Part Review and Datasheet Update


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll inspect the part metadata, find and attach the official datasheet if needed, then compare symbol/footprint/pin data against it and report any mismatches.
I found the project MPN was generic, but the footprint identifies JAE TX25A-80P-LT-H1E; I updated the part Datasheet URL to the official JAE product page and am checking consistency now.
Completed the part review and added the Datasheet URL to the official JAE TX25A-80P-LT-H1E product page. I documented the full findings in part-review-conn040p000c1-jae-tx25a-80p-lt-h1e.
Open items:
  • Project MPN appears wrong: CONN_040P_000C_1 vs footprint/datasheet TX25A-80P-LT-H1E.
  • Manufacturer, connector specs, pin descriptions/types, and many symbol pin positions need cleanup.
  • Exact pad/drill geometry should be verified against JAE drawing SJ116436 before release.
Suggested next steps:
  1. Update project metadata to the real JAE MPN/manufacturer.
  2. Fix terminal descriptions/types and overlapping schematic pin positions.
  3. Verify/repair footprint dimensions against the official JAE drawing.
Fix metadata and pins
Correct part metadata
Fix symbol pins
Verify footprint geometry
Run review checks

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
2
2
Unspecified
3
3
Unspecified
4
4
Unspecified
5
5
Unspecified
6
6
Unspecified
7
7
Unspecified
8
8
Unspecified
9
9
Unspecified
10
10
Unspecified
11
11
Unspecified
12
12
Unspecified
13
13
Unspecified
14
14
Unspecified
15
15
Unspecified
16
16
Unspecified
17
17
Unspecified
18
18
Unspecified
19
19
Unspecified
20
20
Unspecified
21
21
Unspecified
22
22
Unspecified
23
23
Unspecified

TX25A-80P-LT-H1E