MCP6V02 Part Review
Worked for 2 mins 8 sec
Created a project doc
MCP6V02-E/SN Part Review
Date: 2026-07-16 Official Microchip datasheet: https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/22...
Completed the MCP6V02-E/SN review and updated the Datasheet URL to Microchip’s official PDF. Full findings are in MCP6V02-E/SN Part Review.
Open items:
- Pinout, MPN, manufacturer, package, and pad count match the datasheet.
- Pin Type values are all still
Unspecified; they should be Input/Output/Power. - Pin Description properties are missing.
- Footprint is compatible, but pad width is 0.65 mm vs Microchip recommended 0.60 mm max.
Suggested next steps:
- Update terminal Pin Type and Pin Description metadata.
- Decide whether to revise the SOIC pad width to strict Microchip land-pattern dimensions.
- Re-run part review checks after metadata cleanup.
Fix metadata and verify
Update pin metadata
Strict land pattern
Run review checks
Update part type
Refine this doc
Ask about this doc
MCP6V02-E/SN Part Review
Date: 2026-07-16
Source Checked
- Official Microchip datasheet: https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/22058c.pdf
- Microchip product family: MCP6V01/2/3 zero-drift operational amplifiers
Current Part Metadata
Table
| Field | Current / verified value | Status |
|---|---|---|
| Manufacturer Part Number | MCP6V02-E/SN | OK |
| Manufacturer | Microchip | OK |
| Description | Dual auto-zero / zero-drift op amp; current project description includes rail-to-rail, 1.8 V to 5.5 V, SOIC-8 detail | OK |
| Part Type | Integrated Circuits | Acceptable, but more specific type would be Operational Amplifier |
| Designator Prefix | IC | OK |
| Datasheet URL | Updated to official Microchip PDF | OK |
| Pin / pad count | 8 | OK |
| Package | /SN = 8-lead SOIC, 150 mil body | OK |
Key Datasheet Specs
Table
| Parameter | Datasheet value |
|---|---|
| Function | Dual zero-drift / auto-zero operational amplifier |
| Input / output | Rail-to-rail input/output |
| Supply range | 1.8 V to 5.5 V |
| Temperature grade | E = -40°C to +125°C |
| Input offset voltage | ±2.0 µV max at +25°C |
| Offset drift | ±50 nV/°C max over -40°C to +125°C |
| Quiescent current | 300 µA typ, 400 µA max per amplifier |
| Gain-bandwidth product | 1.3 MHz typ |
| Common-mode input range | VSS - 0.20 V to VDD + 0.20 V |
| Output swing | VSS + 15 mV to VDD - 15 mV typical condition shown in datasheet |
| Absolute max VDD - VSS | 6.5 V |
| ESD | HBM ≥ 4 kV, MM 300 V |
Pinout Cross-Check
Datasheet MCP6V02 SOIC pinout:
Table
| Pin | Symbol | Datasheet description | Flux terminal | Status |
|---|---|---|---|---|
| 1 | VOUTA | Output, op amp A | VOUTA | OK |
| 2 | VINA- | Inverting input, op amp A | VINA- | OK |
| 3 | VINA+ | Non-inverting input, op amp A | VINA+ | OK |
| 4 | VSS | Negative power supply | VSS | OK |
| 5 | VINB+ | Non-inverting input, op amp B | VINB+ | OK |
| 6 | VINB- | Inverting input, op amp B | VINB- | OK |
| 7 | VOUTB | Output, op amp B | VOUTB | OK |
| 8 | VDD | Positive power supply | VDD | OK |
No pin-number or terminal-name mismatch was found.
Symbol / Terminal Metadata Findings
Table
| Finding | Severity | Detail |
|---|---|---|
| Pin Type is Unspecified for every terminal | Medium | Datasheet supports assigning VOUTA/VOUTB as Output, VINA-/VINA+/VINB-/VINB+ as Input, and VDD/VSS as Power. Leaving these unspecified weakens ERC. |
| Pin Description properties are missing | Low / Medium | Pin names and numbers are correct, but each terminal lacks the datasheet descriptions. |
| Symbol placement does not mirror physical package order | Informational | This is not an electrical mismatch; schematic symbols may be functional rather than physical. Pin numbers are correct. |
Footprint Cross-Check
Current footprint asset:
SOIC127P600X175-8N.kicad_mod.Table
| Datasheet / land-pattern item | Datasheet value | Current footprint | Status |
|---|---|---|---|
| Lead count | 8 | 8 pads | OK |
| Pitch | 1.27 mm BSC | 1.27 mm | OK |
| Pad row spacing | 5.40 mm recommended contact pad spacing | 5.40 mm center-to-center | OK |
| Pad length | Y1 max 1.55 mm | 1.50 mm | OK / slightly shorter |
| Pad width | X1 max 0.60 mm | 0.65 mm | Minor land-pattern deviation |
| Body width | 3.90 mm BSC | Fab outline 3.90 mm | OK |
| Body length | 4.90 mm BSC | Fab outline 4.90 mm | OK |
| Overall height | 1.75 mm max | Footprint name includes 1.75 mm | OK |
| Exposed pad | None for SOIC | None | OK |
The footprint is compatible with the SOIC-8 / SN package. The only footprint caveat is the pad width: the footprint uses 0.65 mm while the Microchip recommended land-pattern table lists X1 max 0.60 mm. This is a small CAD-library/IPC-style deviation, not a pinout error, but should be reviewed if strict Microchip land pattern compliance is required.
Recommended Fixes
- Set terminal Pin Type values:
- VOUTA, VOUTB: Output
- VINA-, VINA+, VINB-, VINB+: Input
- VSS, VDD: Power
- Add Pin Description properties from the datasheet pin function table.
- Optionally change Part Type from generic
Integrated Circuitsto a more specific operational-amplifier category if the library taxonomy supports it. - Decide whether to keep the existing 0.65 mm pad width as an IPC/library variant or revise to the Microchip recommended 0.60 mm width.
Conclusion
The MCP6V02-E/SN part is electrically and mechanically recognizable as the correct Microchip dual zero-drift op amp in SOIC-8. No MPN, manufacturer, pinout, pin count, or major footprint mismatch was found. Metadata quality can be improved by setting pin electrical types and descriptions, and the SOIC land pattern has a minor pad-width deviation from the Microchip recommended drawing.
Source Checked
Current Part Metadata
Key Datasheet Specs
Pinout Cross-Check
Symbol / Terminal Metadata Findings
Footprint Cross-Check
Recommended Fixes
Conclusion
