Part Datasheet Audit


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, locate and attach the official Samtec datasheet if needed, then verify the symbol, footprint, and pin descriptions against it and report any discrepancies.
Created a project doc

SSW-127-02-T-D Part Datasheet Audit

View Document

The part identity, 54-contact symbol, and overall footprint geometry agree with the official Samtec SSW through-hole catalog. No critical pi...
Audit complete. The MPN, 54-pin symbol, 2×27 through-hole footprint, 2.54 mm pitch, body dimensions, tin plating, and lead style match Samtec documentation; the existing Datasheet property was already populated, so it was preserved.
Minor gaps: Package/Case metadata and pin descriptions are absent, and the 1.04 mm drill/1.39 mm pad dimensions could not be authoritatively confirmed. Full results: Part Datasheet Audit.
Fix metadata gaps
Verify pad geometry
Run quality checks
Check sourcing data

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
01
01
Passive
02
02
Passive
03
03
Passive
04
04
Passive
05
05
Passive
06
06
Passive
07
07
Passive
08
08
Passive
09
09
Passive
10
10
Passive
11
11
Passive
12
12
Passive
13
13
Passive
14
14
Passive
15
15
Passive
16
16
Passive
17
17
Passive
18
18
Passive
19
19
Passive
20
20
Passive
21
21
Passive
22
22
Passive
23
23
Passive

SSW-127-02-T-D