Part Datasheet Audit

A

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll audit the part metadata, locate the official manufacturer datasheet if needed, update the Datasheet property, then compare the symbol, footprint, and terminal descriptions against the published drawing.
Created a project doc

OQ0912510000G Part Datasheet Audit

View Document
Reviewed current project metadata, the 9-terminal schematic symbol, imported KiCad footprint, and the stored manufacturer datasheet URL. Ser...

flux

Audit complete. The 9-pin, 3.50 mm-pitch footprint geometry matches the datasheet, including 1.40 mm drills and 28.00 mm pin span; the existing Anytek datasheet URL was already populated, so it was not changed. Main issues: all symbol pins are Unspecified instead of Passive, pin descriptions are missing, and the package property is absent.
Full findings: OQ0912510000G Part Datasheet Audit
Fix metadata issues
Update datasheet URL
Run part review
Export audit package
Sign up to send

Files

Pins

Symbol

Layout

3D View

8
Pin Number
8
7
Pin Number
7
9
Pin Number
9
6
Pin Number
6
Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
1
1
Unspecified
Left
2
2
Unspecified
Left
3
3
Unspecified
Left
4
4
Unspecified
Left
5
5
Unspecified
Left
6
6
Unspecified
Left
7
7
Unspecified
Left
8
8
Unspecified
Left
9
9
Unspecified
Left

OQ0912510000G