TI Part Audit

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

Thought for 5 sec

flux

I’ll audit the part metadata, source the official TI datasheet if needed, update the Datasheet property, then cross-check symbol pins and footprint geometry against the manufacturer documentation.

Worked for 4 mins 27 sec

flux

The datasheet is already present and correct. I found several metadata and footprint issues, so I’m doing a final read-back to confirm the current project state before summarizing.

Thought for 20 sec

flux

Audit complete. The existing Datasheet property already points to the correct official TI datasheet, so it was left unchanged.

Key specs: 2.5–5.5 V input, adjustable 0.6 V–VIN output, 2 A synchronous buck, forced PWM, 2.4 MHz typical, 23 µA typical quiescent current, 6-pin DRL/SOT-563 package.
Symbol: All six pin numbers and names match the datasheet, but electrical types and pin descriptions are missing.
Metadata: “Part Type” is incorrectly classified as Linear Regulator; package is underspecified as SOT instead of DRL0006A/SOT-563.
Footprint: Pin mapping and 0.50 mm pitch are correct, but the land dimensions and row spacing differ substantially from TI’s recommended pattern—approximately 0.475 × 0.30 mm and 2.151 mm outside span versus 0.67 × 0.30 mm and 1.48 mm.
I filed an internal part-quality report for the footprint discrepancy. No footprint or symbol changes were made.

Fix metadata and footprint

Correct footprint only

Improve symbol metadata

Fix part classification

Recheck after fixes

Files

Pins

Symbol

Layout

3D View

GND

Pin Number

VIN

Pin Number

Name

Pin #

Type

Section

Pin Group

Orientation

Order

Sub-symbol

GND

Unspecified

VIN

Unspecified

TPS62A02ADRLR