Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, source the official Samtec datasheet if needed, then verify the symbol pins and footprint geometry against it and report any discrepancies.
The official Samtec document set is confirmed. I’m adding the through-hole SSW catalog datasheet URL, then I’ll finish the dimensional and pin-numbering cross-check.
Audit complete. I added the official Samtec through-hole datasheet URL and verified that the 70-pin symbol, numbering, 2.54 mm pitch, Ø1.04 mm holes, and body outline match Samtec documentation.
Flagged issues: the description is inadequate, package metadata is missing, and pins lack descriptions; no footprint geometry mismatch was found. Full results: SSW-135-02-T-D Part Audit.