Pin Function Grouping

flux

Arranged the symbol as requested: Channel A/B inputs left, outputs right, V+ top, and V− bottom.
A

adrian95

Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.

flux

This part has 8 terminals, not 10, and no dedicated Ground pin—V− is the negative supply, not necessarily GND.
Should I:
  1. Assign orders 1–8, with V+ = 1 (Top) and V− = 8 (Bottom); or
  2. Use orders 1–10 with gaps, treating V− as the last terminal (10) without relabeling it Ground?
A

adrian95

Use option 1: assign Terminal Orders 1–8, with V+ first and V− last.

flux

Assigned Terminal Orders 1–8:
  • V+ = 1, Top
  • Channel A = 2–4, Left/Right
  • Channel B = 5–7, Right/Left
  • V− = 8, Bottom
Verify symbol layout
Separate amplifier units
Check datasheet pinout
Improve pin group names
Sign up to send

Files

Pins

Symbol

Layout

3D View

OUT_A
Pin Number
1
-IN_A
Pin Number
2
V+
Pin Number
8
+IN_B
Pin Number
5
-IN_B
Pin Number
6
OUT_B
Pin Number
7
V-
Pin Number
4
+IN_A
Pin Number
3
Name
Pin #
Type
Part Type
Pin Group
Pin Orientation
Section
Terminal Order
OUT_A
1
Output
Terminal
Output A
Right
Channel A
4
-IN_A
2
Input
Terminal
Inputs A
Left
Channel A
2
+IN_A
3
Input
Terminal
Inputs A
Left
Channel A
3
V-
4
Power In
Terminal
Power Supply
Bottom
Power
8
+IN_B
5
Input
Terminal
Inputs B
Right
Channel B
6
-IN_B
6
Input
Terminal
Inputs B
Right
Channel B
5
OUT_B
7
Output
Terminal
Output B
Left
Channel B
7
V+
8
Power In
Terminal
Power Supply
Top
Power
1

OPA1642AIDR