Temperature Accuracy: up to ±0.2 °C (typical) Response Time: Fast measurement and low latency Power Consumption: Ultra-low, suitable for battery devices Package: DFN (compact, ~1.5 × 1.5 mm) Factory Calibration: No external calibration required Functional Overview The sensor uses capacitive humidity sensing combined with a bandgap temperature sensor. Internal electronics convert these measurements into digital data via I²C, eliminating the need for external ADCs or complex signal conditioning. Design Advantages Small footprint for compact PCBs Low power consumption for IoT and portable devices High reliability with long-term stability Fast response time for real-time monitoring Simple integration with microcontrollers Typical Applications IoT and smart home devices HVAC and climate control systems Wearables and portable electronics Industrial monitoring systems Environmental data logging #CommonPartsLibrary #Sensors,-Transducer #Humidity #Moisture-Sensor #SHT4x

1.5A USB-Friendly Li-Ion Battery Charger and Power-Path Management IC with 4.2 VBAT The BQ24075TRGTR (from Texas Instruments) is a highly integrated single-cell Li-Ion / Li-Polymer linear battery charger IC with power-path management. It is designed for portable and space-constrained applications, allowing a device to be powered from a USB port or AC adapter while simultaneously charging the battery. The device integrates charging control, power-path management, and safety features into a compact package. A key feature is its Dynamic Power Path Management (DPPM), which ensures the system is powered even when the battery is low or absent, while intelligently managing charging current. Key Features Battery Charging Supports single-cell Li-Ion / Li-Polymer batteries Up to 1.5 A programmable charge current Three-phase charging: Pre-charge (conditioning) Constant current Constant voltage Fixed 4.2 V charge voltage Power Path Management Dynamic Power Path Management (DPPM): Powers system and charges battery simultaneously Prioritizes system load over charging Allows system operation even with: Deeply discharged battery No battery connected Input & Power Features Operates from: USB input (100 mA / 500 mA selectable) AC adapter Programmable input current limit up to 1.5 A Input voltage range: ~4.35 V to 6.4 V (28 V max rating) Input dynamic power management (VIN-DPM) prevents source overload Protection & Safety Thermal regulation and shutdown Over-voltage protection (OVP) Short-circuit and reverse current protection Battery temperature monitoring (NTC thermistor input) Battery disconnect (SYSOFF) feature Control & Status Standalone operation (no MCU required, resistor-programmable) Charge status outputs: Charging Charge complete Power good Physical Characteristics Package: 16-pin VQFN (3 mm × 3 mm) Operating temperature: –40°C to +85°C #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Linear Battery Charger Controller Li-Ion/Li-Pol 505mA 4.2V 5-Pin SOT-23 T/R #commonpartslibrary #integratedcircuit #powermanagement #batterycharger

Polymeric PTC Resettable Fuse 60V 500 mA Ih Surface Mount 2-SMD 500mA resettable fuse pptc The SMD050F-2 is a surface-mount resettable fuse (PPTC – Polymer Positive Temperature Coefficient) designed to provide overcurrent protection in low-voltage electronic circuits. It operates by increasing its resistance significantly when excessive current flows, thereby limiting current and protecting downstream components. Once the fault condition is removed and the device cools, it automatically resets to its low-resistance state, enabling normal operation without replacement. This component is commonly used in power supply lines, USB ports, battery-powered devices, and general electronic protection applications where space-saving and reliability are important. Key Features Resettable overcurrent protection (self-recovering) Surface-mount package for compact PCB layouts Low resistance in normal operation Fast response to fault conditions Automatic reset after fault removal RoHS compliant and lead-free Electrical Characteristics Hold current: 0.5 A Trip current: 1.0 A (typical) Maximum voltage: 60 V Maximum current: 40 A (fault current rating) Initial resistance: low resistance range suitable for minimal voltage drop Resistance after trip: significantly increased to limit current Thermal Characteristics Operating temperature range: -40°C to +85°C Trip time dependent on applied current and ambient temperature Reset time dependent on cooling conditions Mechanical Characteristics Package type: Surface-mount (SMD) Compact footprint suitable for dense PCB layouts Compatible with standard reflow soldering processes Applications USB and peripheral port protection Power supply and DC line protection Battery pack protection Consumer electronics Industrial control circuits Compliance and Standards RoHS compliant Halogen-free (depending on manufacturer variant) Meets industry standards for resettable fuses #commonpartslibrary #circuitprotection #ptc #fuse

Linear Voltage Regulator IC Positive Fixed 1 Output 500mA SOT-23-5 The TLV75533PDBVR is a low-dropout (LDO) linear voltage regulator designed to provide a stable 3.3 V output from a higher input voltage source. It features ultra-low quiescent current and high power-supply rejection ratio (PSRR), making it ideal for battery-powered and noise-sensitive applications such as IoT devices, portable electronics, and RF circuits. The device is optimized for fast transient response and stable operation with small ceramic output capacitors. Key Features Fixed output voltage: 3.3 V Low dropout voltage (typ. ~200 mV at full load) Ultra-low quiescent current (typ. 25 µA) High PSRR for noise-sensitive applications Stable with small ceramic capacitors (≥1 µF) Thermal shutdown and overcurrent protection Available in compact SOT-23-5 package (DBV) Absolute Maximum Ratings Input voltage: –0.3 V to 6.5 V Output voltage: –0.3 V to (VIN + 0.3 V) Operating junction temperature: –40°C to +125°C Storage temperature range: –65°C to +150°C Recommended Operating Conditions Input voltage range: 1.45 V to 5.5 V Output voltage: 3.3 V (fixed) Output current: up to 500 mA Operating temperature range: –40°C to +125°C Electrical Characteristics (Typical unless otherwise noted) Output voltage accuracy: ±1% Dropout voltage: ~200 mV @ 500 mA Quiescent current: ~25 µA PSRR: up to 70 dB (at 1 kHz) Line regulation: <0.05%/V Load regulation: <0.5% Pin Configuration (SOT-23-5) Pin 1: IN – Input voltage Pin 2: GND – Ground Pin 3: EN – Enable (active high) Pin 4: NC – No connect Pin 5: OUT – Regulated output Typical Application Power management for microcontrollers and sensors Battery-powered portable devices RF and analog circuits requiring low noise supply IoT and wearable electronics Protection Features Thermal shutdown protection Overcurrent protection Undervoltage lockout (UVLO) #commonpartsLibrary #integratedcircuit #powermanagement #voltageregulator

Battery Holder (Open) AA 2 Cell PC Pin #AAA #battery #LR6

Battery Battery Monitor IC Lithium Ion 8-TDFN-EP (2x2) #Commonpartslibrary #Integratedcircuit #Powermanagement #Batterymanagement

Coin Cell Battery Holders SFC MNT FOR CR2032 #Battery-holder #Coin #Connector #SMD

OR Controller N+1 ORing Controller N-Channel 1:1 TSOT-23-8 The LM74700QDDFRQ1 is an automotive-qualified ideal diode controller designed to provide reverse polarity protection, reverse current blocking, and input power path management in low-voltage DC power systems. The device controls an external N-channel MOSFET to emulate an ideal diode with very low forward voltage drop and reduced power dissipation compared to conventional Schottky diodes. It is optimized for automotive and industrial applications requiring robust protection against negative supply voltages, load dump conditions, and reverse battery events. The controller supports wide input voltage operation and integrates fast response circuitry for fault handling and transient protection. The device is suitable for power OR-ing, hot-swap, redundant power supply systems, and battery-connected applications where efficiency, reliability, and thermal performance are critical. Engineering Specification Device Type Automotive ideal diode controller with reverse battery and reverse current protection Qualification Standard AEC-Q100 qualified for automotive applications Control Topology External N-channel MOSFET controller for ideal diode operation Input Voltage Range Supports wide automotive and industrial supply voltage ranges Reverse Polarity Protection Provides protection against negative input voltage conditions and reverse battery connection Reverse Current Blocking Actively prevents reverse current flow during output-to-input fault conditions Forward Voltage Drop Low conduction losses through external MOSFET control for high-efficiency power delivery Transient Protection Capable of handling automotive transient events including load dump conditions Gate Drive Control Integrated gate driver optimized for fast MOSFET switching and protection response Power Path Management Supports power OR-ing and redundant supply architectures Fault Response Fast turn-off during reverse current and fault events Current Consumption Low operating quiescent current suitable for always-on systems Thermal Performance Designed for efficient thermal operation with external MOSFET-based power dissipation Operating Temperature Range Automotive-grade extended temperature operation Package Type Small-outline automotive package suitable for compact PCB layouts #commonpartsLibrary #integratedcircuit #powermanagement #orcontroller

Humidity, Pressure, Temperature 0 ~ 100% RH I²C, SPI ±3% 1 s Surface Mount BME280 I2C breakout module The BME280 integrates three sensors—temperature, relative humidity, and pressure—along with a high-performance digital interface. It communicates via I²C or SPI, making it easy to interface with microcontrollers like Arduino, ESP32, and STM32. It is designed for low power consumption, making it suitable for battery-powered applications such as portable weather stations and smart home devices. Key Features Environmental Sensing Measures: Temperature Relative Humidity Barometric Pressure Enables altitude estimation based on pressure readings High Accuracy Temperature: ±1.0°C (typical) Humidity: ±3% RH (typical) Pressure: ±1 hPa (typical) Low Power Consumption Typical current: ~0.6 µA (sleep mode) ~3.6 µA (measurement mode) Ideal for battery-operated devices Communication Interfaces Supports: I²C (up to 3.4 MHz) SPI (3-wire / 4-wire) Easy integration with most microcontrollers Compact Package Small footprint: 2.5 × 2.5 × 0.93 mm LGA package Suitable for space-constrained designs Built-in Features Factory-calibrated coefficients stored in NVM Configurable oversampling and filtering Integrated ADC for high-resolution measurements #commonpartslibrary #sensor #humidity #pressure

Temperature Sensor Digital, Local -55°C ~ 150°C 16 b 6-WSON (2x2) The TMP117AIDRVR is a high-precision digital temperature sensor manufactured by Texas Instruments. The device provides accurate temperature measurements through an I²C-compatible digital interface and is optimized for applications requiring medical-grade accuracy, low power consumption, and compact PCB footprint. The sensor integrates a precision temperature sensing element, analog-to-digital converter, calibration memory, and digital interface into a single compact package. The device supports continuous conversion and shutdown operating modes, enabling efficient thermal monitoring in battery-powered and always-on systems. Internal calibration minimizes external component requirements while providing highly linear and repeatable temperature measurements across an extended operating range. The TMP117AIDRVR is commonly used in industrial controls, wearable electronics, healthcare equipment, environmental monitoring systems, battery management systems, consumer electronics, and precision instrumentation. Electrical Characteristics Supply voltage supports low-voltage digital systems and portable electronics applications. Ultra-low operating current enables long battery life in energy-sensitive designs. Integrated EEPROM allows programmable offset correction and configuration storage. Digital output eliminates the need for external ADC circuitry. High measurement resolution supports precision thermal monitoring applications. Low self-heating characteristics improve measurement stability and accuracy. Functional Features High-accuracy digital temperature sensing. I²C and SMBus compatible communication interface. Programmable alert functionality for thermal threshold monitoring. Continuous conversion and low-power shutdown operating modes. Integrated non-volatile memory for user configuration storage. Wide operating temperature range for industrial and commercial environments. Fast conversion timing suitable for real-time monitoring systems. Factory-calibrated performance requiring minimal external calibration. Package Information Package type is WSON with compact surface-mount footprint suitable for dense PCB layouts. Moisture-sensitive package designed for automated assembly processes. Lead-free and RoHS-compliant construction. Typical Applications Medical thermometers and patient monitoring systems. Industrial temperature monitoring equipment. Battery-powered portable electronics. HVAC and environmental sensing systems. Data acquisition and instrumentation systems. Server and embedded thermal management applications. Consumer electronics requiring precision thermal sensing. #commonpartslibrary #integratedcircuit #temperaturesensor

MAX-M10 RF Receiver BeiDou, Galileo, GLONASS, GPS, GNSS 1.561GHz, 1.575GHz, 1.602GHz -167dBm 921.6kbps Not Included Module The MAX-M10S-00B is a professional-grade, ultra-low-power GNSS positioning module from u-blox based on the u-blox M10 platform. It is designed for battery-powered applications such as asset trackers, wearables, IoT devices, and navigation systems. The module supports simultaneous reception of multiple GNSS constellations, providing high positioning availability, fast acquisition times, and excellent sensitivity even in challenging urban or weak-signal environments. It integrates a TCXO, LNA, and SAW filter to improve RF performance while maintaining very low power consumption. Key Features Multi-constellation GNSS receiver: GPS Galileo GLONASS BeiDou QZSS SBAS support (WAAS, EGNOS, MSAS, GAGAN) Concurrent tracking of up to four GNSS constellations for improved position availability and accuracy. Ultra-low power consumption: Approximately 25 mW in continuous tracking mode, making it ideal for battery-powered devices. High RF sensitivity: Tracking sensitivity up to −167 dBm for reliable operation in weak-signal conditions. High positioning accuracy: Typical position accuracy of approximately 1.5 m CEP under suitable conditions. Navigation update rate: Up to 10 Hz for responsive tracking applications. Integrated RF front-end: Built-in LNA (Low Noise Amplifier) Built-in SAW filter Integrated TCXO for stable operation. Supports Assisted GNSS services: AssistNow Online AssistNow Offline AssistNow Autonomous CloudLocate support for low-power IoT positioning. Communication interfaces: UART I²C NMEA and UBX protocols supported. Wide operating temperature range: −40°C to +85°C. Supply voltage: 1.76 V to 3.6 V. Typical Applications Asset tracking devices Wearable electronics Fleet management systems Industrial IoT Smart meters Drone and robotics navigation Personal navigation devices Timing and synchronization systems Package Information Package Type: Surface-mount LCC module Dimensions: 9.7 mm × 10.1 mm × 2.5 mm (typical module size) #Commonpartslibrary #RF #Wireless #RFreceivers #MAXM10S #uBlox #GNSS #GPS #Galileo #GLONASS #BeiDou #QZSS #NavigationModule #GNSSModule #GPSTracking #AssetTracking #IoT #IndustrialIoT #WearableTech #FleetManagement #DroneNavigation #EmbeddedSystems #ElectronicsDesign #PCBDesign #HardwareEngineering #LowPowerDesign #LocationTracking #Geolocation #RFDesign #LNA #SMTModule