Part Validation Review

Thought for 6 sec

I’ll review the part metadata, find and set the official datasheet if missing, then compare the symbol, footprint, and pin descriptions against the datasheet and report any mismatches.

Worked for 2 mins 42 sec

flux

The part already had an official GCT datasheet URL set, so I’m leaving that property unchanged and using it for the symbol/footprint check.

Worked for 6 mins 13 sec

Created a project doc

Part Validation Report: SIM8060-6-1-14-00-A

View Document

Manufacturer Part Number (MPN): SIM8060-6-1-14-00-A Manufacturer: GCT / Global Connector Technology

flux

Completed the part review and created Part Validation Report: SIM8060-6-1-14-00-A.

Open items:

Datasheet URL was already set to the official GCT PDF; no property update was needed.
Footprint geometry matches the datasheet.
Flagged quality issues: missing pin descriptions, all pins typed Unspecified, generic GND terminal naming, and description not mentioning the card-detect switch.

Suggested next steps:

Update pin types and pin descriptions from the datasheet.
Optionally revise the description to mention “6 contacts + card-detect switch.”
Review whether SW/GND should be tied to ground or routed as card-detect in downstream designs.

Fix metadata and verify

Fix symbol metadata

Revise part description

Run ERC DRC

Check SW/GND usage

Files

Pins

Symbol

Layout

3D View

SIM8060-6-1-14-00-A