Pin Function Grouping and Datasheet Review
Worked for 3 mins 48 sec
Completed the datasheet review and grouped every STM32F103VET6 pin exactly once by primary function. The symbol pinout matches the LQFP100 datasheet table; I flagged metadata mismatches: package is set to
TO instead of LQFP100, mount is Base, and part type could be more specific.Full notes are in the project document:
stm32f103vet6-part-review.Suggested next steps:
- Update package metadata to LQFP100 / SMD.
- Optionally switch Datasheet URL to the VE-specific ST URL.
- Run a deeper footprint land-pattern dimension check if you want pad geometry verified against the ST package drawing.
Thought for 6 sec
I’ll simplify the pin groups to broader functions and set every pin’s Section to exactly match its Pin Group.
Worked for 1 min 27 sec
Updated the functional grouping to broader categories and set each pin’s Section to match its Pin Group.
Groups now used:
- Power
- Ground
- Reference
- Control
- Clock
- GPIO
- No Connect
I spot-checked representative pins after the update and confirmed Section matches Pin Group.
Fix metadata and review
Fix part metadata
Use VE datasheet
Check footprint dimensions
Run ERC DRC
