Part Audit Review


Status: Mostly correct
Your mechanical fix is now effective:
  • Auxiliary hook hole: Ø1.8 mm
  • Position: 13.75 mm from the centerline and 6.5 mm from the contact row
  • Contacts: 12 × Ø0.9 mm drills, 2.50 mm pitch
  • Pin span: 27.5 mm
  • Pins 1–12 map correctly, and all are configured as Passive
Remaining inaccuracies / cleanup
  • The underlying imported footprint asset still contains the old Ø3.44 mm hole; a layout-rule override changes the effective hole to Ø1.8 mm. Manufacturing output should use the corrected size, but permanently correcting the source footprint would be cleaner.
  • Pin descriptions are still blank. Using “Contact 1” through “Contact 12” would improve library quality, although the contacts have no unique electrical functions.
  • Connector metadata remains incomplete: package/type, 2.50 mm pitch, 12 positions, one row, 3 A, 250 V, right-angle/side-entry, and temperature range are not populated as structured properties.
  • The Datasheet property points to an uploaded copy rather than the official JST URL. The document itself appears appropriate, but the official current source is https://www.jst.com/wp-content/uploads/2025/06/eXA-WB.pdf.
  • The symbol inspector displays a blank electrical-type column even though each terminal’s Pin Type property is Passive—likely an indexing/display inconsistency rather than a part error.
review all component metadata and correct any outdated or incorrect information according to the official datasheet. Update all properties with accurate, verified information.
I’ll re-read the current part properties, verify them against the official JST datasheet, and update the metadata in place without changing the symbol or footprint geometry.
Finished execution
"JST Connector Metadata Audit" completed.
Updated and verified 11 part properties, corrected the description, and refreshed the datasheet from the official JST source; symbol and footprint geometry were preserved. Full changes and evidence are in the Metadata Audit.
Row count, glow-wire qualification, and expanded-temperature claims remain unverified and were not added; the changes have not been republished.

Pin #
Name
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Passive
Left
2
2
Passive
Left
3
3
Passive
Left
4
4
Passive
Left
5
5
Passive
Left
6
6
Passive
Left
7
7
Passive
Left
8
8
Passive
Left
9
9
Passive
Left
10
10
Passive
Left
11
11
Passive
Left
12
12
Passive
Left

S12B-XASK-1_LF__SN_