SP3232EEN Part Audit
Thought for 6 mins 31 sec
Thought for 7 sec — Inspecting project components
Created 4 tasks.
1/4 Inspect part metadata, properties, symbol pins, and footprint
Inspect part metadata, properties, symbol pins, and footprint
Find and verify the official datasheet; update Datasheet property if absent
Cross-check package, pin mapping/descriptions, and footprint against datasheet
Summarize key specifications and flag mismatches
Thought for 6 sec
Referenced guidance.
Thought for 21 sec — Investigating schema modifications
Created a thread
SP3232EEN Audit
Completed
View Thread
Thought for 8 sec
Awaiting 1 background task
Received notification from "SP3232EEN Audit" that it finished — picking the work back up.
Thought for 7 sec
The audit executor has finished. I’m reconciling its findings now, then I’ll independently verify the datasheet property, symbol pinout, and footprint before closing the review.
Thought for 35 sec
The executor found the existing datasheet URL was already valid, so no property replacement was needed. I’m doing the final neutral check of the reported classification and pin-metadata issues now.
Thought for 1 min 30 sec
Audit complete. The existing datasheet URL is valid, so it was retained; the official MaxLinear source was also verified. The 16-pin symbol mapping and NSOIC-16 footprint match the datasheet.
- Key specs: 3.0–5.5 V, dual driver/dual receiver, 120 kbps minimum, ±15 kV HBM ESD, 0.1 µF charge-pump capacitors, −40°C to +85°C.
- Issues: incorrect
Logic/ANDclassification, missing SMD mount metadata, and all pin types/descriptions are unspecified. The 3D model’s dimensional fit remains unverified. - Full details: Part Audit.
Fix part metadata
Validate 3D model
Improve part quality
Add application guidance
