Part Audit Review
Thought for 9 sec
I’ll audit the part metadata, source the official TI datasheet if needed, update the Datasheet property, then verify symbol pins and footprint against the manufacturer documentation.
Worked for 3 mins 13 sec
Audit complete. The official TI datasheet URL was already set correctly, so no update was needed.
- Correct: MPN, manufacturer, 6-pin count, DDC/SOT-23 package family, and symbol pin numbers/names.
- Key specs: VIN 0.8–5.5 V, VBIAS 1.5–5.5 V, 3 A maximum continuous current, 19 mΩ typical RON, adjustable rise time, 100 Ω typical quick-output discharge, −40°C to +125°C, AEC-Q100 Grade 1.
- Mismatches: Part Type is incorrectly “Electromechanical,” IC classification is incorrectly Logic/AND, Mount is “Reverse,” and the description incorrectly claims fixed current limiting and reverse-current blocking.
- Symbol: All pin types are unspecified and pin descriptions are missing.
- Footprint: Pin mapping is correct, but its 0.6 × 1.25 mm pads and 2.5 mm opposing-row spacing differ from TI’s recommended 0.6 × 1.1 mm and 2.7 mm land pattern. This may be an IPC alternative but should be reviewed before production.
I filed an internal part-quality report covering these issues.
Fix metadata and footprint
Fix metadata only
Adjust footprint
Run review
Create audit note
