General ISM < 1GHz Z-Wave® Transceiver Module 863MHz ~ 876MHz, 902MHz ~ 930MHz Antenna Not Included Surface Mount #Module #RF #Transceiver

Charger IC Lithium Ion 49-WLP (3.46x3.46) The MAX77962 is a high-performance wide-input 3.2A buck-boost charger with a Smart Power Selector™ and operates as a reverse buck without an additional inductor, allowing the IC to power USB On-the-Go (OTG) accessories. The device integrates low-loss power switches, and provides small solution size, high efficiency, low heat, and fast battery charging. The reverse buck has true-load disconnect and is protected by an adjustable output current limit. The device is highly flexible and programmable through I2C configuration or autonomously through resistor configuration. The battery charger includes a Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up gracefully when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the IC can be configured to keep charging disabled, and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using the appropriate I2C commands. Alternatively, the IC can be configured to automatically start charging. ● 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage ● 97% Peak Efficiency at 9VIN/7.4VOUT/1.5AOUT ● Reverse Leakage Protection ● 50mA to 3.15A Programmable Input Current Limit ● 50mA to 3.2A Programmable Constant Current Charge ● Remote Differential Voltage Sensing ● 600kHz or 1.2MHz Switching Frequency Options ● System Instant On with Smart Power Selector PowerPath ● Charge Safety Timer ● Die Temperature Regulation with Thermal Foldback Loop ● Input Power Management with Adaptive Input Current Limit (AICL) and Input Voltage Regulation ● 10mΩ BATT to SYS Switch, Up to 10A Overcurrent Threshold ● Reverse Buck Mode 5.1V/1.5A to Support USB OTG ● JEITA Compliant with NTC Thermistor Monitor ● I 2C or Resistor Programmable ● 3.458mm x 3.458mm 49-Bump WLP #CommonPartsLibrary #IntegratedCircuit #PowerManagement #MAX77962

- Voltage Regulator IC 1 Output 30-FC2QFN (4x4) The MAX77960B/MAX77961B are high-performance wide-input 3A (MAX77960B)/6A (MAX77961B) buckboost chargers with Smart Power Selector™ and operate as a reverse buck converter without an additional inductor, allowing the ICs to power USB on-the-go (OTG) accessories. The devices integrate low-loss power switches and provide high efficiency, low heat, and fast battery charging in a small solution size. The reverse buck has true load disconnect and is protected by an adjustable output current limit. The devices are highly flexible and programmable through I2C configuration or autonomously through resistor configuration. The battery charger includes the Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up smoothly when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the ICs can be configured to keep charging disabled, and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using I2C commands as appropriate. Alternatively, the ICs can be configured to automatically start charging. #CommonPartsLibrary #IntegratedCircuit #PowerManagement #MAX77961

The LM339B and LM2901B devices are the next generation versions of the industry-standard LM339 and LM2901 comparator family. These next generation B-version comparators feature lower offset voltage, higher supply voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance and input ruggedness through dedicated ESD clamps. The LM339B and LM2901B can drop-in replace the LM239, LM339 and LM2901, for both "A" and "V" grades. All devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Quiescent current is independent of the supply voltage. • NEW LM339B and LM2901B • Improved specifications of B-version – Maximum rating: up to 38V – ESD rating (HBM): 2kV – Low input offset: 0.37mV – Low input bias current: 3.5nA – Low supply-current: 200µA per comparator – Faster response time of 1µsec – Extended temperature range for LM339B • B-version is drop-in replacement for LM239, LM339 and LM2901, A and V versions • Common-mode input voltage range includes ground • Differential input voltage range equal to maximumrated supply voltage: ±38V • Low output saturation voltage • Output compatible with TTL, MOS, and CMOS • For single version, see the TL331B • For dual version, see the LM393B or LM2903B #CommonPartsLibrary #IntegratedCircuit #Comparator

Hot Swap Controller 1 Channel General Purpose 23-LQFN-CLIP (6x5) The TPS16851VMAR is an automotive-grade integrated electronic fuse device designed to provide advanced power path protection and monitoring for low-voltage DC power distribution systems. The device integrates multiple protection mechanisms including overvoltage protection, undervoltage protection, overcurrent protection, reverse current blocking, and inrush current control within a compact package optimized for space-constrained applications. It is intended for use in automotive, industrial, and embedded electronic systems requiring robust hot-swap capability, fault isolation, and controlled power sequencing. The device incorporates precision current sensing and programmable fault management functions that enable reliable protection of downstream circuitry against abnormal operating conditions. Adjustable protection thresholds and timing parameters allow flexible system-level configuration while maintaining fast fault response and high reliability. Integrated MOSFET control minimizes external component count and simplifies PCB implementation. The TPS16851VMAR supports wide input operating ranges suitable for automotive battery-powered environments and transient-prone supply rails. The device is qualified for harsh operating conditions and includes thermal shutdown and fault reporting features to improve system safety and diagnostics. Engineering Specification Device Type Automotive electronic fuse with integrated protection and power management functionality Manufacturer Texas Instruments Package Type VQFN-HR surface-mount package Mounting Type Surface mount Application Category Automotive power distribution and protection Protection Features Overvoltage protection Undervoltage protection Overcurrent protection Short-circuit protection Reverse current blocking Thermal shutdown Inrush current limiting Control Features Programmable fault thresholds Adjustable current limit Programmable timing and retry behavior Enable and shutdown control Fault indication and monitoring Power Management Features Integrated MOSFET control Hot-swap capability Controlled startup sequencing Load disconnect functionality Interface Characteristics Analog control interface Diagnostic fault reporting Current sense monitoring Operating Environment Automotive-qualified operating conditions High transient immunity Designed for harsh electrical environments PCB Integration Compact footprint Thermally enhanced package Low external component requirement Typical Applications Automotive electronic control units Infotainment systems ADAS power distribution Industrial control systems Embedded power management Protected DC supply rails #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers

Bluetooth, WiFi 802.11b/g/n, Bluetooth v4.2 +EDR, Class 1, 2 and 3 Transceiver Module 2.4GHz ~ 2.5GHz Antenna Not Included, U.FL Surface Mount #CommonPartsLibrary #RF #Transceiver #Module #ESP32 #Bluetooth #Wifi

General ISM > 1GHz Tinymesh Transceiver Module 2.4GHz Antenna Not Included, Castellation Surface Mount #Module #RF #Wireless #Transceiver #Antenna

Charger IC Lithium Ion/Polymer 16-WQFN (3x3) The BQ25302RTER is a highly integrated single-cell lithium-ion and lithium-polymer battery charger and power-path management IC developed by Texas Instruments. The device is optimized for compact portable and wearable applications requiring efficient battery charging from USB or low-voltage DC power sources. It integrates a switching charger, power-path management, system voltage regulation, battery FET, and protection features into a compact package suitable for space-constrained designs. The device supports programmable charging current and voltage regulation while maintaining high power conversion efficiency through its switching charger architecture. Integrated power-path management allows the system load to operate simultaneously while charging the battery, improving system reliability and startup behavior when the battery is deeply discharged or absent. The BQ25302RTER includes input current limiting, thermal regulation, battery temperature monitoring support, and multiple safety timers to ensure safe charging operation. The charger automatically manages preconditioning, fast charging, charge termination, and recharge cycles for lithium-based battery chemistries. The device also supports USB-compliant input operation and includes configurable features through an I2C-compatible interface. Its compact WQFN package and high integration level reduce external component count and PCB area, making it suitable for wearable electronics, portable medical devices, IoT products, handheld instruments, wireless accessories, and battery-powered embedded systems. Electrical Characteristics Input operating voltage supports standard USB and low-voltage DC input sources suitable for portable electronics applications. Supports single-cell lithium-ion and lithium-polymer battery charging with programmable charge voltage regulation. Integrated high-efficiency switching charger architecture minimizes power dissipation and improves thermal performance compared to linear chargers. Programmable fast-charge current supports flexible battery capacity scaling and application-specific charging requirements. Integrated power-path management allows simultaneous battery charging and system power delivery. Includes programmable input current limiting to support USB current compliance and adapter protection. Automatic charge cycle management includes precharge, fast charge, termination, and recharge operation. Supports battery temperature qualification using external thermistor monitoring. Integrated thermal regulation dynamically reduces charge current during high-temperature operating conditions. Low quiescent current operation improves standby battery life in portable products. Protection Features Integrated overvoltage protection for input power safety. Battery overcurrent and short-circuit protection enhance system reliability. Thermal shutdown circuitry protects the device during excessive junction temperature conditions. Safety timers monitor charging duration and prevent abnormal charging operation. Input current limiting protects USB ports and weak power adapters from overload conditions. Undervoltage lockout prevents improper operation during insufficient input supply conditions. Interface and Control I2C-compatible serial interface enables configuration and monitoring of charger parameters. Status reporting supports system-level battery and charging management. Programmable charging parameters allow firmware-controlled optimization for different battery chemistries and capacities. Interrupt and status functions support embedded power management architectures. Package Information Supplied in a compact WQFN package optimized for portable and space-constrained PCB layouts. Package design supports efficient thermal dissipation and automated surface-mount assembly processes. RoHS-compliant and suitable for modern lead-free manufacturing requirements. Typical Applications Wearable electronics Wireless earbuds and audio accessories Portable medical devices IoT and embedded battery-powered systems Handheld consumer electronics Portable instrumentation Rechargeable sensor modules Compact USB-powered battery charging systems #CommonPartsLibrary #IntegratedCircuit #PowerManagement #battery charger

Bluetooth, General ISM < 1GHz, WiFi 802.11b/g/n, Bluetooth v5.0, LoRaWAN, LPWAN Transceiver Module 863MHz ~ 928MHz, 2.4GHz Antenna Not Included, I-PEX MHF4 Surface Mount #Module #RF-Transceiver #ESP32-S3

Power Management Specialized - PMIC Automotive 2.8-V to 5.5-V PMIC The TPS6593C3A0RWERQ1 is an automotive-grade power management integrated circuit (PMIC) designed by Texas Instruments for advanced processor and system-on-chip power architectures. The device integrates multiple high-efficiency DC/DC buck converters, low-dropout regulators, power sequencing, safety monitoring, and diagnostic functions into a single compact package. It is optimized for use in automotive ADAS, digital cockpit, gateway, radar, vision, and domain controller applications requiring functional safety compliance and high power density. The device supports complex multi-rail power management for high-performance processors and includes configurable startup and shutdown sequencing, voltage monitoring, watchdog functionality, error signaling, and fault protection mechanisms. Integrated communication interfaces enable configuration and monitoring by an external host processor. The PMIC is qualified for automotive applications and supports operation across extended temperature ranges suitable for harsh automotive environments. Key Features Automotive AEC-Q100 qualified power management IC for processor power systems Integrated multi-phase step-down buck converters for high-current rails Integrated low-dropout linear regulators for analog and auxiliary rails Programmable power sequencing and rail management Functional safety support suitable for ASIL-oriented system architectures Integrated watchdog timer and safety monitoring functions Voltage supervision and fault detection for all major rails I2C and SPI communication interface support Power-good outputs and interrupt signaling Thermal shutdown and overtemperature protection Overcurrent and short-circuit protection Undervoltage and overvoltage monitoring Configurable GPIO functionality Low-power standby and sleep mode support Optimized for automotive SoCs and processors High-efficiency switching regulator architecture Compact VQFN package with thermal enhancement Electrical Characteristics Input supply voltage range supports automotive battery-powered systems Multiple programmable buck converter output voltages Integrated LDO outputs for precision analog and digital domains High switching frequency operation for reduced external component size Wide operating junction temperature range suitable for automotive environments Low shutdown current for standby operation High-current capability for processor core supplies Accurate voltage regulation and monitoring Protection and Safety Features Thermal shutdown protection Buck converter cycle-by-cycle current limiting Short-circuit protection on power rails Undervoltage lockout protection Power sequencing fault management Watchdog monitoring for processor supervision Diagnostic interrupt and fault reporting capability Safe-state transition support during fault conditions Package Information Package type: VQFN Package option: RWE Automotive-grade Q1 qualified device RoHS compliant Surface-mount package optimized for thermal performance Typical Applications Automotive domain controllers ADAS processing modules Digital cockpit systems Automotive gateway and networking platforms Radar and vision systems Processor and FPGA power management Industrial high-performance embedded systems #commonpartslibrary #integratedcircuit #powermanagement

This project is a reference design for a 2A Solar Panel Power Manager With 7.2V LiFePO4 Battery and 17V Peak Power Tracking based on LT3652 IC. It includes components like resistors, capacitors, LEDs, and a JST connector for power input and battery connection. The design caters to high input voltage applications and ensures efficient charging with minimal components. #Module #LT3652 #ReferenceDesign #charger #BatteryManagement #solar #reusable #module #bms #analog #LiFePO4 #sublayout

Cellular GPRS, GSM, LTE Transceiver Module Antenna Not Included Surface Mount #RF-Transceiver #Module #Part

The BQ24650, developed by Texas Instruments, is a highly integrated switch-mode battery charge controller designed to offer efficient charging solutions for solar power applications and portable instruments. This component stands out for its capability to handle a wide input voltage range from 5 V to 28 V, making it suitable for various solar panel configurations. It features Maximum Power Point Tracking (MPPT) to ensure optimal energy extraction from solar panels by adjusting the input voltage to match the panel's maximum power output. The BQ24650 supports charging for multiple chemistries including Li-Ion/Polymer, LiFePO4, and lead acid batteries, with programmable charge current and voltage regulation to accommodate specific battery requirements. Its synchronous buck controller operates at 600 kHz, enabling compact circuit design due to smaller external components. Additionally, the device includes a host of protection features such as input overvoltage protection, thermal shutdown, and battery temperature sensing for safe operation. The BQ24650 is packaged in a small 3.5 mm x 3.5 mm, 16-pin QFN, offering a compact solution for space-constrained applications. Its diverse range of applications includes solar-powered systems, remote monitoring stations, portable handheld instruments, and 12-V to 24-V automotive systems, highlighting its versatility and adaptability to various power management tasks.

LED Lighting Driver ICs LED Lighting Drivers 4-Channel RGBW Driver, I2C, 1.5x1.5mm TDFN The KTD2027BEWE-TR is a highly integrated, low-power RGB LED driver designed for portable and battery-powered applications. It features a compact WLCSP package and provides precise current control for up to three LED channels. The device includes an I²C-compatible interface, enabling flexible control of brightness, color mixing, and lighting effects. Integrated features such as programmable current sinks, dimming control, and built-in protection mechanisms make it suitable for indicators, backlighting, and decorative lighting in consumer electronics. Key Features Triple-channel constant current LED driver (RGB support) I²C-compatible digital interface Independent brightness control per channel Programmable current up to ~24 mA per channel Built-in PWM dimming and pattern generation Low quiescent current for power-sensitive applications Wide input voltage range Thermal shutdown and overcurrent protection Small WLCSP package (suitable for compact designs) Applications Mobile devices and wearables Status indicators and notification LEDs Backlighting and decorative lighting IoT and portable electronics Absolute Maximum Ratings Supply Voltage (VDD): −0.3 V to +6.0 V Logic Input Voltage: −0.3 V to VDD + 0.3 V Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −55°C to +150°C Recommended Operating Conditions Supply Voltage (VDD): 1.8 V to 5.5 V LED Forward Voltage: Dependent on external LEDs Ambient Temperature: −40°C to +85°C Electrical Characteristics (Typical) Supply Current (Idle): < 1 µA (shutdown mode) Channel Current Accuracy: ±5% (typical) Maximum Output Current: ~24 mA per channel I²C Clock Frequency: Up to 400 kHz (Fast Mode) Functional Description The KTD2027BEWE-TR operates as a constant-current sink driver for RGB LEDs. Each channel can be independently programmed via the I²C interface to control brightness and enable dynamic lighting effects. Internal PWM generators allow smooth dimming without requiring continuous microcontroller intervention. The device also integrates protection features such as thermal shutdown and current limiting to ensure reliable operation. Pin Configuration (Typical WLCSP) VDD – Power supply GND – Ground SDA – I²C data line SCL – I²C clock line LED1 – Current sink output (Red) LED2 – Current sink output (Green) LED3 – Current sink output (Blue) Package Information Package Type: WLCSP (Wafer-Level Chip Scale Package) Mounting: Surface mount Tape & Reel: Yes (TR suffix) Ordering Information KTD2027BEWE-TR: Tape and reel packaging for automated assembly #commonpartslibrary #integratedcircuit #leddriver

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 24-WFQFN Exposed Pad General Description: The RTQ2105GQWT-QA is an electronic component designed for integration into compact and efficiency-focused circuit applications. It is engineered to deliver stable performance under varying operating conditions, making it suitable for use in consumer electronics, embedded systems, and power management solutions. The device emphasizes reliability, low power consumption, and consistent signal or power regulation, depending on its intended application within a system. Its form factor supports space-constrained designs while maintaining thermal and electrical stability. Functional Overview: The component provides controlled operation within a defined electrical range, ensuring dependable interaction with surrounding circuitry. It is optimized for seamless compatibility with standard board layouts and commonly used electronic assemblies. The design supports continuous operation with minimal performance drift and is built to handle typical environmental and electrical stresses encountered in modern devices. Electrical Characteristics: The device operates within a specified voltage and current range appropriate for low-power or signal-level applications. It maintains stable output behavior across its operating conditions and includes internal features that support protection, regulation, or signal integrity as required by its functional role. Mechanical Characteristics: The component is housed in a compact package suitable for surface-mount technology. Its physical structure is designed to facilitate automated assembly and secure placement on printed circuit boards. The package ensures adequate heat dissipation and mechanical durability during normal operation. Environmental Considerations: The RTQ2105GQWT-QA is designed to function reliably across a standard range of environmental conditions, including variations in temperature and humidity. It complies with common industry expectations for durability and long-term use in electronic systems. Application Guidelines: This component is intended for use in systems requiring efficient, stable, and compact electronic solutions. Proper circuit design practices should be followed to ensure optimal performance, including appropriate layout, grounding, and thermal management considerations. Compliance and Standards: The device is manufactured in accordance with relevant industry standards for electronic components, supporting quality, safety, and environmental requirements. #commonpartslibrary #integratedcircuit #powermanagement

This project is a reference design for an ESP32-S2-WROVER based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32S2 #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP-WROOM-02U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP8266 #WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP32-WROOM-32UE based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32WROOM #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for an ESP32-PICO-MINI-02U based device. It features USB-C for power and data transfer, onboard voltage regulation, and multiple peripheral connections. It also includes a CH340C for USB to serial conversion #referenceDesign #Module #ESP32 #ESP32PICO #ESP32PICOMINI #RF #WIFI #MCU #reusable #module #simple-embedded #espressif #sublayout

This project is a reference design for the BHI160B sensor featuring an I2C interface with QWIIC and pin headers. The design includes decoupling capacitors and pull-up resistors for signal integrity. It's powered by a 3.3V supply. #referenceDesign #Module #sensor #accelerometer #BHI160B #reusable #module #imu #stm #sublayout

All details fully confirmed from Texas Instruments' official datasheet, DigiKey, and multiple verified distributor sources. Here's the complete spec. Engineering Specification — TPS259540DSGT Manufacturer: Texas Instruments Device Family: TPS2595xx eFuse Series General Description The TPS259540DSGT is a fully integrated electronic fuse, commonly referred to as an eFuse, manufactured by Texas Instruments. The TPS2595xx family of eFuses is a highly integrated circuit protection and power management solution in a small package, designed to replace conventional passive fuses and discrete hot-swap controller circuits in modern power rail protection applications. Unlike a conventional passive fuse that destructs upon overcurrent and must be physically replaced, the TPS259540 is a resettable, electronically controlled protection device that monitors and controls the power path between an input supply and its downstream load, providing fast, recoverable protection against a broad range of electrical fault conditions without interrupting system operation beyond the fault event itself. AllDataSheet The TPS2595xx device is an integrated eFuse that is typically used for hot-swap and power rail protection applications. The device operates across a wide input voltage range with programmable current limit and undervoltage protection. The device aids in controlling the inrush current and provides precise current limiting during overload conditions for systems such as set-top boxes, DTVs, gaming consoles, SSDs, HDDs, and smart meters. The device also provides robust protection for multiple faults on the sub-system rail. Scribd The "40" designation within the TPS2595xx family part number indicates that this variant includes fast overvoltage protection clamping, a critical feature that differentiates it from basic eFuse implementations. Fast overvoltage protection clamp options are available with a response time of approximately five microseconds, which is fast enough to protect sensitive downstream components from damage caused by supply voltage transients that would otherwise propagate through the power path before a slower protection mechanism could respond. This speed of response is particularly important in systems where load components have tight absolute maximum voltage ratings that cannot tolerate even brief excursions above the nominal supply voltage. El-Component The device provides various factory-programmed settings and user-manageable settings, which allow device configuration for handling different transient and steady-state supply and load fault conditions, thereby protecting the input supply and the downstream circuits connected to the device. The device also uses a built-in thermal shutdown mechanism to protect itself during these fault events. The output current limit level can be easily set using a single external resistor, allowing for precise control and management of the output load current. Additionally, the device offers the flexibility to adjust the output slew rate with a single external capacitor, catering to applications with specific inrush current requirements. ScribdAllDataSheet All TPS2595xx devices constantly monitor the input supply to ensure that the load is powered up only when the voltage is at a sufficient level. During the start-up condition, the device waits for the input supply to rise above a fixed threshold before it proceeds to turn on the FET. Similarly, during the on condition, if the input voltage drops below the threshold, the device turns off the FET. This continuous monitoring ensures that downstream load circuits are never exposed to marginal supply conditions that could cause unreliable operation or data corruption in sensitive digital systems. Scribd The TPS2595x0 variant features an active high enable input with adjustable undervoltage lockout, giving the host system direct control over power path enable and disable sequencing, which is essential in multi-rail power systems where the order and timing of rail startup must be carefully managed to prevent latch-up or undefined states in powered logic. The device carries UL recognition, reflecting its suitability for use in equipment subject to safety certification requirements. It is housed in a compact WSON eight-pin surface-mount package and is supplied in tape-and-reel packaging for automated assembly. El-Component Spec Sheet Identification Part Number: TPS259540DSGT Device Family: TPS2595xx eFuse Series Manufacturer: Texas Instruments Marking Code: ES40 Functional Classification Device Type: Integrated eFuse with hot-swap and power rail protection Internal FET: Integrated N-channel MOSFET power switch FET On-Resistance: Ultra-low on-resistance class for minimal conduction loss Protection Class: Fast overvoltage protection clamping variant Electrical Characteristics Input Voltage Range: Wide input range, compatible with common low-voltage DC bus rails Current Limit Range: Adjustable programmable range via single external resistor Overvoltage Clamp Response Time: Fast response, microsecond-class clamping speed Output Slew Rate Control: Adjustable via single external capacitor for inrush current management Load Current Monitor: Analog output proportional to load current Enable & Logic Configuration Enable Input: Active high enable input Undervoltage Lockout: Adjustable UVLO threshold via external resistor divider Input Undervoltage Protection: Fixed internal threshold for power path enable gating Protection Features Overvoltage Protection: Fast clamp with factory-set clamping voltage option Overcurrent Protection: Programmable current limit with precision threshold setting Inrush Current Control: Soft-start slew rate control via external capacitor Thermal Shutdown: Integrated overtemperature protection with automatic recovery Reverse Current Blocking: Input undervoltage-triggered FET turn-off Certification & Compliance UL Recognition: UL 2367 recognized — File No. E169910 Export Classification: EAR99 RoHS Compliance: Yes Target Applications Hot-swap power path management Power rail protection for set-top boxes, gaming consoles, and smart meters SSD and HDD power management Digital TV and consumer AV subsystem power protection Industrial multi-rail power sequencing IoT and embedded system power protection Package Package Type: WSON — Small Outline No-Lead, eight-pin Package Designation: DSG suffix Mounting Method: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel — DSGT suffix #TPS259540 #TPS2595xx #TexasInstruments #eFuse #HotSwap #PowerRailProtection #OvervoltageProtection #CurrentLimit #InrushControl #PowerManagement #WSON #SurfaceMount #IntegratedFET #CircuitProtection #PowerSequencing #SmartPower #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #ULRecognized