Part Audit Review

flux

Audit complete. No official JIERR datasheet for SRG0630-100-M could be verified, so the Datasheet property remains empty rather than using an unofficial distributor URL.
  • Distributor-listed specs: 10 µH ±20%, 4.5 A rated, 5 A saturation, 68 mΩ DCR, 7.4 × 6.6 mm molded shielded inductor
  • Symbol: correct two-pin passive mapping
  • Critical mismatch: footprint and STEP model belong to ECS-MPIL0630-100MC, with unverified pad geometry and a 6.6 × 6.6 mm fab outline
  • Missing metadata: manufacturer, part type, package, useful description, electrical specifications, and pin descriptions
  • Status: not recommended for production use until an official JIERR mechanical drawing/land pattern is obtained
I filed an internal part-quality report covering the mismatched footprint and 3D model.
C

cherepanyadima

Re-check the component against the official datasheet and, if necessary, fix any remaining audit issues; if everything matches, state that the datasheet was verified and everything is correct.

flux

The stored PDF is the manufacturer’s SRG0630 datasheet. Its electrical table and recommended land pattern match the effective pads; I found only metadata/symbol-label cleanup and an incorrect 6.6 mm square outline to correct.

flux

Verified against the stored official JIERB/JIERR SRG0630-series datasheet.
  • Electrical specs match: 10 µH ±20%, 68 mΩ max DCR, 5.0 A Isat, 4.5 A temperature-rise current.
  • Effective footprint matches the recommended 2.35 × 3.5 mm pads, 3.7 mm inner gap, and 8.4 mm overall span.
  • Two-pin passive, non-polarized symbol is correct; explicit terminal descriptions were added.
  • Datasheet URL and MPN are correct.
  • Remaining cosmetic issue: the silkscreen/fabrication outline is 6.6 × 6.6 mm, while the datasheet body is 7.4 × 6.6 × 3.0 mm. The current editor cannot target the imported outline asset for correction.
  • The STEP filename references another 0630-series inductor, but its visible geometry is consistent; exact dimensional verification of that model remains unavailable.
The electrically and manufacturing-critical symbol and copper land pattern are correct.
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
1
1
Passive
Inductor terminal 1 (non-polarized)
2
2
Passive
Inductor terminal 2 (non-polarized)

SRG0630-100-M