Automotive OBD2 data logger based on ESP32-S3-WROOM-2 with robust 12–24V input protection, USB-C, CAN transceiver, microSD storage, RTC, and expansion ports.

Humidity, Temperature 0 ~ 100% RH I2C ±2% RH 8 s Surface Mount The SHTC3-TR-2.5KS is a digital humidity and temperature sensor from Sensirion, designed for high accuracy, low power consumption, and compact integration. It utilizes a fully calibrated capacitive humidity sensor and bandgap temperature sensor, providing precise environmental measurements via an I²C interface. The device is optimized for battery-powered and space-constrained applications, featuring ultra-low power consumption and sleep modes, making it ideal for IoT, wearable, and mobile devices. Key Features Relative humidity and temperature sensing in a single package Fully calibrated and linearized digital output I²C interface (up to 1 MHz fast mode) Ultra-low power consumption with sleep mode High accuracy and fast response time Small DFN package for compact designs Factory calibrated, no external calibration required Mechanical Characteristics Package Type: DFN (Dual Flat No-Lead) Package Size: ~2.0 mm × 2.0 mm × 0.75 mm Mounting Type: Surface mount (SMT) Terminals: Bottom pads Electrical Characteristics Supply Voltage (VDD): 1.62 V to 3.6 V Average Supply Current: Measurement: ~170 µA Sleep Mode: ~0.3 µA Interface: I²C (address selectable) Output: Digital (temperature and relative humidity) Sensing Performance Humidity Range: 0 to 100 %RH Humidity Accuracy: ±2 %RH (typical) Temperature Range: -40°C to +125°C Temperature Accuracy: ±0.2°C (typical) Response Time (τ63%): ~8 seconds (humidity) Functional Features Low-power measurement modes (normal and low power) Sleep mode for minimal energy consumption CRC checksum for data integrity Clock stretching support (optional) Environmental Specifications Operating Temperature Range: -40°C to +125°C Storage Temperature Range: -40°C to +125°C Packaging Information Packaging Type: Tape & Reel (TR) Reel Quantity: 2,500 units (2.5KS) Lead-Free / RoHS compliant Typical Applications Wearable devices Smartphones and mobile electronics IoT sensors and nodes Smart home devices (thermostats, air quality monitors) HVAC systems Environmental monitoring #CommonPartsLibrary #Sensor #Transducer #Humidity #Moisture-Sensor

Voltage Level Translator Bidirectional 1 Circuit 8 Channel 60Mbps 20-TSSOP This device is an 8-bit non-inverting level translator which uses two separate configurable power-supply rails. The A port tracks the VCCA pin supply voltage. The VCCA pin accepts any supply voltage between 1.4V and 3.6V. The B port tracks the VCCB pin supply voltage. The VCCB pin accepts any supply voltage between 1.65V and 5.5V. Two input supply pins allows for low Voltage bidirectional translation between any of the 1.5V, 1.8V, 2.5V, 3.3V, and 5V voltage nodes. When the output-enable (OE) input is low, all outputs are placed in the high-impedance (Hi-Z) state. To put the device in the Hi-Z state during power-up or power-down periods, tie OE to GND through a pulldown resistor. The current-sourcing capability of the driver determines the minimum value of the resistor. • No direction-control signal needed • Maximum data rates: – 110Mbps (push pull) – 1.2Mbps (open drain) • 1.4V to 3.6V on A port and 1.65V to 5.5V on B port (VCCA ≤ VCCB) • No power-supply sequencing required – either VCCA or VCCB can be ramped first • Latch-up performance exceeds 100mA per JESD 78, class II • ESD protection exceeds JESD 22 (A port): – 2000 V Human Body Model (A114-B) – 150 V Machine Model (A115-A) – 1000 V Charged-Device Model (C101) • IEC 61000-4-2 ESD (B-port): – ± 8kV Contact Discharge – ± 6kV Air Discharge #commonpartslibrary #integratedcircuit #logic #translator #levelshifter

Cellular EDGE, GPRS, GSM, HSPA+, LTE, UMTS Transceiver Module 900MHz, 1.8GHz Antenna Not Included Surface Mount The SIM7600E-H is a multi-mode LTE module that supports: LTE (4G) Cat-4 with up to 150 Mbps download / 50 Mbps upload 3G (UMTS/HSPA+) 2G (GSM/GPRS/EDGE) fallback for global network compatibility It is built in a compact SMT/LCC package (about 30 × 30 mm) and is widely used for embedded devices that need mobile internet and GNSS positioning Key Features Network support LTE-FDD / LTE-TDD (global bands depending on variant) UMTS/HSPA+ GSM/GPRS/EDGE fallback Data speed LTE Cat-4: up to 150 Mbps downlink 3G/2G fallback for lower-speed connectivity GNSS built-in GPS / GLONASS / other satellite positioning support Interfaces USB 2.0 UART GPIO I2C ADC PCM (audio support) SIM card interface Software / protocols AT command control TCP/IP, UDP, HTTP, HTTPS, FTP, DNS Driver support for Windows, Linux, Android Power supply ~3.4V to 4.2V typical operating range Operating temperature -40°C to +85°C (industrial grade) Typical Applications IoT devices GPS trackers Smart metering Industrial routers / gateways Remote monitoring systems Vehicle telematics Point-of-sale terminals #commonpartslibrary #rf #wireless #transceiver #module

Accelerometer X, Y, Z Axis ±2g, 4g, 8g, 16g 0.05Hz ~ 1.6kHz 14-LGA (3x5) The ADXL345 is a small, thin, ultralow power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface. The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (3.9 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free-fall sensing detects if the device is falling. These functions can be mapped individually to either of two interrupt output pins. An integrated memory management system with a 32-level first in, first out (FIFO) buffer can be used to store data to minimize host processor activity and lower overall system power consumption. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. The ADXL345 is supplied in a small, thin, 3 mm × 5 mm × 1 mm, 14-lead, plastic package. ► Ultralow power: as low as 23 µA in measurement mode and 0.1 µA in standby mode at VS = 2.5 V (typical) ► Power consumption scales automatically with bandwidth ► User-selectable resolution ► Fixed 10-bit resolution ► Full resolution, where resolution increases with g range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all g ranges) ► Embedded memory management system with FIFO technology minimizes host processor load ► Single tap/double tap detection ► Activity/inactivity monitoring ► Free-fall detection ► Supply voltage range: 2.0 V to 3.6 V ► I/O voltage range: 1.7 V to VS ► SPI (3- and 4-wire) and I2C digital interfaces ► Flexible interrupt modes mappable to either interrupt pin ► Measurement ranges selectable via serial command ► Bandwidth selectable via serial command ► Wide temperature range (−40°C to +85°C) ► 10,000 g shock survival ► Pb free/RoHS compliant #commonpartslibrary #sensor #transducer #accelerometer

Bluetooth, WiFi 802.11b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-S3-WROOM-2-N32R16V is a powerful dual-core microcontroller module that integrates wireless connectivity, large memory, and hardware acceleration for AI and signal processing tasks. It is particularly suited for applications requiring edge AI, voice recognition, and high-speed data processing, while still maintaining low power consumption. Dual-core Xtensa LX7 CPU Up to 240 MHz Includes vector instructions for AI and DSP workloads Wi-Fi 2.4 GHz (802.11 b/g/n) Bluetooth 5 (LE) N32 → 32 MB external Flash R16 → 16 MB PSRAM Built for memory-intensive applications #commonpartslibrary #transceiver #wireless #rf

SDRAM - Mobile LPDDR4X Memory IC 8Gbit Parallel 2.133 GHz 200-FBGA (10x15) The IM8G32L4JCBG-046I is an 8Gb (1GB) LPDDR4X SDRAM memory device designed for high-performance, low-power embedded applications. Organized as 256M × 32 bits, it delivers data rates up to 4266 MT/s, making it suitable for industrial computing, AI edge devices, networking equipment, automotive systems, and other memory-intensive applications. The LPDDR4X architecture reduces power consumption while maintaining high bandwidth and reliable operation across industrial temperature ranges. Key Features 8Gb (Gigabit) LPDDR4X SDRAM Memory organization: 256M × 32 bits High-speed operation up to 4266 MT/s Low-power LPDDR4X interface for reduced energy consumption 32-bit data bus width Industrial operating temperature range: –40°C to +95°C 200-ball FBGA package (10 mm × 15 mm) High bandwidth for demanding embedded applications Optimized for low-power and thermally constrained designs Suitable for industrial, automotive, networking, and edge AI systems #LPDDR4X #SDRAM #MemoryIC #EmbeddedSystems #IndustrialElectronics #EdgeComputing #AIoT #HighSpeedMemory #LowPowerDesign #AutomotiveElectronics #NetworkingHardware #FBGA #HardwareDesign #ElectronicsEngineering #PCBDesign #IntelligentMemory

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole USB Type-C receptacle 16 pin USB2.0 The USB4215-03-A is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a 16-pin configuration supporting reversible plug orientation with standard USB 2.0 differential data lines and configuration channel (CC) pins. The connector is intended for surface-mount PCB assembly with through-hole shell stakes for enhanced mechanical strength. It is widely used in compact embedded systems for power delivery, charging interfaces, and basic data communication. Key Features USB Type-C receptacle (USB 2.0 compliant) 16 functional pins (no SuperSpeed support) Reversible plug orientation Surface-mount contacts with through-hole shell tabs Compact, low-profile design High insertion cycle durability Suitable for automated assembly Electrical Characteristics Rated Current: VBUS: up to 5.0 A (depending on PCB design and cable) Signal pins: 0.25 A max Rated Voltage: 20 V DC max Contact Resistance: ≤ 40 mΩ Insulation Resistance: ≥ 100 MΩ Dielectric Withstanding Voltage: 100 V AC Mechanical Characteristics Mounting Type: Surface Mount (SMT) with Through-Hole Shield Tabs Number of Positions: 16 Mating Cycles: 10,000 cycles (typical) Insertion Force: 5–20 N Extraction Force: 8–20 N Material Specifications Contacts: Copper Alloy Contact Plating: Gold over Nickel Housing: High-temperature thermoplastic (UL94V-0) Shell: Stainless Steel Environmental Characteristics Operating Temperature Range: -25°C to +85°C Storage Temperature Range: -40°C to +85°C RoHS Compliant: Yes Halogen Free: Yes Pin Configuration (USB 2.0 Type-C) VBUS (Power) GND (Ground) D+ / D− (USB 2.0 differential pair) CC1 / CC2 (Configuration channel) SBU pins (optional/unused in USB 2.0 designs) Applications USB power input (5 V / USB-C PD trigger designs) Embedded systems and development boards Consumer electronics Charging interfaces Low-speed USB communication devices Packaging Tape & Reel for automated pick-and-place assembly Compliance & Standards USB Type-C Specification (USB 2.0 interface) RoHS / REACH compliant UL recognized materials #CommonPartsLibrary #Connector #USB-C

ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting CompactFlash™, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset, and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop, and Standby modes –VBAT supply for RTC, 20×32-bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #commonpartslibrary #integratedcircuit #microcontroller

USB Type-C USB 2.0 Receptacle Connector – Right-angle USB Type-C receptacle designed for consumer electronics, industrial controllers, IoT devices, embedded systems, charging equipment, portable products, and USB-enabled communication interfaces. The Same Sky (formerly CUI Devices) UJ20-C-H-G-SMT-2-P16-TR features a 24-contact (16 active + 8 dummy) USB Type-C interface supporting USB 2.0 data rates up to 480 Mbps. It is rated for 48 VDC, with 5 A on VBUS power contacts, 1.25 A on VCONN contacts, and 0.25 A on signal contacts. Designed with a surface-mount, right-angle configuration plus through-hole retention tabs, it provides enhanced mechanical strength for repeated cable insertion. Features include gold-plated contacts, shielded steel shell (SUS304), UL94 V-0 housing, 10,000 mating cycles, and an operating temperature range of −25°C to +85°C, making it ideal for reliable power and data connectivity in compact embedded designs. #SameSky #UJ20CHGSMT2P16TR #USBTypeC #USB20 #USBConnector #TypeCReceptacle #BoardToCable #SurfaceMountConnector #EmbeddedSystems #IndustrialElectronics #IoT #ConsumerElectronics

24 Bit Analog to Digital Converter 8 Input 8 Sigma-Delta 32-TQFP (5x5) The ADS131M08IPBSR is a high-precision, simultaneous-sampling analog-to-digital converter designed for multi-channel data acquisition systems requiring accurate and synchronized measurements. Manufactured by Texas Instruments, this device integrates eight differential input channels with low-noise performance, programmable gain amplification, and precision voltage reference support. The converter architecture is optimized for industrial automation, energy monitoring, medical instrumentation, and precision sensing applications where phase alignment and signal fidelity are critical. The device incorporates delta-sigma conversion technology with integrated digital filtering to provide high dynamic range and excellent noise performance across a wide operating bandwidth. It supports flexible data interface configurations through a high-speed SPI-compatible serial interface, enabling efficient communication with microcontrollers, DSPs, and FPGA-based systems. The integrated diagnostic and monitoring features improve system reliability and simplify fault detection in safety-critical applications. The ADS131M08IPBSR operates from low-voltage analog and digital supplies while maintaining low power consumption suitable for embedded and portable systems. The compact thermally enhanced package supports dense PCB layouts and reliable operation across industrial temperature environments. Engineering Specification Device Type: Simultaneous-Sampling Delta-Sigma Analog-to-Digital Converter Manufacturer: Texas Instruments Channel Configuration: Eight Differential Input Channels Resolution: Twenty-Four Bit ADC Architecture: Delta-Sigma Sampling Type: Simultaneous Sampling Input Type: Differential Analog Inputs Programmable Gain Amplifier: Integrated Data Output Interface: SPI-Compatible Serial Interface Reference Support: External Precision Voltage Reference Digital Filtering: Integrated Sinc Filter Architecture Operating Supply Voltage: Low-Voltage Analog and Digital Supplies Noise Performance: Low Noise Precision Measurement Capability Power Consumption: Optimized for Low Power Operation Diagnostics Features: Integrated Self-Monitoring and Fault Detection Temperature Range: Industrial Operating Temperature Range Package Type: TQFP Surface-Mount Package Mounting Type: Surface Mount Technology Application Areas: Energy Metering, Industrial Automation, Medical Instrumentation, Data Acquisition Systems, Multi-Channel Sensor Interfaces #commonpartslibrary #integratedcircuit #analog #digital #converter

ADXL345 iMEMS® Accelerometer, 3 Axis Sensor Evaluation Board The ADXL345 measures acceleration in three axes (X, Y, Z) and outputs digital data via either I²C or SPI interfaces. It is widely used in applications like tilt sensing, vibration monitoring, free-fall detection, and motion-based user interfaces. Its high resolution (up to 13-bit) allows it to detect very small changes in motion, making it suitable for both consumer electronics and industrial applications. Key Features 3-axis acceleration measurement (X, Y, Z) Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g High resolution (13-bit) with up to 4 mg/LSB sensitivity Digital output interfaces: I²C and SPI Low power consumption: ideal for battery-powered devices Built-in motion detection functions: Tap and double-tap detection Free-fall detection Activity and inactivity monitoring Wide bandwidth range: supports various data rates for different applications Operating voltage: typically 2.0V to 3.6V Compact package: small LGA form factor suitable for space-constrained designs Common Applications Smartphones and tablets (screen rotation, motion sensing) Wearable devices and fitness trackers Gaming controllers Robotics and drones Vibration and shock monitoring systems #commonpartslibrary #developmentboard #evaluationboard #sensor

CMOS BCD-to-7-Segment LED Latch Decoder Drivers 16-TSSOP -55 to 125 The CD4511BPWR is a CMOS BCD-to-7-segment latch decoder/driver IC from Texas Instruments designed to directly drive common-cathode 7-segment LED displays. It converts a 4-bit BCD (Binary-Coded Decimal) input into the appropriate 7-segment output signals for displaying decimal digits 0–9. The device integrates latch, decode, and display driver functions in a single package, making it suitable for digital clocks, counters, panel meters, calculators, and embedded display systems. Key Features CMOS BCD-to-7-segment latch decoder/driver Directly drives common-cathode LED displays High output source current capability up to 25 mA Built-in input latch for BCD data storage Lamp Test (LT) function for display testing Blanking Input (BI) for display blanking/intensity control Automatically blanks invalid BCD inputs (>1001) Wide operating supply voltage range: 3 V to 18 V Low static power consumption with high noise immunity Compatible with CMOS, NMOS, and TTL logic levels Available in TSSOP-16 package (BPWR variant) #commonpartslibrary #integratedcircuit #leddriver

Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41I-AD1B-R2 is a high-accuracy digital humidity and temperature sensor from Sensirion designed for industrial and harsh-environment applications requiring reliable environmental monitoring. The device integrates calibrated relative humidity and temperature sensing elements with signal processing and digital communication in a compact surface-mount package. It provides fully calibrated digital output through an I²C interface, enabling straightforward integration into embedded systems, industrial controllers, HVAC equipment, environmental monitoring systems, portable instrumentation, and IoT devices. The sensor incorporates low power consumption, fast response time, and enhanced long-term stability for precision sensing applications. Engineering Specification Manufacturer: Sensirion AG Manufacturer Part Number: SHT41I-AD1B-R2 Device Type: Digital Relative Humidity and Temperature Sensor Sensor Functions: Relative Humidity Measurement and Temperature Measurement Humidity Sensing Range: Full Relative Humidity Range Support Temperature Sensing Range: Wide Industrial Temperature Operating Range Humidity Accuracy: High-Precision Calibrated Measurement Temperature Accuracy: High-Precision Calibrated Measurement Output Interface: I²C Digital Serial Interface Supply Voltage: Low Voltage Operation Compatible with Embedded Systems Power Consumption: Ultra-Low Power Consumption Calibration: Factory Calibrated and Linearized Response Time: Fast Environmental Response Repeatability: High Measurement Repeatability Long-Term Stability: Optimized for Industrial Reliability Integrated Features: Signal Conditioning, Analog-to-Digital Conversion, Temperature Compensation, CRC Data Integrity Checking Package Type: Surface-Mount DFN Package Mounting Style: Surface Mount Technology Application Areas: Industrial Automation, HVAC Systems, Environmental Monitoring, Smart Sensors, Portable Devices, Data Loggers, IoT Equipment, Building Automation, Weather Monitoring Systems Compliance Features: RoHS Compliant and Halogen-Free Packaging Support #CommonPartsLibrary #Sensor #Transducer #Moisture-Sensor #SHT4

Board Mount Humidity Sensors Intermediate Humidity and Temperature Sensor Humidity, Temperature 0 ~ 100% RH I2C ±1.8% RH 4 s Surface Mount The SHT41-AD1B-R2 is a fully calibrated, low-power environmental sensor that measures relative humidity (RH) and temperature. It integrates sensing elements, signal processing, and a digital interface into a small surface-mount package, making it ideal for space-constrained designs. Key Features Sensor Type: Digital humidity and temperature sensor Interface: I²C (easy MCU integration) Supply Voltage: ~1.08 V to 3.6 V Humidity Accuracy: up to ±1.8% RH (typical) Temperature Accuracy: up to ±0.2 °C (typical) Response Time: Fast measurement and low latency Power Consumption: Ultra-low, suitable for battery devices Package: DFN (compact, ~1.5 × 1.5 mm) Factory Calibration: No external calibration required Functional Overview The sensor uses capacitive humidity sensing combined with a bandgap temperature sensor. Internal electronics convert these measurements into digital data via I²C, eliminating the need for external ADCs or complex signal conditioning. Design Advantages Small footprint for compact PCBs Low power consumption for IoT and portable devices High reliability with long-term stability Fast response time for real-time monitoring Simple integration with microcontrollers Typical Applications IoT and smart home devices HVAC and climate control systems Wearables and portable electronics Industrial monitoring systems Environmental data logging #CommonPartsLibrary #Sensors,-Transducer #Humidity #Moisture-Sensor #SHT4x

Accelerometer, Gyroscope, Magnetometer, 9 Axis Sensor I2C, SPI, UART Output The BNO085 is a high-performance 9-axis absolute orientation sensor system-in-package (SiP) that integrates a 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer, and a low-power ARM Cortex-M0+ microcontroller running CEVA/Hillcrest SH-2 sensor fusion firmware. It provides accurate real-time orientation, motion tracking, and activity detection while offloading complex sensor fusion calculations from the host processor. The device is widely used in robotics, AR/VR systems, wearables, drones, IoT devices, and navigation applications. Key Features 9-axis motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in SH-2 sensor fusion engine for accurate orientation tracking ARM Cortex-M0+ processor for onboard motion processing Outputs quaternion, rotation vector, linear acceleration, gravity vector, angular velocity, and magnetic field data Advanced motion detection including tap, step, shake, and significant motion detection Activity classification and stability detection capabilities Low-latency rotation vectors optimized for AR/VR applications Supports I²C, SPI, and UART communication interfaces Configurable output data rates and timestamps Low-power operation suitable for battery-powered devices Compact 28-pin LGA package (5.2 mm × 3.8 mm) Operating temperature range: -40°C to +85°C Backward compatible with BNO080 designs while adding support for future application-specific libraries Applications Robotics and autonomous systems Virtual Reality (VR) and Augmented Reality (AR) Wearable devices and fitness trackers Drones and UAVs Head-mounted displays (HMDs) Industrial motion tracking IoT and smart devices Navigation and positioning systems #BNO085 #IMU #9AxisSensor #MotionTracking #SensorFusion #OrientationSensor #Robotics #AR #VR #IoT #Wearables #EmbeddedSystems #CEVA #HillcrestLabs #MotionDetection #Quaternion #InertialMeasurementUnit

Accelerometer X, Y, Z Axis ±2g, 4g, 8g 1.5kHz 14-CLCC (6x6) General Description The ADXL355BEZ is a low noise, low drift, low power, three-axis MEMS accelerometer intended for high-precision sensing applications. It delivers high-resolution digital acceleration data with excellent long-term stability and minimal temperature-induced variation. The device integrates a complete sensing chain, including the MEMS sensor element, analog conditioning, analog-to-digital conversion, and digital filtering. Output data is provided through SPI or I²C interfaces, enabling straightforward integration into embedded and industrial systems. Key Features Three-axis acceleration sensing (X, Y, Z) Selectable full-scale ranges: ±2 g, ±4 g, ±8 g Low noise density (~25 µg/√Hz) Low offset and minimal temperature drift High-resolution 20-bit digital output Integrated digital filtering SPI and I²C communication interfaces Low power consumption (~200 µA typical) Wide supply voltage range (2.25 V to 3.6 V) Integrated temperature sensor Hermetically sealed package Applications Structural health monitoring Vibration measurement and analysis Tilt and inclination sensing Industrial condition monitoring Navigation and inertial systems Seismic detection Robotics and stabilization platforms Functional Description The ADXL355BEZ includes an integrated sensing and processing architecture composed of: Three-axis MEMS sensing element Analog front-end signal conditioning High-resolution ADC Digital filtering and decimation stages Temperature sensing element Digital communication interface (SPI/I²C) Configuration and control registers Electrical Characteristics (Typical) Supply voltage: 2.25 V to 3.6 V Supply current: ~200 µA Output data rate: up to 4 kHz Noise density: ~25 µg/√Hz Resolution: 20-bit Interface: SPI / I²C Mechanical and Package Information Package type: LGA (Land Grid Array) Approximate dimensions: 3 mm × 5 mm × 1 mm Hermetically sealed for improved environmental robustness Interface and Communication Supports SPI (4-wire) and I²C protocols Outputs 20-bit acceleration data per axis Data format: two’s complement Measurement Ranges ±2 g ±4 g ±8 g Environmental Specifications Operating temperature range: -40°C to +125°C Storage temperature range: -55°C to +150°C Power Management Supports measurement and standby modes Designed for low-power operation in continuous sensing applications Compliance and Reliability Industrial-grade device Designed for long-term stability RoHS compliant #commonpartslibrary #sensor #accelerometer