Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
I’ll audit the part metadata, find and attach the official datasheet if needed, then cross-check the symbol, footprint, and pin definitions against it.
The project has six terminals matching the expected pin count. I’m now checking project-level metadata and exact footprint geometry before comparing against the manufacturer documentation.
Audit complete. I added the official Analog Devices MAX16054 datasheet; the 6-pin TSOT-23 footprint and pin-number mapping match the datasheet.
Key specs: 2.7–5.5 V supply, 7 µA typical current, 50 ms typical debounce, ±25 V switch input, ±15 kV ESD protection, −40°C to +125°C.
Mismatches: MPN is stored as MAX16054AZT_T rather than official MAX16054AZT+T; CLEAR is marked bidirectional but should be an input; terminal Pin Description properties are missing.
Correct mappings: 1 IN, 2 GND, 3 CLEAR, 4 active-low OUT, 5 active-high OUT, 6 VCC. Footprint pitch and body geometry are consistent with package code Z6-1.