MCP6022 Part Audit

flux

Failed — part-level Datasheet URL was not changed.
  • Attempted to set the root part property, but the available property mutation resolved to an unrelated existing commit and did not update the URL.
  • Verification still reads: https://storage.googleapis.com/graviton-electric-symbols/document_assets/user-uploaded/c40cc51b2a1c5769c26d67160414d6d94b45f0f70b34a8e0b3a46335aa9d458d.pdf
  • Exactly what I changed: nothing persisted from this task.
  • Blocker: the available mutation interface does not reliably expose the part-project root Datasheet URL; terminal/component mutation must not be used because that would alter pin-level metadata.

flux

Audit complete against Microchip’s MCP6021/1R/2/3/4 datasheet (DS20001685).
  • Metadata: MPN MCP6022-I_P, Microchip Technology, dual rail-to-rail I/O op amp, 8-pin PDIP, industrial grade.
  • Key specs: 2.5–5.5 V supply, 10 MHz GBWP, 7 V/µs slew rate, −40°C to +125°C.
  • Symbol/pinout: All eight pin numbers, names, and electrical types match the datasheet.
  • Footprint: Correct 8-pin through-hole DIP topology and 2.54 mm pitch. The 7.87 mm row spacing differs from the conventional 7.62 mm nominal DIP footprint but remains within the package’s lead-span allowance; verify against the intended socket if socket mounting is required.
  • Flags: Explicit Pin Description properties appear absent, although terminal names/types are correct. Footprint reference/value text is unusually large and far outside the package.
  • Datasheet: A URL is already present, so no update was required. The current official PDF is Microchip DS20001685.
Fix docs and silk
Set datasheet URL
Add pin descriptions
Fix footprint text
Run final review
VINA+
Pin Number
3
VDD
Pin Number
8
VINA-
Pin Number
2
VOUTA
Pin Number
1
VINB+
Pin Number
5
VOUTB
Pin Number
7
VINB-
Pin Number
6
VSS
Pin Number
4

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    MCP6022-I_P

    MCP6022-I_P Symbol.svgDefault
    MCP6022-IP-thumb.png

    MCP6022-IP-thumb.png

    MCP6022-IP-thumbThumbnail
    MCP6022-I_P

    MCP6022-I_P

    MCP6022-I_P.stp3D Model

    MCP6022-I_P

    DIP787W46P254L927H533Q8.kicad_modFootprint

    MCP6022-I/P

    MCP6022-I/P thumbnail
    Dual Rail-to-Rail Operational Amplifier IC – Dual general-purpose CMOS operational amplifier with rail-to-rail input and output for signal conditioning, sensor interfaces, active filters, data acquisition, battery-powered devices, and embedded systems. Operates from a 2.5 V to 5.5 V single supply, featuring a 10 MHz gain-bandwidth product, 7 V/µs slew rate, 500 µV maximum input offset voltage (typical), 1 pA typical input bias current, and 30 mA output drive per channel. Designed for low-power operation with a 1 mA typical supply current per amplifier, it offers high input impedance, stable unity-gain performance, and rail-to-rail operation for maximizing dynamic range in low-voltage applications. Specified for operation over a −40°C to +85°C industrial temperature range and housed in an 8-pin PDIP through-hole package.
    #Microchip #MCP6022IP #MCP6022 #OperationalAmplifier #OpAmp #RailToRail #CMOSAmplifier #SignalConditioning #SensorInterface #ActiveFilter #EmbeddedSystems #PDIP8

    Properties

    MCP6022-I_P

    Microchip Technology

    Integrated Circuit

    microchip.com/downloads/en/DeviceDoc/20001685E.pdf

    U

    parametric-v1

    Pricing & Availability

    No results found.

    Controls