Part Datasheet Audit


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, source the official datasheet if needed, cross-check the symbol and footprint, and report any mismatches.
Audit complete. The existing Datasheet property already links to an official Skyworks datasheet, so no URL update was needed; key specs include SC-79, 22 V max reverse voltage, 1.20–1.53 pF at 4 V, 0.30–0.43 pF at 20 V, ≥2.8 capacitance ratio, Q ≈500 at 4 V/50 MHz, and −55°C to +125°C operation.
The 2-pad footprint and pin-1 cathode orientation appear consistent, but the schematic part is not safe to publish as-is: its description incorrectly identifies an NXP MCU, Part Type is missing, pins lack anode/cathode names and descriptions, and the symbol does not clearly depict a varactor. A library-part quality report was filed for these issues.
fix this flag issue "Severe metadata/symbol defects: project description incorrectly describes an NXP MIMXRT1173 dual-core MCU/289-ball BGA. Official part is a 2-terminal Skyworks SC-79 hyperabrupt tuning varactor. Part Type is unset;"
I’ll replace the incorrect MCU description with the Skyworks varactor description and set Part Type to Diode, without changing the symbol or footprint.
Fixed and verified the flagged metadata: the description now identifies SMV2020-079LF as a Skyworks 2-terminal SC-79 hyperabrupt tuning varactor. Normalized Part Type from “Varactors” to Diode and set Diode Type to Varactor; the footprint and symbol geometry were left unchanged.

~
Pin Number
1
~
Pin Number
2
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
~
1
Unspecified
~
2
Unspecified

SMV2020-079LF