Part Review Mismatch
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 7 sec
I’ll inspect the part metadata, look for an official datasheet if needed, update the Datasheet property, then compare symbol/footprint/pins against the datasheet and report any mismatches.
Worked for 53 sec
The part already has a Datasheet URL set, so I’m using that for the cross-check rather than replacing it.
Worked for 5 mins
Created a project doc
Completed the part review and created the detailed report here: Part Information Review: SQD40N06-14L_GE3.
Key findings: the existing Datasheet URL is present, and the part metadata broadly matches the Vishay SQD40N06-14L_GE3; however, the schematic pins lack Gate/Drain/Source descriptions and all pin types are unspecified. The main issue is a likely critical footprint mismatch: the large TO-252 tab pad is numbered
3, but the datasheet says the tab is Drain, while pin 3 is Source.Suggested next steps:
- Fix pin descriptions/types for pins 1–3.
- Correct the footprint so the large tab is electrically Drain.
- Optionally replace the stored Datasheet URL with the official Vishay PDF URL for traceability.
Fix pins and footprint
Fix mismatches
Use official datasheet
Run ERC/DRC
Export corrected part
