Part Audit Review
Thought for 6 mins 25 sec
Thought for 5 sec
Referenced guidance.
Created 5 tasks.
1/5 Inspect all current part metadata, symbol pins, and footprint geometry
Inspect all current part metadata, symbol pins, and footprint geometry
Find and verify the official manufacturer datasheet
Update the Datasheet property if missing
Cross-check symbol, footprint, and pin descriptions against the datasheet
Summarize specifications and report mismatches
Thought for 15 sec — Researching report details
Created a thread
Part Audit Review
Completed
View Thread
Thought for 6 sec
Awaiting 1 background task
Received notification from "Part Audit Review" that it finished — picking the work back up.
Thought for 9 sec
I’m reconciling the completed audit against the live part data now, then I’ll close any remaining verification gaps and deliver the mismatch summary.
Thought for 1 min 5 sec
Audit reconciled and independently verified. The official Bel datasheet URL was already correctly set, so no property update was needed; the footprint matches the recommended hole pattern, but the symbol has critical errors: P7, P9, and P10 are incorrectly labeled NC, and P5 is mislabeled as a transmit rather than receive center tap.
Full specifications, pin-by-pin results, and mechanical dimensions are in the Part Audit. I also filed an internal part-quality report; the part should not be used from symbol names alone until these terminal definitions are corrected.
Fix symbol definitions
Fix critical terminals
Improve connector metadata
