Datasheet Part Audit
Worked for 1 min 11 sec
Completed — TPS259830ONRGER terminal grouping
- Power: pins 1, 2, 3, 16–25 — order 1, orientation Top
- Control: pins 6, 7, 8, 10, 11, 12, 15 — order 4, orientation Left
- Monitoring: pins 9, 13 — order 7, orientation Right
- Ground: pins 4, 5, 14, 26 — order 10, orientation Bottom
Verification
- All 26 pins are present exactly once.
- Every pin has Pin Group, Section, Terminal Order, and Pin Orientation.
- Section exactly equals Pin Group on every pin.
- Exactly four groups exist with four distinct orientations.
- Power and Ground orders are 1 and 10, respectively.
- No sub-symbol suffixes were added.
- Pin names/numbers, types, symbol positions, footprint, and all three project assets remain unchanged.
- Terminal review checks returned no findings.
Thought for 10 sec
Updated and verified all 26 pins:
- Power — Order 1, Top
- Control — Order 4, Left
- Monitoring — Order 7, Right
- Ground — Order 10, Bottom
Every pin now has a Section matching its Pin Group. All pins occur in exactly one group, and pin numbers, names, symbol positions, and footprint mappings were preserved.
Fix metadata and review
Fix pin metadata
Rename special pins
Check symbol layout
Run part review
