Part Audit Review


Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, source the official datasheet if needed, update its Datasheet property, then verify the symbol, footprint, and pin descriptions against the manufacturer documentation.
The part already has a Datasheet URL, but it points to a third-party archive. I found the current official Microchip datasheet and am using that as the verification source; the metadata and footprint have already exposed several likely classification and geometry issues.
Created a project doc
Audit complete. Pin numbering and footprint mapping are correct, but the part has incorrect MCU classification (Logic / AND), an inaccurate RAM description, missing pin types/descriptions and alternate functions, plus ambiguous SSOP package metadata; the existing Datasheet URL was already populated, so it was not changed.
Full findings and recommended corrections: PIC18F26K22-I/SS Part Audit.
Fix metadata and pins
Update datasheet URL
Validate footprint dimensions
Run part review

~MCLR~/VPP/RE3
Pin Number
1
RA0
Pin Number
2
RA1
Pin Number
3
RA2
Pin Number
4
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
~MCLR~/VPP/RE3
1
Unspecified
RA0
2
Unspecified
RA1
3
Unspecified
RA2
4
Unspecified
RA3
5
Unspecified
RA4
6
Unspecified
RA5
7
Unspecified
VSS_1
8
Unspecified
Bottom
RA7
9
Unspecified
RA6
10
Unspecified
RC0
11
Unspecified
RC1
12
Unspecified
RC2
13
Unspecified
RC3
14
Unspecified
RC4
15
Unspecified
RC5
16
Unspecified
RC6
17
Unspecified
RC7
18
Unspecified
VSS_2
19
Unspecified
Bottom
VDD
20
Unspecified
Top
RB0
21
Unspecified
RB1
22
Unspecified
RB2
23
Unspecified

PIC18F26K22-I/SS