Part Audit Report

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

Thought for 4 sec

flux

I’ll audit the part metadata, locate the official LM1815 datasheet if needed, update the Datasheet property, then compare the symbol, footprint, and pin definitions against the manufacturer documentation.

Worked for 3 mins 11 sec

Created a project doc

Part Audit Report

View Document

Part Audit Report Scope

Audit of the published LM1815N part metadata, 14-pin schematic symbol, PDIP footprint, and terminal definitions against the official Texas Instruments LM1815 datasheet (Rev. F, SNOSBU8F; package addendum dated 2025-11-11).

Official datasheet: https://www.ti.com/lit/ds/symlink/lm1815.pdf

Identification and metadata Key specifications

Function: adaptive variable-reluctance sensor amplifier with zero-crossing detection, adaptive hysteresis, one-shot reference pulse, and selectable gated timing output.
Operating supply: 2.5 V to 12 V from the electrical-characteristics table. The feature summary says operation from 2 V to 12 V; use 2.5 V as the characterized minimum.
Supply current: 3.6 mA typical, 6 mA maximum under the stated test conditions.

flux

Audit complete. I added the official TI datasheet URL and confirmed all 14 pin numbers/functions match; key issues are missing manufacturer/package metadata, unspecified pin types/descriptions, obsolete PDIP status, and a footprint drill definition that needs verification.

Full findings: Part Audit Report.

Fix metadata and pins

Verify footprint drills

Complete part cleanup

Normalize MPN

Files

Pins

Symbol

Layout

3D View

LM1815N/NOPB