Check this schematic component against the datasheet for [MPN] and assign the correct pin orientation, section, and terminal order without changing, replacing, renumbering, or remapping any pins. Remove the Pin Group property from all pins if it exists. Place Power pins first and Ground pins last. Within each section, distribute the pins as evenly as possible between the left and right sides; for example, split 10 pins as 5/5 and 11 pins as 5/6 or 6/5. If a section contains only one pin, leave it on the most appropriate side. Keep the symbol compact, balanced, and visually symmetrical. If a pin function is unclear, assign Unclear / Check datasheet, then apply all changes directly to the schematic component.