Part Datasheet Audit

Worked for 12 mins 46 sec
3/4 Apply only confirmed corrections

Inspect the current post-revert part state

Cross-check all terminal and footprint details against the official NKK datasheet

Apply only confirmed corrections

Verify the final part state independently

Thought for 7 sec
Updated A, 1, 2 and 10 more.
Thought for 12 sec
Set properties on A, 1, 2 and 10 more.
Thought for 8 sec
Thought for 7 sec
Awaiting 1 background task
Thought for 7 sec
Awaiting 1 background task
Thought for 6 sec
Awaiting 1 background task
Thought for 6 sec
Checking MRK112-A final independent review progress…
Thought for 9 sec
Awaiting 1 background task
"MRK112-A Footprint Review" completed.

flux

The independent review found one real artifact from renaming the common pin: the imported A1 pad remained underneath the new logical A pad, creating a duplicate overlapping pad. I’m removing only that stale unmapped pad, with no dimensional changes.

flux

Careful audit and independent review completed.
  • Corrected terminals to datasheet labels A, 1–12.
  • Added passive pin types and accurate common/switched-contact descriptions.
  • Disabled the stale overlapping imported A1 pad; the footprint now has 13 active pads.
  • Confirmed the relative circular pad geometry and mapping.
  • Left physical dimensions unchanged because PDF drawing OCR produced conflicting values.
Open item: the Datasheet property still points to NKK’s official product page rather than the direct PDF.
Sign up to send

Files

Pins

Symbol

Layout

3D View

A
Pin Number
A
11
Pin Number
11
9
Pin Number
9
2
Pin Number
2
10
Pin Number
10
3
Pin Number
3
8
Pin Number
8
4
Pin Number
4
7
Pin Number
7
5
Pin Number
5
6
Pin Number
6
12
Pin Number
12
1
Pin Number
1

MRK112-A