12.288 MHz Temperature-Compensated Crystal Oscillator (TCXO) – High-stability HCMOS TCXO designed for wireless communications, GPS/GNSS receivers, audio systems, networking equipment, industrial automation, embedded controllers, and precision timing applications. Part of the ECS-TXO-5032 Series, it provides a 12.288 MHz output frequency with ±2.5 ppm frequency stability over temperature and ±1.5 ppm initial frequency tolerance for highly accurate clock generation. Operates from a 3.3 V supply with 6 mA maximum current consumption and features an HCMOS output, 10 ns maximum rise/fall time, 2 ms typical startup time, and −135 dBc/Hz phase noise at 1 kHz offset. Packaged in a compact 5.0 × 3.2 mm 4-pad SMD package, it is specified for operation over a −30°C to +85°C temperature range, making it ideal for precision embedded and RF timing applications. #ECSInc #ECSTXO50321228TR #TCXO #TemperatureCompensatedCrystalOscillator #12288MHz #HCMOS #PrecisionTiming #GPS #GNSS #WirelessCommunication #IndustrialElectronics #EmbeddedSystems

Low-Dropout (LDO) Voltage Regulator – Fixed 5.0 V positive-output LDO regulator providing up to 250 mA output current for low-power voltage regulation. Operates from a 2.7 V to 13.2 V input voltage, features 2 µA typical quiescent current, 625 mV typical dropout voltage at 250 mA, ±2% output voltage accuracy, and 44 dB typical PSRR at 100 Hz. Includes overcurrent protection, short-circuit protection, and overtemperature shutdown. Specified for operation over a −40°C to +125°C temperature range and housed in a 3-pin SOT-89 package. #Microchip #MCP1702T5002EMB #MCP1702 #LDO #VoltageRegulator #LowDropout #5V #250mA #LowPower #PowerManagement #SOT89 #EmbeddedSystems

NPN Bipolar Junction Transistor (BJT) – High-voltage NPN transistor for general-purpose switching and amplification, featuring a 160 V collector-emitter breakdown voltage, 600 mA maximum collector current, and 2.25 W power dissipation. Provides a 130 MHz transition frequency, minimum DC current gain (hFE) of 80 at 10 mA, and 200 mV maximum collector-emitter saturation voltage at 50 mA collector current. Specified for operation over a −55°C to +150°C junction temperature range and housed in a PowerDI™ 5 surface-mount package. #DiodesIncorporated #DXT5551P513 #NPNTransistor #BJT #HighVoltageTransistor #SwitchingTransistor #AmplifierTransistor #160V #600mA #PowerDI5 #DiscreteSemiconductor #EmbeddedSystems

Surface-Mount Thick Film Resistor – 43.2 kΩ fixed chip resistor with ±1% tolerance and 0.1 W (1/10 W) power rating. Features a ±100 ppm/°C temperature coefficient, 75 V maximum working voltage, moisture-resistant thick film construction, and operates over a −55°C to +155°C temperature range. Designed for surface-mount assembly in a 0603 (1608 Metric) package. #YAGEO #RC0603FR0743K2L #ThickFilmResistor #ChipResistor #SurfaceMount #0603 #1608Metric #43_2kOhm #1Percent #0_1W #PassiveComponents #EmbeddedSystems

Quad Low-Power Operational Amplifier – General-purpose rail-to-rail input/output op amp with 1 MHz gain-bandwidth product, operating from 1.8 V to 6 V. The Microchip MCP6004-I/P integrates four amplifier channels, with 0.6 V/µs typical slew rate, 1 pA typical input bias current, and 4.5 mV maximum input offset voltage. It is housed in a 14-pin PDIP package and operates from −40°C to +85°C. #Microchip #MCP6004 #OpAmp #OperationalAmplifier #RailToRail #LowPower #AnalogIC #SignalConditioning #EmbeddedSystems

High-Precision GNSS Receiver Module – Multi-constellation GNSS receiver with RTK base-station and rover functionality designed for precision positioning, surveying, robotics, navigation, and embedded GNSS applications. The u-blox NEO-M8P-2 supports GPS/QZSS, GLONASS, and BeiDou, with concurrent reception of up to 2 GNSS systems. It operates from 2.7–3.6 V, provides UART, USB, SPI, and I²C interfaces, and has a 1.575 GHz RF frequency with −160 dBm sensitivity. The module measures approximately 12.2 × 16.0 × 2.4 mm and operates from −40°C to +85°C. #uBlox #NEOM8P2 #GNSS #GPS #RTK #GNSSReceiver #PrecisionPositioning #Navigation #EmbeddedSystems #Robotics

EEPROM Memory IC 2Kbit I2C 400 kHz 900 ns SOT-23-5 EEPROM memory providing 2 Kbit (256 × 8) nonvolatile data storage over an I²C-compatible serial interface. It operates from a 2.5 V to 5.5 V supply, supports up to 400 kHz clock frequency, and features a 16-byte page write buffer, self-timed erase/write cycles, and more than 1 million erase/write cycles with data retention exceeding 200 years. #EEPROM #SerialEEPROM #I2C #NonVolatileMemory #2Kbit #256x8 #Microchip #EmbeddedSystems #PCBLibrary #SOT23

RS-485 Half-Duplex Transceiver – Auto-direction RS-422/RS-485 transceiver supporting data rates up to 12 Mbps. The Texas Instruments THVD1426DRLR operates from a 3 V to 5.5 V supply, supports up to 256 bus nodes, and provides ±12 kV IEC 61000-4-2 contact ESD protection and ±16 V bus-fault protection. It features a 1/8 unit load, fail-safe receiver operation, and operates from −40°C to +125°C in an 8-pin SOT-5X3 (DRL) package. #TexasInstruments #THVD1426DRLR #RS485 #RS422 #Transceiver #HalfDuplex #IndustrialCommunication #SerialCommunication #ESDProtection #EmbeddedSystems

3-Position Surface-Mount DIP Switch – 3-position SPST recessed slide DIP switch for PCB configuration, address selection, and hardware option setting. Features a 1.27 mm pitch, surface-mount (SMD) gull-wing termination, 24 VDC / 25 mA contact rating, black recessed slide actuator, and 6-pin compact package (5.4 × 5.4 mm). Offers 100 mΩ maximum contact resistance, 100 MΩ minimum insulation resistance, 500 VAC dielectric strength (1 minute), 3,000-cycle mechanical life, and is specified for operation over a −40°C to +85°C temperature range. RoHS compliant. #YE #DSHP03TSGET #DIPSwitch #SlideSwitch #SPST #3Position #SMD #SurfaceMount #ConfigurationSwitch #AddressSwitch #EmbeddedSystems #RoHS

Silicon Carbide (SiC) Schottky Diode Array – Dual common-cathode 1200 V Silicon Carbide (SiC) Schottky rectifier optimized for solar inverters, EV chargers, UPS systems, power factor correction (PFC), industrial motor drives, and high-efficiency switch-mode power supplies (SMPS). Features a 1200 V repetitive reverse voltage, 17 A average forward current per diode (34 A total device), and 1.65 V maximum forward voltage at 5 A, delivering virtually zero reverse recovery charge for extremely low switching losses and reduced EMI. Built on Infineon's 5th Generation CoolSiC™ technology, it provides fast switching (<500 ns), excellent surge current capability (140 A), low reverse leakage current (40 µA at 1200 V), high thermal performance, and temperature-independent switching characteristics. Rated for operation over a −55°C to +175°C junction temperature range and housed in a TO-247-3 through-hole package. #Infineon #IDW10G120C5BFKSA1 #CoolSiC #SiCSchottkyDiode #SchottkyRectifier #1200V #PowerElectronics #SolarInverter #MotorDrive #PFC #SMPS #EmbeddedSystems

AC-DC Enclosed PCB Power Supply Module – 90 W enclosed AC-DC power supply for industrial equipment, automation systems, instrumentation, IoT devices, and embedded power applications. Accepts a universal 85–305 VAC (120–430 VDC) input and provides a regulated 24 VDC output at 3.75 A with 90 W maximum output power. Features high efficiency up to 92%, low no-load power consumption (<0.1 W), Class II isolation, reinforced insulation, and 3 kVAC input-to-output isolation. Includes short-circuit, overload, overvoltage, and overtemperature protection, complies with IEC/UL/EN 62368-1 and IEC/EN 60335-1 safety standards, and operates over a −30°C to +70°C temperature range (with derating). Housed in a fully encapsulated PCB-mount package measuring approximately 87 × 52 × 29.5 mm. (meanwell.com) #MeanWell #IRM9024 #IRM90 #ACDCPowerSupply #PCBPowerModule #24VPowerSupply #90W #IndustrialPower #EmbeddedPower #PowerManagement #EncapsulatedPowerSupply #EmbeddedSystems

PIC PIC® XLP™ 16F Microcontroller IC 8-Bit 32MHz 28KB (16K x 14) FLASH 28-UQFN (4x4) 8-bit PIC microcontroller for embedded control applications, operating from a 1.8 V to 3.6 V supply with a maximum CPU frequency of 32 MHz. It integrates 28 KB Flash, 2 KB RAM, 256 bytes EEPROM, a 12-bit ADC with up to 20 channels, 5-bit DAC, SPI, I²C, and EUSART interfaces, 24 GPIOs, LCD controller support, multiple timers, PWM, comparators, and Core Independent Peripherals in a 28-pin UQFN package. #Microcontroller #8BitMCU #PIC16LF19156 #Microchip #EmbeddedSystems #FlashMCU #LowPower #12BitADC #SPI #I2C #EUSART #PWM #LCDController #UQFN28 #PCBLibrary