MR30PW-FB Part Review

flux

I found this is a published part with 5 terminals/pads and an existing Datasheet URL pointing to a TME product page; I’m checking for an official Amass drawing/datasheet before comparing geometry.
Created a project doc

MR30PW-FB Part Review

View Document
Date: 2026-07-20 Reviewed available project metadata, schematic symbol terminals, PCB footprint geometry, and public documentation for the p...

flux

Reviewed the MR30PW-FB part and updated the Datasheet URL to the direct TME MR30PW-FB PDF. I created the detailed report here: MR30PW-FB Part Review.
Open items:
  • Main contact holes/pads appear undersized: current 1.7 mm drill / 2.55 mm pad vs reference 1.9 mm drill / 3.0 mm pad.
  • Symbol exposes mechanical mounting holes as pins 4/5; the connector is only 3 electrical pins.
  • Pin types/descriptions are missing or unspecified.
  • I filed an internal part-quality report for the footprint/symbol issues.
Suggested next steps:
  1. Update pads 1–3 to 1.9 mm drill and 3.0 mm pad size.
  2. Mark MH1/MH2 as mechanical/non-electrical or remove them from the electrical symbol.
  3. Add pin descriptions and set pins 1–3 to passive.
  4. Optionally normalize Part Type from Connectors to Connector.
A

adrian95

Add passive pin types and clear descriptions for the three electrical contacts.

flux

Set contacts 1, 2, and 3 to Passive with descriptions “Electrical power contact 1/2/3.” Mechanical terminals MH1 and MH2 were left unchanged.
Sign up to send

Files

Pins

Symbol

Layout

3D View

MR30PW-FB