Part Audit and Datasheet Review

flux

Read the attached instructions and applied them by updating the project document with the full grouped Terminal Order table using the current renamed terminals.
Open items:
  • None for the terminal-order request.
  • Short check in the document reports: 94/94 OK terminals, 0 rename needed, 0 uncertain.
Suggested next step:
  1. Review ME310G1-W1 Part Audit and Terminal Order Table and publish/update the part if it looks good.
C

cherepanyadima

Read the file and follow all instructions.
pasted-text-1783019761465.txt

flux

I’ll read the attached file and apply its instructions to the current part project.

flux

Read the attached file and applied its terminal-order instructions to the current ME310G1-W1 part.
Open items:
  • None for this instruction set.
  • The project currently has duplicate ME310G1-W1 Terminal Order Table documents, so I refreshed both entries.
Suggested next step:
  1. Optionally remove/merge the duplicate terminal-order document to keep one source of truth.
Merge docs and review
Merge duplicate docs
Rerun part review
Verify pin orientations
Check footprint export
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Part Type
Pin Description
Pin Orientation
GND_1
A3
Ground
Terminal
Ground pad
CELL_MAIN_ANTENNA
A5
Bi-Directional
Terminal
Main cellular antenna, 50 ohm RF port
GND_2
A7
Ground
Terminal
Ground pad
GND_3
A9
Ground
Terminal
Ground pad
RES_1
A11
Reserved
Terminal
Reserved; must not be connected
GND_4
A13
Ground
Terminal
Ground pad
RES_2
A15
Reserved
Terminal
Reserved; must not be connected
GND_5
A17
Ground
Terminal
Ground pad
VBATT
AA3
Power In
Terminal
Main power supply for baseband
SPI_MOSI
AA5
Bi-Directional
Terminal
SPI MOSI, 1.8 V CMOS
SPI_CLK
AA7
Bi-Directional
Terminal
SPI clock, 1.8 V CMOS
RX_AUX
AA9
Input
Terminal
Auxiliary UART receive input from DTE, 1.8 V CMOS
C104/RXD1
AA11
Output
Terminal
USIF1 serial data output to DTE, 1.8 V CMOS; must not be high at boot
C105/RTS1
AA13
Input
Terminal
USIF1 request-to-send input from DTE, 1.8 V CMOS
C104/RXD0
AA15
Output
Terminal
USIF0 serial data output to DTE, 1.8 V CMOS
C106/CTS0
AA17
Output
Terminal
USIF0 clear-to-send output to DTE, 1.8 V CMOS
S_LED
B2
Output
Terminal
Status LED output
GND_6
B4
Ground
Terminal
Ground pad
GND_7
B6
Ground
Terminal
Ground pad
RES_3
B8
Reserved
Terminal
Reserved; must not be connected
GND_8
B10
Ground
Terminal
Ground pad
GND_9
B12
Ground
Terminal
Ground pad
GND_10
B14
Ground
Terminal
Ground pad

ME310G1-W1