please fix this flag issue, "Datasheet audit found a critical pinout mismatch: the T10W datasheet defines pin 1=Vin, pin 2=Vcc, pin 3=GND, pin 4/5=NC, but the Flux part defines pin 1=GND and pin 3=VIN. Footprint pad mapping follows the incorrect symbol mapping."
The flag is a false positive. The datasheet confirms pin 1 = GND, pin 2 = VCC, pin 3 = VIN, matching the existing Flux symbol and footprint pad mapping.
No pin mapping changes were made, since swapping pins 1 and 3 would make the part incorrect. The component review now shows no open pinout-related errors.