STBC08PMR Review

flux

I’ll inspect the part metadata, look for an official datasheet if needed, update the Datasheet property if missing, then compare symbol/footprint/pin info against the datasheet and summarize any mismatches.

flux

I found the official ST datasheet and updated the part project’s Datasheet URL property. I’m now checking the symbol and footprint details against the datasheet.
Created a project doc

STBC08PMR Part Review

View Document
Date: 2026-07-17 Reviewed the published Flux part project for STBC08PMR against the official STMicroelectronics datasheet and available proj...

flux

Done — I added the official ST datasheet URL and created the detailed review in STBC08PMR Part Review.
Open items flagged:
  • Missing/weak metadata: empty Part Type, poor description, no pin descriptions.
  • Symbol issues: POWER_ON and CHRG should be open-drain outputs; exposed pad should not be modeled as mandatory Power In.
  • Footprint concern: side pads appear to be an IPC variant, but the exposed-pad copper does not clearly match ST’s recommended land pattern.
Suggested next steps:
  1. Update the part metadata and pin descriptions.
  2. Correct the open-drain/status pin types.
  3. Rework or explicitly document the footprint deviation from ST Figure 16.
Fix issues and review
Fix flagged issues
Use ST footprint
Document IPC deviation
Run review again
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
BAT
1
Output
POWER_ON
2
Bi-Directional
CHRG
3
Bi-Directional
GND
4
Power In
PROG
5
Bi-Directional
VCC
6
Power In
EXP
7
Power In

STBC08PMR