I’ll inspect the reported issue and the current part definition against the official RP2350A datasheet, correct confirmed errors, then independently verify the result.
The current project is a part definition with 61 terminal objects. I’m checking the full pin table and package geometry rather than relying on the Linear summary alone.
The Linear issue’s claimed pin swap is incorrect: the datasheet assigns QSPI_IOVDD to pin 54 and QSPI_SS to pin 60, matching the current part. I preserved that mapping and corrected the actual metadata/terminal issues.
Checked and corrected the part against the official RP2350A datasheet.
FLUX-13960’s reported pin swap is incorrect:QSPI_IOVDD = pin 54 and QSPI_SS = pin 60; the existing mapping was preserved.
Updated the Datasheet URL to the official Raspberry Pi document.
Corrected VREG_PGND and exposed-pad GND electrical types to Ground and added clarifying pin descriptions.
The 61-pad QFN footprint geometry matches the 7 × 7 mm, 0.4 mm-pitch package and 3.4 mm exposed pad.
Open item
The attached 3D model is still the unrelated IS31FL3741A model. It does not affect PCB fabrication, but should be replaced at the library-source level.