Pin Grouping by Function
Worked for 1 min 34 sec
Simplified the symbol into four general functional sections:
- Power
- Ground
- Regulators
- Control / Signals
All 36 pins and their original mappings were preserved.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation
Thought for 8 sec
I’ll map the symbol’s pin groups into ten ordered positions: Power first, Ground last, and distribute the eight intermediate groups across Left and Right while keeping each group internally adjacent.
Worked for 1 min 46 sec
Organized the symbol into 10 ordered groups:
- Power — Top
- Buck 1 — Left
- Buck 2 — Right
- LDO 1 — Left
- LDO 2 — Right
- LDO 3 — Left
- I²C — Right
- Configuration & Analog — Left
- Status & External — Right
- Ground — Bottom
Individual pins use unique Terminal Order values 1–36 to keep each group contiguous and render deterministically.
Review symbol layout
Verify terminal properties
Create symbol documentation
